25 May
2012
25 May
'12
7:47 p.m.
Hi!
I'm trying to install OpenBSC+LCR. I'm following the next tutorial:
http://openbsc.osmocom.org/trac/wiki/OpenBSC_LCR
I have installed libosmocore and openbsc but I can't install lcr. I tried to apply
patch from tutorial but it doesn't works, maybe version is so old because gsm_bs.cpp
is not the same. When run configure terminal shows:
configure: error: in '/home/rivas/OpenBSC/lcr'
configure: error: --with-asterisk was given, but test for header-file asterisk/compiler.h
failed
I have new Ubuntu 12.04 and I have install asterisk from apt-get repository.
Someone can help me? Also I need to know if there is a tutorial recently actualized.
Best regards,
Arturo Rivas.
29 May
29 May
9:58 a.m.
On 05/25/2012 07:47 PM, Arturo Rivas wrote:
configure: error: in
'/home/rivas/OpenBSC/lcr'
configure: error: --with-asterisk was given, but test for header-file
asterisk/compiler.h failed
I have new Ubuntu 12.04 and I have install asterisk from apt-get repository.
Someone can help me? Also I need to know if there is a tutorial recently
actualized.
You need the header files from asterisk. Try apt-get install asterisk-dev.
Regards,
Rogier
30 May
30 May
8:41 p.m.
Thank you Rogier,
I have a new problem. I continued try to install lcr but I need mISND
module. When I run configure in mISDN directory, after clone git
repository, terminal shows:
*configure: error: kernel build tree does not exist
build:/lib/modules/3.2.0-24-generic-pae/build /
source:/lib/modules/3.2.0-24-generic-pae/source*
I don't know what I have to do!
2012/5/29 Rogier van Eeten <rogier(a)virtunix.nl>
On 05/25/2012 07:47 PM, Arturo Rivas wrote:
configure: error: in '/home/rivas/OpenBSC/lcr'
configure: error: --with-asterisk was given, but
test for header-file
asterisk/compiler.h failed
I have new Ubuntu 12.04 and I have install asterisk from apt-get
repository.
Someone can help me? Also I need to know if there is a tutorial recently
actualized.
You need the header files from asterisk. Try apt-get install asterisk-dev.
Regards,
Rogier
9:08 p.m.
On 05/30/2012 08:41 PM, Arturo Rivas wrote:
I have a new problem. I continued try to install lcr but I need mISND
module. When I run configure in mISDN directory, after clone git
repository, terminal shows:
/configure: error: kernel build tree does not exist
build:/lib/modules/3.2.0-24-generic-pae/build /
source:/lib/modules/3.2.0-24-generic-pae/source/
I don't know what I have to do!
Wel, actually, the error says it all. You don't have the build tree of
your running kernel. Try installing a package like
linux-headers-3.2.0-24-genereric-pae :)
9:13 p.m.
Thank you but I tried it but doesn't worked!
Regards,
Arturo Rivas Arias
El 30/05/2012, a las 21:11, Rogier van Eeten <rogier(a)virtunix.nl> escribió:
On 05/30/2012 08:41 PM, Arturo Rivas wrote:
I have a new problem. I continued try to install lcr but I need mISND
module. When I run configure in mISDN directory, after clone git
repository, terminal shows:
/configure: error: kernel build tree does not exist
build:/lib/modules/3.2.0-24-generic-pae/build /
source:/lib/modules/3.2.0-24-generic-pae/source/
I don't know what I have to do!
Wel, actually, the error says it all. You don't have the build tree of your running
kernel. Try installing a package like linux-headers-3.2.0-24-genereric-pae :)
31 May
31 May
2:36 p.m.
On 30.05.2012 21:13, Arturo Rivas wrote:
Thank you but I tried it but doesn't worked!
Dear Arturo,
I added a brief installation guide to the openBSC wiki:
http://openbsc.osmocom.org/trac/wiki/OpenBSC_LCR_Ubuntu12.04
This installation guide was tested with Ubuntu 12.04. Please use a 32
Bit version of Ubuntu. Otherwise LCR will not work.
I hope this helps.
Best Regards
Konrad
7:27 p.m.
Thank you very much! It's just what I needed!
I have a new problem when I make lcr:
*
bchannel.c:26:27: fatal error: mISDN/mISDNif.h: No such file or directory
compilation terminated.
make[1]: *** [bchannel.po] Error 1
make[1]: Leaving directory `/home/rivas/GSM/lcr'
make: *** [all] Error 2*
I'm following all there steps but...
2012/5/31 Konrad Meier <meierk(a)informatik.uni-freiburg.de>
On 30.05.2012 21:13, Arturo Rivas wrote:
Thank you but I tried it but doesn't worked!
