9 May
2019
9 May
'19
11:44 a.m.
Hello.
I just followed the step by step procedure outlined in the wiki to compile
OpenBSC on Ubuntu 16.04 LTS for the ip.access nanoBTS. My problem is that
the folder ipaccess which has the ipaccess.config is missing and so is the
abisip-find file.
Any leads on why this is happening? I had seen somewhere that the above can
be found in the osmocom-ipaccess-utils from the repo but that too is
unavailable.
Many thanks
-tyrus
9 May
9 May
4:15 p.m.
Hi,
ipaccess related binaries have been removed from openbsc.git in
07bcda7554a981cb23af9eb4ea9f5e23573580c6, and have been actually
maintained (and deb packages generated) in osmo-bsc.git. You definetly
want to build them from there. Please point us to related docs if they
are outdated.
--
- Pau Espin Pedrol <pespin(a)sysmocom.de> http://www.sysmocom.de/
=======================================================================
* sysmocom - systems for mobile communications GmbH
* Alt-Moabit 93
* 10559 Berlin, Germany
* Sitz / Registered office: Berlin, HRB 134158 B
* Geschaeftsfuehrer / Managing Director: Harald Welte
9:37 p.m.
Hi Ty,
aside from Pau's comment, I'm wondering why you aren't using the binary
packages
we provide. I of course understand there's tons of reasons why you would want
to build code from source (trust, security, ...) but then typically if you build
from source, then
Please also note that OpenBSC/OsmoNITB from openbsc.git is discontinued since 2017.
Please use new "CNI" stack with software from osmo-bsc.git, osmo-msc.git,
osmo-hlr.git, etc.
--
- Harald Welte <laforge(a)gnumonks.org> http://laforge.gnumonks.org/
============================================================================
"Privacy in residential applications is a desirable marketing option."
(ETSI EN 300 175-7 Ch. A6)
10 May
10 May
10:20 a.m.
Thanks for the revert Pau. Then the Wiki is outdated
https://osmocom.org/projects/openbsc/wiki/Building_OpenBSC
Thank you Harald.
Managed to find the .debs and installed them successfully. Problem is
the abisip-find doesn't find the nanoBTS which is clearly powered on. Any
insight into this.
In addition, I'm getting this symbol error when I run osmo-nitb
tyrus@the-jedi-council:~/openbsc/openbsc/src/osmo-nitb$ ./osmo-nitb
.*/osmo-nitb: /usr/lib/i386-linux-gnu/libosmoctrl.so.0: no version
information available (required by ./osmo-nitb)*
*./osmo-nitb: relocation error: ./osmo-nitb: symbol ctrl_vty_init, version
LIBOSMOCTRL_1.0 not defined in file libosmoctrl.so.0 with link time
reference*
Any idea what could be broken? I have an idea it's a linker issue but not
too sure how to troubleshoot this.
Also was nice attending your talk when you were last in Nairobi. Good work.
Many thanks
On Thu, May 9, 2019 at 10:40 PM Harald Welte <laforge(a)gnumonks.org> wrote:
Hi Ty,
aside from Pau's comment, I'm wondering why you aren't using the binary
packages
we provide. I of course understand there's tons of reasons why you would
want
to build code from source (trust, security, ...) but then typically if you
build
from source, then
Please also note that OpenBSC/OsmoNITB from openbsc.git is discontinued
since 2017.
Please use new "CNI" stack with software from osmo-bsc.git, osmo-msc.git,
osmo-hlr.git, etc.
--
- Harald Welte <laforge(a)gnumonks.org>
http://laforge.gnumonks.org/
============================================================================
"Privacy in residential applications is a desirable marketing option."
(ETSI EN 300 175-7 Ch.
A6)
13 May
13 May
11:30 a.m.
Hi.
