With the newest git repo version of osmo-bsc, my nanoBTS fails to start.
I can confirm that they work normally with ip.access softBSC.
I thought osmocom Redmine issue #3063 might be relevant and tried
setting/unsetting force-combined-si but I am still getting the same
result. Attached are the packet capture and bsc config file
The following is the log from osmo-bsc:
<0015> input/ipa.c:262 accept()ed new link from 192.168.27.40 to port 3002
<0004> abis_nm.c:847 OC=BTS(01) INST=(ff,ff,ff): GET ATTRIBUTE NACK
<0004> osmo_bsc_main.c:178 BTS0 does not support Get Attributes OML message.
<0004> abis_nm.c:560 OC=BASEBAND-TRANSCEIVER(04) INST=(00,00,ff): BTS0:
ARI reported sw[0/5]: 168a004 is v136d0
<0004> abis_nm.c:560 OC=BASEBAND-TRANSCEIVER(04) INST=(00,00,ff): BTS0:
ARI reported sw[1/5]: 168a002 is v136d0
<0004> abis_nm.c:560 OC=BASEBAND-TRANSCEIVER(04) INST=(00,00,ff): BTS0:
ARI reported sw[2/5]: 168a002 is v136d0
<0004> abis_nm.c:560 OC=BASEBAND-TRANSCEIVER(04) INST=(00,00,ff): BTS0:
ARI reported sw[3/5]: 168a001 is v136d0
<0004> abis_nm.c:560 OC=BASEBAND-TRANSCEIVER(04) INST=(00,00,ff): BTS0:
ARI reported sw[4/5]: 168a001 is v136d0
<0004> abis_nm.c:494 BTS0 Attribute Manufacturer Dependent State is
unreported
<0004> abis_nm.c:2888 (bts=0,trx=0) IPA RSL CONNECT IP=0.0.0.0 PORT=3003
STREAM=0x00
<0015> input/ipa.c:262 accept()ed new link from 192.168.27.40 to port 3003
<0003> osmo_bsc_main.c:283 bootstrapping RSL for BTS/TRX (0/0) on ARFCN
600 using MCC-MNC 450-09 LAC=23 CID=0 BSIC=63
BTS 0: Failure Event Report: Type=processing failure, Severity=critical
failure, Probable cause=Manufacturer specific values: Fatal software
error, Additional Text=l2_bch.c:1149
****
** l2_bch.c#1149:BCHbcchSItypeValid( prim_p->infoType )
** IPA_SW_FATAL_ERROR
** In task "TRX Proc:L2_BCH" @ (325).
****
.
BTS 0: Failure Event Report: Type=processing failure, Severity=critical
failure, Probable cause=Manufacturer specific values: Fatal software
error, Additional Text=TRX Proc:L2_BCH:l2_bch.c#1149 (325).
BTS 0: Failure Event Report: Type=processing failure, Severity=warning
level failure, Probable cause=Manufacturer specific values: Software
warning, Additional
Text=31782:WARN:OAM_RES:trx_fatal_error_log.c#255:TRX has logged the error:
.
BTS 0: Failure Event Report: Type=processing failure, Severity=warning
level failure, Probable cause=Manufacturer specific values: Software
warning, Additional
Text=31782:WARN:OAM_RES:trx_fatal_error_log.c#256:TRX
Proc:L2_BCH:l2_bch.c#1149 (325)