Dear Arturo,
I added a brief installation guide to the openBSC wiki:
http://openbsc.osmocom.org/**trac/wiki/OpenBSC_LCR_**Ubuntu12.04<http://…
This installation guide was tested with Ubuntu 12.04. Please use a 32 Bit
version of Ubuntu. Otherwise LCR will not work.
I hope this helps.
Best Regards
Konrad
4 Jun
4 Jun
12:46 p.m.
Hello list!
Thanks a lot for the guide. Finally I can compile all programs successfully.
But I have another problem. I don't find *gsm.conf* file. In addition I
followed all steps but when I start LCR:
*** LCR Version 1.10*
*
*
*ERROR (in main() line 259) Error in /usr/local/lcr/options.conf (line
100): wrong option keyword gsm.*
Tutorial indicates that it's necessary write *gsm* in the *options.conf* for
activate GSM option. I don't know if the problem is *gsm.conf* file missing.
Best regards,
Arturo Rivas
2012/5/31 Arturo Rivas <pfc.rivas(a)gmail.com>
Thank you very much! It's just what I needed!
I have a new problem when I make lcr:
*
bchannel.c:26:27: fatal error: mISDN/mISDNif.h: No such file or directory
compilation terminated.
make[1]: *** [bchannel.po] Error 1
make[1]: Leaving directory `/home/rivas/GSM/lcr'
make: *** [all] Error 2*
I'm following all there steps but...
2012/5/31 Konrad Meier <meierk(a)informatik.uni-freiburg.de>
On 30.05.2012 21:13, Arturo Rivas wrote:
Thank you but I tried it but doesn't worked!
Dear Arturo,
I added a brief installation guide to the openBSC wiki:
http://openbsc.osmocom.org/**trac/wiki/OpenBSC_LCR_**Ubuntu12.04<http://…
This installation guide was tested with Ubuntu 12.04. Please use a 32 Bit
version of Ubuntu. Otherwise LCR will not work.
I hope this helps.
Best Regards
Konrad
2:57 p.m.
On 04.06.2012 12:46, Arturo Rivas wrote:
Tutorial indicates that it's necessary write /gsm/
in the
/options.conf/ for activate GSM option. I don't know if the problem is
/gsm.conf/ file missing.
The "gsm" statement in options.conf is no longer needed. It was removed
some time ago. Also the gsm.conf is no longer required.
Best regards
Konrad
4:32 p.m.
Sorry for so many questions!
When I start LCR terminal shows:
*ERROR (in mncc_socket_retry_cb() line 1102) Could not connect to MNCC
socket /tmp/bsc_mncc, retrying in 5 seconds*
*layer3_thread read socket error No space left on device*
*ERROR Port 1 already in use by LCR. You can't use a NT port multiple times.
*
*
*
One question more, are there documentation about how works each program?
I'm trying to install and configure nanoBTS, OpenBSC and Asterisk but I
would like to know how does it's work for implement new possibilities.
2012/6/4 Konrad Meier <meierk(a)informatik.uni-freiburg.de>
On 04.06.2012 12:46, Arturo Rivas wrote:
Tutorial indicates that it's necessary write
/gsm/ in the
/options.conf/ for activate GSM option. I don't know if the problem is
/gsm.conf/ file missing.
The "gsm" statement in options.conf is no longer needed. It was removed
some time ago. Also the gsm.conf is no longer required.
Best regards
Konrad
5 Jun
5 Jun
5:41 p.m.
Hi!
All programs was compiled correctly buy when I try to execute lcr:
rivas@pfc:~$ sudo /opt/lcr/sbin/lcr start
** LCR Version 1.10
000000 DEBUG (in getrulesetbyname() line 1871): ruleset main found.
000000 DEBUG (in mISDNloop_open() line 36): Open external interface of loopback.
000000 DEBUG (in mISDNport_open() line 2388): Port has 30 b-channels.
000000 DEBUG (in mISDNport_open() line 2409): using 'mISDN_dsp.o' module
000000 TRACE 05.06.12 17:36:19.305 CH: PORT (open) port 1 mode network channels 30
000000 ERROR (in mncc_socket_retry_cb() line 1102): Could not connect to MNCC socket
/tmp/bsc_mncc, retrying in 5 seconds
LCR 1.10 started, waiting for calls...
000000 TRACE 05.06.12 17:36:19.326 --: LCR 1.10 started, waiting for calls...
000000 TRACE 05.06.12 17:36:20.480 --: REMOTE APP registers app name=asterisk
000000 ERROR (in mncc_socket_retry_cb() line 1102): Could not connect to MNCC socket
/tmp/bsc_mncc, retrying in 5 seconds
I init interfaces with:
rivas@pfc:~$ sudo modprobe mISDN_l1loop pri=1 nchannel=30
Please help and thanks for previously answers.