On 5/10/19 10:20 AM, ty wrote:
tyrus@the-jedi-council:~/openbsc/openbsc/src/osmo-nitb$ ./osmo-nitb
.*/osmo-nitb: /usr/lib/i386-linux-gnu/libosmoctrl.so.0: no version
information available (required by ./osmo-nitb)*
*./osmo-nitb: relocation error: ./osmo-nitb: symbol ctrl_vty_init,
version LIBOSMOCTRL_1.0 not defined in file libosmoctrl.so.0 with link
time reference*
*
*
You say you installed programs from .deb but you are still running the
version of osmo-nitb from your compiled version. Use the one from
packages to avoid this kind of issues, otherwise the version you built
and the ones from the .deb packages won't much unless you really know
what you are doing.
--
- Pau Espin Pedrol <pespin(a)sysmocom.de> http://www.sysmocom.de/
=======================================================================
* sysmocom - systems for mobile communications GmbH
* Alt-Moabit 93
* 10559 Berlin, Germany
* Sitz / Registered office: Berlin, HRB 134158 B
* Geschaeftsfuehrer / Managing Director: Harald Welte
2:31 p.m.
Hi Pau
Once again I truly appreciate your revert. You're right. I managed to pull
the osmoBsc and compiled it together with the dependencies.
Every thing works fine until I ran 'make' which throws this struct error
In file included from gsm_04_80_utils.c:22:0:
/usr/local/include/osmocom/gsm/gsm0480.h:120:14: note: declared here
struct msgb *gsm0480_create_ussd_release_complete(void)
^
CC gsm_data.o
CC handover_cfg.o
CC handover_decision.o
CC handover_decision_2.o
CC handover_fsm.o
CC handover_logic.o
CC handover_vty.o
CC lchan_fsm.o
CC lchan_rtp_fsm.o
lchan_rtp_fsm.c: In function ‘mgcp_pick_codec’:
lchan_rtp_fsm.c:841:12: error: ‘struct mgcp_conn_peer’ has no member named
‘param_present’
verb_info->param_present = true;
^
lchan_rtp_fsm.c:842:12: error: ‘struct mgcp_conn_peer’ has no member named
‘param’
verb_info->param.amr_octet_aligned_present = true;
^
lchan_rtp_fsm.c:851:12: error: ‘struct mgcp_conn_peer’ has no member named
‘param’
verb_info->param.amr_octet_aligned = true;
^
lchan_rtp_fsm.c:854:12: error: ‘struct mgcp_conn_peer’ has no member named
‘param’
verb_info->param.amr_octet_aligned =
lchan->conn->sccp.msc->amr_octet_aligned;
^
Makefile:616: recipe for target 'lchan_rtp_fsm.o' failed
make[3]: *** [lchan_rtp_fsm.o] Error 1
make[3]: Leaving directory '/home/tyrus/osmo-bsc/src/osmo-bsc'
Makefile:405: recipe for target 'all-recursive' failed
make[2]: *** [all-recursive] Error 1
make[2]: Leaving directory '/home/tyrus/osmo-bsc/src'
Makefile:448: recipe for target 'all-recursive' failed
make[1]: *** [all-recursive] Error 1
make[1]: Leaving directory '/home/tyrus/osmo-bsc'
Makefile:380: recipe for target 'all' failed
make: *** [all] Error 2
So I have tried all weekend to debug it but unfortunately haven't made much
headway. Any leads?
Many thanks
On Mon, May 13, 2019 at 12:30 PM Pau Espin Pedrol <pespin(a)sysmocom.de>
wrote:
Hi.
On 5/10/19 10:20 AM, ty wrote:
tyrus@the-jedi-council:~/openbsc/openbsc/src/osmo-nitb$ ./osmo-nitb
.*/osmo-nitb: /usr/lib/i386-linux-gnu/libosmoctrl.so.0: no version
information available (required by ./osmo-nitb)*
*./osmo-nitb: relocation error: ./osmo-nitb: symbol ctrl_vty_init,
version LIBOSMOCTRL_1.0 not defined in file libosmoctrl.so.0 with link
time reference*
*
*
You say you installed programs from .deb but you are still running the
version of osmo-nitb from your compiled version. Use the one from
packages to avoid this kind of issues, otherwise the version you built
and the ones from the .deb packages won't much unless you really know
what you are doing.
