AW: applying multibts-patch

you don't need that patch. you can configure the hfcmulti.ko using dmask and bmask: * dmask and bmask: * NOTE: One dmask value must be given for every HFC-E1 card. * If omitted, the E1 card has D-channel on time slot 16, which is default. * dmask is a 32 bit mask. The bit must be set for an alternate time slot. * If multiple bits are set, multiple virtual card fragments are created. * For each bit set, a bmask value must be given. Each bit on the bmask * value stands for a B-channel. The bmask may not overlap with dmask or * with other bmask values for that card. * Example: dmask=0x00020002 bmask=0x0000fffc,0xfffc0000 * This will create one fragment with D-channel on slot 1 with * B-channels on slots 2..15, and a second fragment with D-channel * on slot 17 with B-channels on slot 18..31. Slot 16 is unused. * If bit 0 is set (dmask=0x00000001) the D-channel is on slot 0 and will * not function. * Example: dmask=0x00000001 bmask=0xfffffffe * This will create a port with all 31 usable timeslots as * B-channels. * If no bits are set on bmask, no B-channel is created for that fragment. * Example: dmask=0xfffffffe bmask=0,0,0,0.... (31 0-values for bmask) * This will create 31 ports with one D-channel only. * If you don't know how to use it, you don't need it! hope this helps -----Ursprüngliche Nachricht----- Von: openbsc-bounces(a)lists.gnumonks.org [mailto:openbsc-bounces@lists.gnumonks.org] Im Auftrag von Thomas Ansorg Gesendet: Freitag, 7. Januar 2011 12:39 An: openBSC-Mailingliste Betreff: applying multibts-patch hello i downloaded kernelversion 2.6.30 from www.kernel.org for using the linux-2.6.30-hfcmulti-multibts.patch on it. unfortunately, some hunks in the c-file failed. where can i download a kernel that fits to that patch? T. -- Wer Rechtschreibfehler findet, darf sie behalten!