16 Mar
2011
16 Mar
'11
11:56 p.m.
hello
do the oml and rsl settings have to be identical? for example: one bts is set to port 0,
ts 1, tei 25. the cfg entry would be "oml e1 line 0 timeslot 1 sub-slot full"
and "rsl e1 line 0 timeslot 1 sub-slot full", right?
T.
http://openbsc.osmocom.org/trac/wiki/bsc_hack_VTY#rsle1lineE1_LINEtimeslot1…
17 Mar
17 Mar
1:29 p.m.
On Wed, Mar 16, 2011 at 11:56:33PM +0100, kobayashi_maru(a)onlinehome.de wrote:
hello
do the oml and rsl settings have to be identical? for example: one bts is set
to port 0, ts 1, tei 25. the cfg entry would be "oml e1 line 0 timeslot 1
sub-slot full" and "rsl e1 line 0 timeslot 1 sub-slot full", right?
i don't think it is _required_ to run both on the same time-slot, but all you
would gain by separating them is to waste additional timeslots on A-bis.
I've never tested different TS for OML/RSL with the BS-11, though.
--
- Harald Welte <laforge(a)gnumonks.org> http://gnumonks.org/
============================================================================
We all know Linux is great...it does infinite loops in 5 seconds. -- Linus
4811
days inactive
4812
days old
1 comments
2 participants
participants (2)
-
Harald Welte -
kobayashi_maru＠onlinehome.de