--
- Pau Espin Pedrol <pespin(a)sysmocom.de> http://www.sysmocom.de/
=======================================================================
* sysmocom - systems for mobile communications GmbH
* Alt-Moabit 93
* 10559 Berlin, Germany
* Sitz / Registered office: Berlin, HRB 134158 B
* Geschaeftsfuehrer / Managing Director: Harald Welte
7:28 p.m.
Hi Ty,
On 13/05/2019 15.31, ty wrote:
In file included from gsm_04_80_utils.c:22:0:
/usr/local/include/osmocom/gsm/gsm0480.h:120:14: note: declared here
struct msgb *gsm0480_create_ussd_release_complete(void)
^
Most probably this is a deprecation warning that you could ignore.
CC lchan_rtp_fsm.o
lchan_rtp_fsm.c: In function ‘mgcp_pick_codec’:
lchan_rtp_fsm.c:841:12: error: ‘struct mgcp_conn_peer’ has no member
named ‘param_present’
verb_info->param_present = true;
^
lchan_rtp_fsm.c:842:12: error: ‘struct mgcp_conn_peer’ has no member
named ‘param’
verb_info->param.amr_octet_aligned_present = true;
^
lchan_rtp_fsm.c:851:12: error: ‘struct mgcp_conn_peer’ has no member
named ‘param’
verb_info->param.amr_octet_aligned = true;
^
lchan_rtp_fsm.c:854:12: error: ‘struct mgcp_conn_peer’ has no member
named ‘param’
verb_info->param.amr_octet_aligned =
lchan->conn->sccp.msc->amr_octet_aligned;
^
Makefile:616: recipe for target 'lchan_rtp_fsm.o' failed
make[3]: *** [lchan_rtp_fsm.o] Error 1
make[3]: Leaving directory '/home/tyrus/osmo-bsc/src/osmo-bsc'
Install the latest version of osmo-mgw from its maser branch and try
again. These two members were added in commit 228e59158 and it seems
you have installed an older version.
Regards,
Vasil
27 Jun
27 Jun
9:55 p.m.
Hey all. Just bumping this since I haven’t heard any revert
Thanks
On Mon, 13 May 2019 at 15:31, ty <tyruskam(a)gmail.com> wrote:
Hi Pau
Once again I truly appreciate your revert. You're right. I managed to pull
the osmoBsc and compiled it together with the dependencies.
Every thing works fine until I ran 'make' which throws this struct error
In file included from gsm_04_80_utils.c:22:0:
/usr/local/include/osmocom/gsm/gsm0480.h:120:14: note: declared here
struct msgb *gsm0480_create_ussd_release_complete(void)
^
CC gsm_data.o
CC handover_cfg.o
CC handover_decision.o
CC handover_decision_2.o
CC handover_fsm.o
CC handover_logic.o
CC handover_vty.o
CC lchan_fsm.o
CC lchan_rtp_fsm.o
lchan_rtp_fsm.c: In function ‘mgcp_pick_codec’:
lchan_rtp_fsm.c:841:12: error: ‘struct mgcp_conn_peer’ has no member named
‘param_present’
verb_info->param_present = true;
^
lchan_rtp_fsm.c:842:12: error: ‘struct mgcp_conn_peer’ has no member named
‘param’
verb_info->param.amr_octet_aligned_present = true;
^
lchan_rtp_fsm.c:851:12: error: ‘struct mgcp_conn_peer’ has no member named
‘param’
verb_info->param.amr_octet_aligned = true;
^
lchan_rtp_fsm.c:854:12: error: ‘struct mgcp_conn_peer’ has no member named
‘param’
verb_info->param.amr_octet_aligned =
lchan->conn->sccp.msc->amr_octet_aligned;
^
Makefile:616: recipe for target 'lchan_rtp_fsm.o' failed
make[3]: *** [lchan_rtp_fsm.o] Error 1
make[3]: Leaving directory '/home/tyrus/osmo-bsc/src/osmo-bsc'
Makefile:405: recipe for target 'all-recursive' failed
make[2]: *** [all-recursive] Error 1
make[2]: Leaving directory '/home/tyrus/osmo-bsc/src'
Makefile:448: recipe for target 'all-recursive' failed
make[1]: *** [all-recursive] Error 1
make[1]: Leaving directory '/home/tyrus/osmo-bsc'
Makefile:380: recipe for target 'all' failed
make: *** [all] Error 2
So I have tried all weekend to debug it but unfortunately haven't made
much headway. Any leads?
