you don't need that patch. you can configure the hfcmulti.ko using dmask and bmask:
* dmask and bmask:
* NOTE: One dmask value must be given for every HFC-E1 card.
* If omitted, the E1 card has D-channel on time slot 16, which is default.
* dmask is a 32 bit mask. The bit must be set for an alternate time slot.
* If multiple bits are set, multiple virtual card fragments are created.
* For each bit set, a bmask value must be given. Each bit on the bmask
* value stands for a B-channel. The bmask may not overlap with dmask or
* with other bmask values for that card.
* Example: dmask=0x00020002 bmask=0x0000fffc,0xfffc0000
* This will create one fragment with D-channel on slot 1 with
* B-channels on slots 2..15, and a second fragment with D-channel
* on slot 17 with B-channels on slot 18..31. Slot 16 is unused.
* If bit 0 is set (dmask=0x00000001) the D-channel is on slot 0 and will
* not function.
* Example: dmask=0x00000001 bmask=0xfffffffe
* This will create a port with all 31 usable timeslots as
* B-channels.
* If no bits are set on bmask, no B-channel is created for that fragment.
* Example: dmask=0xfffffffe bmask=0,0,0,0.... (31 0-values for bmask)
* This will create 31 ports with one D-channel only.
* If you don't know how to use it, you don't need it!
hope this helps
-----Ursprüngliche Nachricht-----
Von: openbsc-bounces(a)lists.gnumonks.org [mailto:openbsc-bounces@lists.gnumonks.org] Im
Auftrag von Thomas Ansorg
Gesendet: Freitag, 7. Januar 2011 12:39
An: openBSC-Mailingliste
Betreff: applying multibts-patch
hello
i downloaded kernelversion 2.6.30 from
www.kernel.org for using the
linux-2.6.30-hfcmulti-multibts.patch on it. unfortunately, some hunks in
the c-file failed. where can i download a kernel that fits to that
patch?
T.
--
Wer Rechtschreibfehler findet, darf sie behalten!