9 Mar
2017
9 Mar
'17
4:39 p.m.
Dear Mr/Ms,
I meet errors when use osmocom sink and source in GNU Radio, I have tried BladeRF and
HackRF, and I use Ubuntu 16.04.
1.When I use BladeRF, I set the parameters as
"bladerf=701c2ce1da297914cb29695ba79fac54,fpga=<'/Users/qiuyuexue/Documents/BladeRF/hostedx115-latest.rbf'>,fpga-reload=1,buffers=32,buflen=4096,transfers=16,stream_timeout_ms=3000,loopback=none,verbosity=silent,xb200.”
and I got error as:
“(top_block.py:4795): IBUS-WARNING **: The owner of /home/ceca_517/.config/ibus/bus is not
root!
gr-osmosdr v0.1.4-86-ge9dde9af (0.1.5git) gnuradio 3.7.10
built-in sink types: hackrf bladerf redpitaya file
Opening nuand bladeRF with device identifier string:
"*:serial=701c2ce1da297914cb29695ba79fac54"
[bladeRF sink] Loading FPGA bitstream
</home/ceca_517/LPWAN/SOAR(a)PKU/LPWAN/BladeRF/hostedx115-latest.rbf>bf>...
[bladeRF sink] bladerf_load_fpga has failed with -11
[bladeRF sink] Warning: 'loopback' has been specified on a bladeRF sink, and will
have no effect. This parameter should be specified on the associated bladeRF
source."
2.when I use HackRF, I set the parameter as
"hackrf=393b4b,bias=1,bias_tx=1,buffers=32.”
and I got error as:
"(top_block.py:5108): IBUS-WARNING **: The owner of /home/ceca_517/.config/ibus/bus
is not root!
gr-osmosdr v0.1.4-86-ge9dde9af (0.1.5git) gnuradio 3.7.10
built-in sink types: hackrf bladerf redpitaya file
FATAL: bad lexical cast: source type value could not be interpreted as target
Trying to fill up 1 missing channel(s) with null sink(s).
This is being done to prevent the application from crashing
due to gnuradio bug #528.”
I want to know if I set the parameters wrong? Or anything else? Thanks a lot for your help
and your time! Thanks very much!!
Best,
Qiuyue