Many thanks
On Mon, May 13, 2019 at 12:30 PM Pau Espin Pedrol <pespin(a)sysmocom.de>
wrote:
Excuse my brevity, sent on the run.
Hi.
On 5/10/19 10:20 AM, ty wrote:
--
tyrus@the-jedi-council:~/openbsc/openbsc/src/osmo-nitb$ ./osmo-nitb
.*/osmo-nitb: /usr/lib/i386-linux-gnu/libosmoctrl.so.0: no version
information available (required by ./osmo-nitb)*
*./osmo-nitb: relocation error: ./osmo-nitb: symbol ctrl_vty_init,
version LIBOSMOCTRL_1.0 not defined in file libosmoctrl.so.0 with link
time reference*
*
*
You say you installed programs from .deb but you are still running the
version of osmo-nitb from your compiled version. Use the one from
packages to avoid this kind of issues, otherwise the version you built
and the ones from the .deb packages won't much unless you really know
what you are doing.
--
- Pau Espin Pedrol <pespin(a)sysmocom.de> http://www.sysmocom.de/
=======================================================================
* sysmocom - systems for mobile communications GmbH
* Alt-Moabit 93
* 10559 Berlin, Germany
* Sitz / Registered office: Berlin, HRB 134158 B
* Geschaeftsfuehrer / Managing Director: Harald Welte
28 Jun
28 Jun
10:32 a.m.
On 27/06/2019 21:55, ty wrote:
Hey all. Just bumping this since I haven’t heard any
revert
In fact there was a reply, via the mailing list, from Vasil who
explained the last hurdles you were facing.
http://lists.osmocom.org/pipermail/openbsc/2019-May/012932.html
IIUC, you seem to have a goal which is to test/run an ip.access nanoBTS,
however it seems you are getting bogged down in problems which are more
leading you in the direction of C development, possibly distracting from
your goal?
My suggestions are:
1) If at all possible, build a new VM or install a fresh OS and install
the osmo stack from packages.
https://osmocom.org/projects/cellular-infrastructure/wiki/Latest_Builds
If a fresh OS install is really not possible, then clean up your
existing work machine;
* run make uninstall for each component you installed from source.
* Even then, check for and remove and libosmo* (and maybe other lib*
and/or executables from osmo source) from where ever you installed from
source. This is probably /usr/local/lib
* Now install from packages.
2) Test your ip.access nanoBTS and deal with learning how to configure
all the parts of the osmo stack to have it work.
3) If you want, and now with the first hand knowledge of what a running
system looks like, return to the project of building from source. Be
aware that there is a lot of development and things often move quickly.
It does happen that you cannot clone one repo, and expect to compile
it's master branch against libraries you compiled yesterday. If you are
going to compile the entire stack, know that sometimes dependencies are
not in obvious places. but for now, How do you feel about cleaning up
your work machine and using the packages to get your hardware running?
1786
days inactive
1836
days old
8 comments
5 participants
participants (5)
-
Harald Welte -
Keith -
Pau Espin Pedrol -
ty -
Vasil Velichkov