25 May
2009
25 May
'09
3:22 p.m.
did you load hfcmulti.ko with dslot=1 parameter? this is required to
move dchannel slot from 16 to 1.
Mon May 25 16:07:39 2009 <1000>
input/misdn.c:125 alen =6, dev(0)
channel(0) sapi(63) tei(127)
Mon May 25 16:07:39 2009 <1000>
input/misdn.c:128 <= len = 12,
prim(0x8) id(0x7f3f): DL_INFORMATION_IND
Mon May 25 16:07:39 2009 <1000>
input/misdn.c:135 DL_INFORMATION_IND:
use channel(0) sapi(63) tei(127) for now
ISDN message for unknown sign_link
25 May
25 May
3:31 p.m.
New subject: Problem testing E1 link
I have this in the /boot/grub/menu.lst and it doesn't display any error at
restart.
title Debian GNU/Linux, kernel 2.6.27.4
root (hd0,0)
kernel /boot/vmlinuz-2.6.27.4 root=/dev/hda1 hfcmulti.dslot=1 ro
quiet
initrd /boot/initrd.img-2.6.27.4
2009/5/25 Andreas.Eversberg <Andreas.Eversberg(a)versatel.de>
did you load hfcmulti.ko with dslot=1 parameter? this
is required to move
dchannel slot from 16 to 1.
Mon May 25 16:07:39 2009 <1000>
input/misdn.c:125 alen =6, dev(0)
channel(0) sapi(63) tei(127)
Mon May 25 16:07:39 2009 <1000>
input/misdn.c:128 <= len = 12,
prim(0x8) id(0x7f3f): DL_INFORMATION_IND
Mon May 25 16:07:39 2009 <1000>
input/misdn.c:135 DL_INFORMATION_IND:
use channel(0) sapi(63) tei(127) for now
ISDN message for unknown sign_link
4:25 p.m.
New subject: Problem testing E1 link
I just noticed something more: the red led are steady at reboot and when
configuring bs11 (bs11_config) and when I launch the bsc_hack, the led start
to blink.
I followed the jumperplan from Beronet but I think there is something wrong
cause if the card I can see on the following link is also a BN1E1 I don t
have the same locations.
http://bs11-abis.gnumonks.org/trac/attachment/wiki/HFC-E1/hfc_e1_evalbd_jum…
I will try this one and let u know
2009/5/25 Eric Cathelinaud <e.cathelinaud(a)googlemail.com>
I have this in the /boot/grub/menu.lst and it
doesn't display any error at
restart.
title Debian GNU/Linux, kernel 2.6.27.4
root (hd0,0)
kernel /boot/vmlinuz-2.6.27.4 root=/dev/hda1 hfcmulti.dslot=1 ro
quiet
initrd /boot/initrd.img-2.6.27.4
2009/5/25 Andreas.Eversberg <Andreas.Eversberg(a)versatel.de>
did you load hfcmulti.ko with dslot=1 parameter? this is required to move
dchannel slot from 16 to 1.
Mon May 25 16:07:39 2009 <1000>
input/misdn.c:125 alen =6, dev(0)
channel(0) sapi(63) tei(127)
Mon May 25 16:07:39 2009 <1000>
input/misdn.c:128 <= len = 12,
prim(0x8) id(0x7f3f): DL_INFORMATION_IND
Mon May 25 16:07:39 2009 <1000>
input/misdn.c:135 DL_INFORMATION_IND:
use channel(0) sapi(63) tei(127) for now
ISDN message for unknown sign_link
5:39 p.m.
New subject: Problem testing E1 link
Well i tried every possibilities with the jumpers giving the same result:
red steady at start and red blinking after bsc_hack.
Following the jumper plan
http://www.beronet.com/download/docs/BNXE1/BN1E1_Jumperplan.pdf
I should normally have:
C2 on the left (pin 1,2,4,5)
C1 on the right (NT)
D-1: 1-ON / 2-OFF
So I came back on my first jumper configuration.
I checked also the RJ45 link on my BTS
- Y01 PCM in (from BSC): RJ45 pin 4,5
- Y02 PCM out (to BSC): RJ45 pin 1,2
which is Y01 : blue/white blue and Y02 : orange/white orange for a straight
cable
I noticed something else but don't know if will help:
After reboot, when launching bsc_hack for the first time, the protocol is 0
and, when launching bsc_hack after, it's everytimes equal to 4.
Best regards
Eric Cathelinaud
2009/5/25 Eric Cathelinaud <e.cathelinaud(a)googlemail.com>
I just noticed something more: the red led are steady
at reboot and when
configuring bs11 (bs11_config) and when I launch the bsc_hack, the led start
to blink.
I followed the jumperplan from Beronet but I think there is something wrong
cause if the card I can see on the following link is also a BN1E1 I don t
have the same locations.
http://bs11-abis.gnumonks.org/trac/attachment/wiki/HFC-E1/hfc_e1_evalbd_jum…
I will try this one and let u know
2009/5/25 Eric Cathelinaud <e.cathelinaud(a)googlemail.com>
I have this in the /boot/grub/menu.lst and it doesn't display any error at
restart.
title Debian GNU/Linux, kernel 2.6.27.4
root (hd0,0)
kernel /boot/vmlinuz-2.6.27.4 root=/dev/hda1 hfcmulti.dslot=1 ro
quiet
initrd /boot/initrd.img-2.6.27.4
2009/5/25 Andreas.Eversberg <Andreas.Eversberg(a)versatel.de>
did you load hfcmulti.ko with dslot=1 parameter? this is required to
move dchannel slot from 16 to 1.
Mon May 25 16:07:39 2009 <1000>
input/misdn.c:125 alen =6, dev(0)
channel(0) sapi(63) tei(127)
Mon May 25 16:07:39 2009 <1000>
input/misdn.c:128 <= len = 12,
prim(0x8) id(0x7f3f): DL_INFORMATION_IND
Mon May 25 16:07:39 2009 <1000>
input/misdn.c:135 DL_INFORMATION_IND:
use channel(0) sapi(63) tei(127) for now
ISDN message for unknown sign_link
26 May
26 May
8:51 p.m.
New subject: Problem testing E1 link
On Mon, May 25, 2009 at 04:25:10PM +0200, Eric Cathelinaud wrote:
I just noticed something more: the red led are steady
at reboot and when
configuring bs11 (bs11_config) and when I launch the bsc_hack, the led start
to blink.
yes, this is correect. I think the linux kernel driver should probably
use the LED's in a more useful way, i.e. indicate layer 1 up/down or
TEI layer up/down.... but well, nobody is perfect and it didn't bother
me enough to come up with a patch.
--
- Harald Welte <laforge(a)gnumonks.org> http://laforge.gnumonks.org/
============================================================================
"Privacy in residential applications is a desirable marketing option."
(ETSI EN 300 175-7 Ch. A6)
5470
days inactive
5471
days old
4 comments
3 participants
participants (3)
-
Andreas.Eversberg -
Eric Cathelinaud -
Harald Welte