osmocom-sdr April 2013

osmocom-sdr@lists.osmocom.org

25 participants
26 discussions

by Wojciech Kazubski

Hello! Fo some time I am unable to build gr-osmosdr with enabled documentation. ... cmake -DCMAKE_INSTALL_PREFIX=/usr -DENABLE_DOXYGEN=1 ../ make -j2 ... The build fails with the following error: ... [ 151s] [ 26%] Built target doxygen_target [ 151s] Scanning dependencies of target osmosdr_swig_swig_doc [ 151s] [ 30%] Generating doxygen xml for osmosdr_swig_doc docs [ 151s] /bin/sh: osmosdr_swig_doc_swig_docs/Doxyfile: Permission denied [ 151s] make[2]: *** [swig/osmosdr_swig_doc_swig_docs/xml/index.xml] Error 126 [ 151s] make[1]: *** [swig/CMakeFiles/osmosdr_swig_swig_doc.dir/all] Error 2 [ 151s] make[1]: *** Waiting for unfinished jobs.... ... This happen after this commit: http://cgit.osmocom.org/gr-osmosdr/commit/?id=dc28f6c4c874e182557c8cb9fe8a0… (the last one from Feb 16 2013) For me, it looks like an attempt to run Doxyfile directly and not process it by doxygen. Wojciech Kazubski

11 years, 11 months

RTL offset with kalibrate-rtl

by Nuno Gonçalves

I have a stick with the R820T Tunner. Using SDR# and SDR-Radio V2, and tunning to FRS and Airband transmitters I determined that my offset is consistent to 54-63 PPM. On the other hand kalibrate-rtl reports my offset to be about -30PPM, also consistently accross several tests. Is there possibly any difference from 100 (Airband), 400 (FRS) and 900ish (GSM) Mhz? I am at Portugal, so the network is probably a GSM900 and also I don't get something as NOAA narrow channels to figure this out. GSM-900: chan: 10 (937.0MHz + 27.986kHz) power: 29372.03 chan: 30 (941.0MHz + 26.850kHz) power: 197782.82 chan: 50 (945.0MHz + 26.645kHz) power: 86521.18 chan: 62 (947.4MHz + 27.109kHz) power: 29501.15 chan: 74 (949.8MHz + 26.605kHz) power: 56078.03 chan: 107 (956.4MHz + 26.442kHz) power: 57536.25 chan: 112 (957.4MHz + 25.319kHz) power: 31011.95 chan: 121 (959.2MHz + 25.145kHz) power: 87002.34 E-GSM-900: chan: 10 (937.0MHz + 27.514kHz) power: 27631.40 chan: 30 (941.0MHz + 26.395kHz) power: 211497.68 chan: 50 (945.0MHz + 26.209kHz) power: 88871.46 chan: 62 (947.4MHz + 26.629kHz) power: 27770.99 chan: 74 (949.8MHz + 26.181kHz) power: 56274.60 chan: 107 (956.4MHz + 25.984kHz) power: 47437.43 chan: 112 (957.4MHz + 24.878kHz) power: 25791.29 chan: 121 (959.2MHz + 24.765kHz) power: 98473.19 What can be going on here? Also, what is the reason for the dropped samples when sampling over 2.8MS/s? Is it a RTL2832 issue or something related to the USB driver? Regards, Nuno

11 years, 11 months

[PATCH] rtl-sdr: add support for lib64 (e.g. Fedora)