Best regards,
Arturo Rivas
El 04/06/2012, a las 14:57, Konrad Meier escribió:
On 04.06.2012 12:46, Arturo Rivas wrote:
Tutorial indicates that it's necessary write
/gsm/ in the
/options.conf/ for activate GSM option. I don't know if the problem is
/gsm.conf/ file missing.
The "gsm" statement in options.conf is no longer needed. It was removed some
time ago. Also the gsm.conf is no longer required.
Best regards
Konrad
6:19 p.m.
On 05.06.2012 17:41, Arturo Rivas wrote:
Hi!
All programs was compiled correctly buy when I try to execute lcr:
/rivas@pfc:~$ sudo /opt/lcr/sbin/lcr start/
/
/
/** LCR Version 1.10/
/
/
/000000 DEBUG (in getrulesetbyname() line 1871): ruleset main found./
/000000 DEBUG (in mISDNloop_open() line 36): Open external interface of
loopback./
/000000 DEBUG (in mISDNport_open() line 2388): Port has 30 b-channels./
/000000 DEBUG (in mISDNport_open() line 2409): using 'mISDN_dsp.o' module/
/000000 TRACE 05.06.12 17:36:19.305 CH: PORT (open) port 1 mode network
channels 30/
/000000 ERROR (in mncc_socket_retry_cb() line 1102): Could not connect
to MNCC socket /tmp/bsc_mncc, retrying in 5 seconds/
/LCR 1.10 started, waiting for calls.../
/000000 TRACE 05.06.12 17:36:19.326 --: LCR 1.10 started, waiting for
calls.../
/000000 TRACE 05.06.12 17:36:20.480 --: REMOTE APP registers app
name=asterisk/
/000000 ERROR (in mncc_socket_retry_cb() line 1102): Could not connect
to MNCC socket /tmp/bsc_mncc, retrying in 5 seconds/
This output looks ok. You have to start the BSC software "osmo-nitb".
The BSC is no longer integrated into LCR.
Regards
Konrad
8 Jun
8 Jun
11:27 a.m.
Hi!
I've already start osmo-nitb and it's working correctly but still not
connect with mncc socket.
2012/6/5 Konrad Meier <meierk(a)informatik.uni-freiburg.de>
On 05.06.2012 17:41, Arturo Rivas wrote:
Hi!
All programs was compiled correctly buy when I try to execute lcr:
/rivas@pfc:~$ sudo /opt/lcr/sbin/lcr start/
/
/
/** LCR Version 1.10/
/
/
/000000 DEBUG (in getrulesetbyname() line 1871): ruleset main found./
/000000 DEBUG (in mISDNloop_open() line 36): Open external interface of
loopback./
/000000 DEBUG (in mISDNport_open() line 2388): Port has 30 b-channels./
/000000 DEBUG (in mISDNport_open() line 2409): using 'mISDN_dsp.o' module/
/000000 TRACE 05.06.12 17:36:19.305 CH: PORT (open) port 1 mode network
channels 30/
/000000 ERROR (in mncc_socket_retry_cb() line 1102): Could not connect
to MNCC socket /tmp/bsc_mncc, retrying in 5 seconds/
/LCR 1.10 started, waiting for calls.../
/000000 TRACE 05.06.12 17:36:19.326 --: LCR 1.10 started, waiting for
calls.../
/000000 TRACE 05.06.12 17:36:20.480 --: REMOTE APP registers app
name=asterisk/
/000000 ERROR (in mncc_socket_retry_cb() line 1102): Could not connect
to MNCC socket /tmp/bsc_mncc, retrying in 5 seconds/
This output looks ok. You have to start the BSC software "osmo-nitb".
The BSC is no longer integrated into LCR.
Regards
Konrad
1:48 p.m.
Hi
Did you start osmo-nitb with the "-m" Option?
"-m --mncc-sock Disable built-in MNCC handler and offer socket"
Regards
Ulrich
On 08.06.2012 11:27, Arturo Rivas wrote:
Hi!
I've already start osmo-nitb and it's working correctly but still not
connect with mncc socket.
2012/6/5 Konrad Meier <meierk(a)informatik.uni-freiburg.de
<mailto:meierk@informatik.uni-freiburg.de>>
On 05.06.2012 17:41, Arturo Rivas wrote:
Hi!
