14 May
2009
14 May
'09
8:41 p.m.
Hello Nordin,
On Thu, 14 May 2009 17:26:22 +0200, "Nordin" <bouchtaoui(a)gmail.com>
wrote:
Than I executed the bsc_hack for the nanoBTS (thus I give the
appropriate parameters as described on the webpage), and I get the
following error:
DB: Database initialized.
DB: Database prepared.
mi_setup could not open socket Address family not supported by protocol
Do you really provide the correct parameters to bsc_hack ? The
current version of bsc_hack requires the parameter "-t nanobts900"
or "-t nanobts1800", depending on the type of the nanoBTS you have.
If you don't specify the type, the BS-11 is used.
Additionally be sure to specify the ARFCN for a nanoBTS 1800 because
otherwise the default GSM900 channel 123 will be used which does not
work for DCS1800.
Best regards,
Dieter
--
Dieter Spaar, Germany spaar(a)mirider.augusta.de
15 May
15 May
12:09 p.m.
New subject: Problem with installing OpenBSC on Centos 4
Hi Dieter,
You are right about the arfcn number, I modified to 880, and now it is
working!
I can detect the network on my mobilephone!
Thank you very much!
Dieter Spaar schreef:
Hello Nordin,
On Thu, 14 May 2009 17:26:22 +0200, "Nordin" <bouchtaoui(a)gmail.com>
wrote:
Than I executed the bsc_hack for the nanoBTS
(thus I give the
appropriate parameters as described on the webpage), and I get the
following error:
DB: Database initialized.
DB: Database prepared.
mi_setup could not open socket Address family not supported by protocol
Do you really provide the correct parameters to bsc_hack ? The
current version of bsc_hack requires the parameter "-t nanobts900"
or "-t nanobts1800", depending on the type of the nanoBTS you have.
If you don't specify the type, the BS-11 is used.
Additionally be sure to specify the ARFCN for a nanoBTS 1800 because
otherwise the default GSM900 channel 123 will be used which does not
work for DCS1800.
Best regards,
Dieter
5481
days inactive
5482
days old
1 comments
2 participants
participants (2)
-
Dieter Spaar -
Nordin