by Jaroslav Skarvada

From: "Jaroslav Škarvada" <jskarvad(a)redhat.com> To: laforge(a)gnumonks.org Cc: "Jaroslav Škarvada" <jskarvad(a)redhat.com> Sent: Thursday, April 4, 2013 3:36:18 PM Subject: [PATCH] rtl-sdr: add support for lib64 (e.g. Fedora) Another possibility is to use the GrPlatform.cmake module. Signed-off-by: Jaroslav Škarvada <jskarvad(a)redhat.com> --- CMakeLists.txt | 8 ++++++-- src/CMakeLists.txt | 4 ++-- 2 files changed, 8 insertions(+), 4 deletions(-) diff --git a/CMakeLists.txt b/CMakeLists.txt index f3ef31e..b113311 100644 --- a/CMakeLists.txt +++ b/CMakeLists.txt @@ -33,6 +33,10 @@ set(CMAKE_BUILD_TYPE ${CMAKE_BUILD_TYPE} CACHE STRING "") list(APPEND CMAKE_MODULE_PATH ${CMAKE_SOURCE_DIR}/cmake/Modules) +if(NOT LIB_INSTALL_DIR) + set(LIB_INSTALL_DIR lib) +endif() + ######################################################################## # Compiler specific setup ######################################################################## @@ -130,7 +134,7 @@ ENDIF(CMAKE_CROSSCOMPILING) set(prefix ${CMAKE_INSTALL_PREFIX}) set(exec_prefix \${prefix}) -set(libdir \${exec_prefix}/lib) +set(libdir \${exec_prefix}/${LIB_INSTALL_DIR}) set(includedir \${prefix}/include) CONFIGURE_FILE( @@ -140,5 +144,5 @@ CONFIGURE_FILE( INSTALL( FILES ${CMAKE_CURRENT_BINARY_DIR}/librtlsdr.pc - DESTINATION lib/pkgconfig + DESTINATION ${LIB_INSTALL_DIR}/pkgconfig ) diff --git a/src/CMakeLists.txt b/src/CMakeLists.txt index 6b23395..4b91a4b 100644 --- a/src/CMakeLists.txt +++ b/src/CMakeLists.txt @@ -126,7 +126,7 @@ endif() # Install built library files & utilities ######################################################################## install(TARGETS ${INSTALL_TARGETS} - LIBRARY DESTINATION lib${LIB_SUFFIX} # .so/.dylib file - ARCHIVE DESTINATION lib${LIB_SUFFIX} # .lib file + LIBRARY DESTINATION ${LIB_INSTALL_DIR} # .so/.dylib file + ARCHIVE DESTINATION ${LIB_INSTALL_DIR} # .lib file RUNTIME DESTINATION bin # .dll file ) -- 1.8.1.4

11 years, 11 months

Re: osmocom-sdr Digest, Vol 17, Issue 3

by Peter Stuge

Thomas Stowe wrote: > Great, admin failure on the list. I'm unsubscribing, fuck this shit. A shame to see such a strong contributor leave. //Peter

11 years, 11 months

feedback: Terratec ran - T Stick+

by Thomas Osterried

Hello, my feedback to http://sdr.osmocom.org/trac/wiki/rtl-sdr and the list of working devices: I buyed a "Terratec ran - T Stick+". It's working. lsusb shows the following IDs: Bus 005 Device 033: ID 0ccd:00d7 TerraTec Electronic GmbH It's a DVB / DAB/DAB+ stick (what ever this means - it's all about SDR ;). Buyed it at conrad for < 20 Eur. I found the device reading http://lehwalder.wordpress.com/2012/12/31/sdr-software-defined-radio/ It's already mentioned in http://www.randomprojects.org/wiki/Software_defined_radio#Terratec_ran_T_St… Thank you for your good work.. - Thomas

11 years, 11 months

[PATCH 1/2] doxygen package needs to be detetected before the doxygen is used

by Jaroslav Škarvada

Without this patch the DOXYGEN_EXECUTABLE is set too late which results in build failure when processing swig directory (with ENABLE_DOXYGEN). Signed-off-by: Jaroslav Škarvada <jskarvad(a)redhat.com> --- CMakeLists.txt | 1 + docs/CMakeLists.txt | 5 ----- 2 files changed, 1 insertion(+), 5 deletions(-) diff --git a/CMakeLists.txt b/CMakeLists.txt index a9334c8..a1af563 100644 --- a/CMakeLists.txt +++ b/CMakeLists.txt @@ -116,6 +116,7 @@ find_package(GnuradioFCD) find_package(LibOsmoSDR) find_package(LibRTLSDR) find_package(LibMiriSDR) +find_package(Doxygen) if(NOT GRUEL_FOUND) message(FATAL_ERROR "Gruel required to compile osmosdr") diff --git a/docs/CMakeLists.txt b/docs/CMakeLists.txt index f16fbf6..446b86a 100644 --- a/docs/CMakeLists.txt +++ b/docs/CMakeLists.txt @@ -18,11 +18,6 @@ # Boston, MA 02110-1301, USA. ######################################################################## -# Setup dependencies -######################################################################## -find_package(Doxygen) - -######################################################################## # Begin conditional configuration ######################################################################## if(ENABLE_DOXYGEN) -- 1.8.1.4

11 years, 11 months

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

osmocom-sdr April 2013