All programs was compiled correctly buy when I try to execute lcr:
/rivas@pfc:~$ sudo /opt/lcr/sbin/lcr start/
/
/
/** LCR Version 1.10/
/
/
/000000 DEBUG (in getrulesetbyname() line 1871): ruleset main
found./
/000000 DEBUG (in mISDNloop_open() line 36): Open external
interface of
loopback./
/000000 DEBUG (in mISDNport_open() line 2388): Port has 30
b-channels./
/000000 DEBUG (in mISDNport_open() line 2409): using
'mISDN_dsp.o' module/
/000000 TRACE 05.06.12 17:36:19.305 CH: PORT (open) port 1
mode network
channels 30/
/000000 ERROR (in mncc_socket_retry_cb() line 1102): Could not
connect
to MNCC socket /tmp/bsc_mncc, retrying in 5 seconds/
/LCR 1.10 started, waiting for calls.../
/000000 TRACE 05.06.12 17:36:19.326 --: LCR 1.10 started,
waiting for
calls.../
/000000 TRACE 05.06.12 17:36:20.480 --: REMOTE APP registers app
name=asterisk/
/000000 ERROR (in mncc_socket_retry_cb() line 1102): Could not
connect
to MNCC socket /tmp/bsc_mncc, retrying in 5 seconds/
This output looks ok. You have to start the BSC software "osmo-nitb".
The BSC is no longer integrated into LCR.
Regards
Konrad
--
_______________________________________________________________________
Ulrich Meckel
Entwicklung Mail: Meckel(a)netzing.de
NETZING Solutions AG Tel.: 0351/41381 - 0
Fröbelstr. 57, 01159 Dresden Fax: 0351/41381 - 12
_______________________________________________________________________
Impressum:
NETZING Solutions AG - Fröbelstraße 57 - 01159 Dresden
Sitz der Gesellschaft Amtsgericht Dresden HRB 18926
Vorstand Dieter Schneider - Aufsichtsratsvorsitzender Volker Kanitz
USt.Id DE211326547 Mail: netzing.ag(a)netzing.de
1:56 p.m.
Hi! Thank you for your response. That's was the error. Now it works
correctly.
2012/6/8 Ulrich Meckel <meckel(a)netzing.de>
**
Hi
Did you start osmo-nitb with the "-m" Option?
"-m --mncc-sock Disable built-in MNCC handler and offer socket"
Regards
Ulrich
On 08.06.2012 11:27, Arturo Rivas wrote:
Hi!
I've already start osmo-nitb and it's working correctly but still not
connect with mncc socket.
2012/6/5 Konrad Meier <meierk(a)informatik.uni-freiburg.de>
On 05.06.2012 17:41, Arturo Rivas wrote:
--
_______________________________________________________________________
Ulrich Meckel
Entwicklung Mail: Meckel(a)netzing.de
NETZING Solutions AG Tel.: 0351/41381 - 0
Fröbelstr. 57, 01159 Dresden Fax: 0351/41381 - 12
_______________________________________________________________________
Impressum:
NETZING Solutions AG - Fröbelstraße 57 - 01159 Dresden
Sitz der Gesellschaft Amtsgericht Dresden HRB 18926
Vorstand Dieter Schneider - Aufsichtsratsvorsitzender Volker Kanitz
USt.Id DE211326547 Mail: netzing.ag(a)netzing.de
Hi!
All programs was compiled correctly buy when I try to execute lcr:
/rivas@pfc:~$ sudo /opt/lcr/sbin/lcr start/
/
/
/** LCR Version 1.10/
/
/
/000000 DEBUG (in getrulesetbyname() line 1871): ruleset main found./
/000000 DEBUG (in mISDNloop_open() line 36): Open external interface of
loopback./
/000000 DEBUG (in mISDNport_open() line 2388): Port has 30 b-channels./
/000000 DEBUG (in mISDNport_open() line 2409): using 'mISDN_dsp.o'
module/
/000000 TRACE 05.06.12 17:36:19.305 CH: PORT (open) port 1 mode network
channels 30/
/000000 ERROR (in mncc_socket_retry_cb() line 1102): Could not connect
to MNCC socket /tmp/bsc_mncc, retrying in 5 seconds/
/LCR 1.10 started, waiting for calls.../
/000000 TRACE 05.06.12 17:36:19.326 --: LCR 1.10 started, waiting for
calls.../
/000000 TRACE 05.06.12 17:36:20.480 --: REMOTE APP registers app
name=asterisk/
/000000 ERROR (in mncc_socket_retry_cb() line 1102): Could not connect
to MNCC socket /tmp/bsc_mncc, retrying in 5 seconds/
This output looks ok. You have to start the BSC software "osmo-nitb".
The BSC is no longer integrated into LCR.
Regards
Konrad
4362
days inactive
4376
days old
14 comments
4 participants
participants (4)
-
Arturo Rivas -
Konrad Meier -
Rogier van Eeten -
Ulrich Meckel