7 Oct
2009
7 Oct
'09
8:22 p.m.
Hi folks.
I can't get my setup working. Everything works, the BS11 boots up well,
openBSC loads well. At the software side, everything looks perfect.
But the setup does not work. I have testet my BSC now with 3 different
BS11. One of the BS11 is brandnew (Has been set in standalone directly
after installing the firmware.)!
I found this and i think that this is an explaination of the problem:
http://lists.gnumonks.org/pipermail/openbsc/2009-August/000783.html
Finally my question is if anone of you ever observed a semilar effect.
regards.
Philipp
8 Oct
8 Oct
10:04 a.m.
Hi Dexter,
On Wed, Oct 07, 2009 at 08:22:00PM +0200, dexter wrote:
I can't get my setup working. Everything works,
the BS11 boots up
well, openBSC loads well. At the software side, everything looks
perfect.
But the setup does not work. I have testet my BSC now with 3
different BS11. One of the BS11 is brandnew (Has been set in
standalone directly after installing the firmware.)!
With what result? All three BS-11 do not work?
I found this and i think that this is an explaination
of the problem:
http://lists.gnumonks.org/pipermail/openbsc/2009-August/000783.html
Sergey, can you comment on this? What solved your propblem?
--
- Harald Welte <laforge(a)gnumonks.org> http://laforge.gnumonks.org/
============================================================================
"Privacy in residential applications is a desirable marketing option."
(ETSI EN 300 175-7 Ch. A6)
1:31 p.m.
Hmm, in my case the solution consisted of 3 steps:
1. Full BS-11 firmware re-flash.
2. Accurate calibration of internal oscillator.
3. Update of mISDN stack to the latest version.
On Oct 8, 2009, at 12:04 PM, Harald Welte wrote:
Hi Dexter,
On Wed, Oct 07, 2009 at 08:22:00PM +0200, dexter wrote:
I can't get my setup working. Everything
works, the BS11 boots up
well, openBSC loads well. At the software side, everything looks
perfect.
But the setup does not work. I have testet my BSC now with 3
different BS11. One of the BS11 is brandnew (Has been set in
standalone directly after installing the firmware.)!
With what result? All three BS-11 do not work?
I found this and i think that this is an
explaination of the problem:
http://lists.gnumonks.org/pipermail/openbsc/2009-August/000783.html
Sergey, can you comment on this? What solved your propblem?
--
- Harald Welte <laforge(a)gnumonks.org> http://laforge.gnumonks.org/
=
=
=
=
=
=
======================================================================
"Privacy in residential applications is a desirable marketing option."
(ETSI EN 300 175-7
Ch. A6)
1:37 p.m.
Thats really the way to go! Works.
Had the same problem.
Best Regards
Björn Heller
Am 08.10.2009 um 13:31 schrieb "Sergey V. Efimoff" <risky(a)mail.ru>ru>:
Hmm, in my case the solution consisted of 3 steps:
1. Full BS-11 firmware re-flash.
2. Accurate calibration of internal oscillator.
3. Update of mISDN stack to the latest version.
On Oct 8, 2009, at 12:04 PM, Harald Welte wrote:
Hi Dexter,
On Wed, Oct 07, 2009 at 08:22:00PM +0200, dexter wrote:
I can't get my setup working. Everything
works, the BS11 boots up
well, openBSC loads well. At the software side, everything looks
perfect.
But the setup does not work. I have testet my BSC now with 3
different BS11. One of the BS11 is brandnew (Has been set in
standalone directly after installing the firmware.)!
With what result? All three BS-11 do not work?
I found this and i think that this is an
explaination of the
problem:
http://lists.gnumonks.org/pipermail/openbsc/2009-August/000783.html
Sergey, can you comment on this? What solved your propblem?
-- - Harald Welte <laforge(a)gnumonks.org> http://laforge.gnumonks.org/
=
=
=
=
=
=
===
===================================================================
"Privacy in residential applications is a desirable marketing
option."
(ETSI EN 300 175-7
Ch. A6)
2:05 p.m.
How can i reflash the firmware of the BS-11? Mine sometimes "scrambles"
the audio signal which seems to be a software bug in my BS-11?
