9 Nov
2009
9 Nov
'09
11:50 a.m.
Hello guys,
If I run the latest version of openbsc and tried to register with my MS
(Nokia 6310) to it, my phone finally says No Access.
I see sending Channel Release several time in the debugging output. I
also see increase/decrease usage several time. It has been a while not
looking at the meaning of debug messages. I just use the standard config
file for nanobts and changed a few parameters like unit_id, band, mcc
and mnc, that's all. I noticed that I can't add an accept parameter,
like before. Also in the config file I can't find anything like that, am
I missing something?
kind regards,
nordin.
9 Nov
9 Nov
12:19 p.m.
Hi,
If I run the latest version of openbsc and tried to
register with my MS
(Nokia 6310) to it, my phone finally says No Access.
Because the IMSI is probably not an authorized one.
I see sending Channel Release several time in the
debugging output. I
also see increase/decrease usage several time. It has been a while not
looking at the meaning of debug messages.
Yes, I've seen multiple RF release too. I think there is a bug somewhere
but didn't search yet.
I just use the standard config file for nanobts and
changed a few
parameters like unit_id, band, mcc and mnc, that's all. I noticed that I
can't add an accept parameter, like before. Also in the config file I
can't find anything like that, am I missing something?
The equivalent config parameter is "auth policy". The defaut nano bts
config file uses "auth policy closed" so all unauthorized phones will be
rejected. You need t use "auth policy accept-all" if you want to authorized
everyone without any check.
Sylvain
12:40 p.m.
Thank you for your response,
246tnt(a)gmail.com schreef:
I don't want to bother you with silly questions, but I just can't find
something about policy in the config-file examples, see link.
http://repo.or.cz/w/openbsc.git/blob_plain/HEAD:/openbsc/src/openbsc.cfg.na…
Hi,
Uhhh, where can I authorize it?
If I run the latest version of openbsc and tried
to register with my
MS (Nokia 6310) to it, my phone finally says No Access.
Because the IMSI is probably not an authorized one. I just use the
standard config file for nanobts and changed a few
parameters like unit_id, band, mcc and mnc, that's all. I noticed
that I can't add an accept parameter, like before. Also in the config
file I can't find anything like that, am I missing something?
The equivalent config parameter is "auth policy". The defaut nano bts
config file uses "auth policy closed" so all unauthorized phones will
be rejected. You need t use "auth policy accept-all" if you want to
authorized everyone without any check.
12:43 p.m.
Hi,
maybe your SIM is rejecting the loc update (my old D2 cards do).
Best Regards
Björn Heller
Am 09.11.2009 um 11:50 schrieb Nordin <bouchtaoui(a)gmail.com>om>:
Hello guys,
If I run the latest version of openbsc and tried to register with my
MS (Nokia 6310) to it, my phone finally says No Access.
I see sending Channel Release several time in the debugging output.
I also see increase/decrease usage several time. It has been a while
not looking at the meaning of debug messages. I just use the
standard config file for nanobts and changed a few parameters like
unit_id, band, mcc and mnc, that's all. I noticed that I can't add
an accept parameter, like before. Also in the config file I can't
find anything like that, am I missing something?
kind regards,
nordin.
12:45 p.m.
Try to telnet to localhost 4242
then
enable
configure terminal
network
auth policy accept-all
Best Regards
Björn Heller
Am 09.11.2009 um 12:40 schrieb Nordin <bouchtaoui(a)gmail.com>om>:
Thank you for your response,
246tnt(a)gmail.com schreef:
I don't want to bother you with silly questions, but I just can't
find something about policy in the config-file examples, see link.
http://repo.or.cz/w/openbsc.git/blob_plain/HEAD:/openbsc/src/openbsc.cfg.na…
Hi,
Uhhh, where can I authorize it?
If I run the latest version of openbsc and tried
to register with
my MS (Nokia 6310) to it, my phone finally says No Access.
Because the IMSI is probably not an authorized one. I just
use the standard config file for nanobts and changed a few
parameters like unit_id, band, mcc and mnc, that's all. I noticed
that I can't add an accept parameter, like before. Also in the
config file I can't find anything like that, am I missing something?
The equivalent config parameter is "auth policy". The defaut nano
bts config file uses "auth policy closed" so all unauthorized
phones will be rejected. You need t use "auth policy accept-all" if
you want to authorized everyone without any check.
1:50 p.m.
Thanks for your responses guys,
It was my mistake I wrote "auth_policy" instead of "auth policy"
Bjoern Heller schreef:
Try to telnet to localhost 4242
then
enable
configure terminal
network
auth policy accept-all
Best Regards
Björn Heller
Am 09.11.2009 um 12:40 schrieb Nordin <bouchtaoui(a)gmail.com>om>:
Thank you for your response,
246tnt(a)gmail.com schreef:
I don't want to bother you with silly questions, but I just can't
find something about policy in the config-file examples, see link.
http://repo.or.cz/w/openbsc.git/blob_plain/HEAD:/openbsc/src/openbsc.cfg.na…
Hi,
Uhhh, where can I authorize it?
If I run the latest version of openbsc and tried
to register with
my MS (Nokia 6310) to it, my phone finally says No Access.
Because the IMSI is probably not an authorized one. I just
use the standard config file for nanobts and changed a few
parameters like unit_id, band, mcc and mnc, that's all. I noticed
that I can't add an accept parameter, like before. Also in the
config file I can't find anything like that, am I missing something?
The equivalent config parameter is "auth policy". The defaut nano
bts config file uses "auth policy closed" so all unauthorized phones
will be rejected. You need t use "auth policy accept-all" if you
want to authorized everyone without any check.
5305
days inactive
5305
days old
5 comments
3 participants
participants (3)
-
246tnt＠gmail.com -
Bjoern Heller -
Nordin