[rtl-sdr] store frequency correction in eeprom?

Some of you are probably using multiple dongles with alternating applications as well. Regarding the frequency correction, I put a sticker on each dongle and wrote the ppm value on it. However manually setting the value in each application is still annoying. So I used rtl_eeprom to write the value into the product-ID with the following format: "RTL%+dppm" resulting in sth. like this: RTL+87ppm I'm not sure if this is the best way to do it, but this approach works without changing librtlsdr. Another option might be storing the value in a non-used eeprom location and adding get/set functions to librtlsdr. Is it possible to write arbitrary values to unused eeprom locations without fucking up the realtek eeprom handling? Do you think this would be a better way? I'd like to hear your comments on this. It would be awesome if we could find a solution that many existing applications could incorporate. (Of course the ppm value still changes with temperature, but having a base value is still closer to the truth than 0ppm I'd say. I measured the offset directly after grabbing samples for 20 minutes at room-temperature and jitter is <1ppm.) Best regards, Hunz