Hmm, in my case the solution consisted of 3 steps:
1. Full BS-11 firmware re-flash.
2. Accurate calibration of internal oscillator.
3. Update of mISDN stack to the latest version.
4:47 p.m.
See http://openbsc.gnumonks.org/trac/wiki/bs11_config
Though have not seen any audio problems on BS-11.
On Oct 8, 2009, at 4:05 PM, Kai Münz wrote:
How can i reflash the firmware of the BS-11? Mine
sometimes
"scrambles"
the audio signal which seems to be a software bug in my BS-11?
Hmm, in my case the solution consisted of 3
steps:
1. Full BS-11 firmware re-flash.
2. Accurate calibration of internal oscillator.
3. Update of mISDN stack to the latest version.
5:24 p.m.
Actually I'm missing the firmware files. Could anyone give me a hint
where I can find them?
Regards,
Kai
Sergey V. Efimoff wrote:
See http://openbsc.gnumonks.org/trac/wiki/bs11_config
Though have not seen any audio problems on BS-11.
On Oct 8, 2009, at 4:05 PM, Kai Münz wrote:
> How can i reflash the firmware of the BS-11? Mine sometimes "scrambles"
> the audio signal which seems to be a software bug in my BS-11?
>
>> Hmm, in my case the solution consisted of 3 steps:
>>
>> 1. Full BS-11 firmware re-flash.
>> 2. Accurate calibration of internal oscillator.
>> 3. Update of mISDN stack to the latest version.
5:41 p.m.
On Thu, Oct 08, 2009 at 02:05:02PM +0200, Kai Münz wrote:
How can i reflash the firmware of the BS-11? Mine
sometimes "scrambles"
the audio signal which seems to be a software bug in my BS-11?
i doubt that it is the BTS, and even if it was, I doubt that it was some
erroneously flashed software...
maybe you can give a more detailed report when the problem occurs and in which
particular setup.
--
- Harald Welte <laforge(a)gnumonks.org> http://laforge.gnumonks.org/
============================================================================
"Privacy in residential applications is a desirable marketing option."
(ETSI EN 300 175-7 Ch. A6)
9 Oct
9 Oct
11:10 a.m.
Hi Folks.
Thank you for your replies. Now I know I am not alone with that Problem.
I will build a vanilla 2.6.31 - that should contain the latest mISDN
drivers.
I hope that will fix it.
From one BS11 i definitly know that it is out of sync. This problem
will be
fixed with a rubidium frequency source soon. (I will write down a howto
when i done it successfull).
I will keep you posted.
regards.
Philipp
4:46 p.m.
Hi to all.
I successfully installed 2.6.31 and the problem seems to be solved. I
left a note in at Troublesooting [1] in the Wiki.
[1] http://bs11-abis.gnumonks.org/trac/wiki/BS11_Troubleshooting
Thank you very much!
regards.
Philipp
26 Nov
26 Nov
12:18 a.m.
Gents, I too could do with a hint as to where I could locate the
appropriate bs-11 firmware files. Any and all help appreciated.
-Paul
Kai Münz wrote:
Actually I'm missing the firmware files. Could
anyone give me a hint
where I can find them?
Regards,
Kai
Sergey V. Efimoff wrote:
See
http://openbsc.gnumonks.org/trac/wiki/bs11_config
Though have not seen any audio problems on BS-11.
On Oct 8, 2009, at 4:05 PM, Kai Münz wrote:
> How can i reflash the firmware of the BS-11? Mine sometimes "scrambles"
> the audio signal which seems to be a software bug in my BS-11?
>
>> Hmm, in my case the solution consisted of 3 steps:
>>
>> 1. Full BS-11 firmware re-flash.
>> 2. Accurate calibration of internal oscillator.
>> 3. Update of mISDN stack to the latest version.
5334
days inactive
5336
days old
10 comments
7 participants
participants (7)
-
Bjoern Heller -
dexter -
Harald Welte -
Kai Münz -
Philipp Fabian Benedikt Maier -
s4dd＠losers.yore.ma -
Sergey V. Efimoff