8 Apr
2019
8 Apr
'19
3:35 p.m.
Hello
I am trying to use openbsc with usrp x310. I have configured and executed osmo-trx from(
https://github.com/osmocom/osmo-trx) and osmo-bts(https://github.com/osmocom/osmo-bts) and
I can see the network on my phone but can't register to it, though I have set auth
policy to accept-all. I have attached attached my config files for reference.
BR
Snehasish
9 Apr
9 Apr
11:20 a.m.
Hi,
which hardware are you using under osmo-trx?
--
- Pau Espin Pedrol <pespin(a)sysmocom.de> http://www.sysmocom.de/
=======================================================================
* sysmocom - systems for mobile communications GmbH
* Alt-Moabit 93
* 10559 Berlin, Germany
* Sitz / Registered office: Berlin, HRB 134158 B
* Geschaeftsfuehrer / Managing Director: Harald Welte
11:25 a.m.
Ah sorry, I read to fast, usrp x310 :)
I never used that one personally.
--
- Pau Espin Pedrol <pespin(a)sysmocom.de> http://www.sysmocom.de/
=======================================================================
* sysmocom - systems for mobile communications GmbH
* Alt-Moabit 93
* 10559 Berlin, Germany
* Sitz / Registered office: Berlin, HRB 134158 B
* Geschaeftsfuehrer / Managing Director: Harald Welte
1:35 p.m.
Hi Snehasish,
On Mon, Apr 08, 2019 at 01:35:43PM +0000, Snehasish Kar wrote:
I am trying to use openbsc with usrp x310. I have
configured and executed osmo-trx from( https://github.com/osmocom/osmo-trx) and
osmo-bts(https://github.com/osmocom/osmo-bts) and I can see the network on my phone but
can't register to it, though I have set auth policy to accept-all. I have attached
attached my config files for reference.
it would be quite useful if you could generate pcap files of the relevant interfaces,
.e.g. in particular the Abis RSL (tcp port 3003) interface.
Please also note you appear to be using openbsc (OsmoNITB) which is no longer supported
for about two years now. Nevertheless, at least network registration should for sure
work.
Regards,
Harald
--
- Harald Welte <laforge(a)gnumonks.org> http://laforge.gnumonks.org/
============================================================================
"Privacy in residential applications is a desirable marketing option."
(ETSI EN 300 175-7 Ch. A6)
3 p.m.
Hello Harald
Thanks for your Response!!!
Since there was clipping happening on Osmo-trx, I was not able to connect. Changing the
gain helped.
Regards
________________________________
From: Harald Welte <laforge(a)gnumonks.org>
Sent: Tuesday, April 9, 2019 5:05 PM
To: Snehasish Kar
Cc: openbsc(a)lists.osmocom.org
Subject: Re: Phones not registering on network
Hi Snehasish,
On Mon, Apr 08, 2019 at 01:35:43PM +0000, Snehasish Kar wrote:
I am trying to use openbsc with usrp x310. I have
configured and executed osmo-trx from( https://github.com/osmocom/osmo-trx) and
osmo-bts(https://github.com/osmocom/osmo-bts) and I can see the network on my phone but
can't register to it, though I have set auth policy to accept-all. I have attached
attached my config files for reference.
it would be quite useful if you could generate pcap files of the relevant interfaces,
.e.g. in particular the Abis RSL (tcp port 3003) interface.
Please also note you appear to be using openbsc (OsmoNITB) which is no longer supported
for about two years now. Nevertheless, at least network registration should for sure
work.
Regards,
Harald
--
- Harald Welte <laforge(a)gnumonks.org> http://laforge.gnumonks.org/
============================================================================
"Privacy in residential applications is a desirable marketing option."
(ETSI EN 300 175-7 Ch. A6)
11:32 p.m.
On 08/04/2019 15:35, Snehasish Kar wrote:
Hello
I am trying to use openbsc with usrp x310. I have configured and
executed osmo-trx from( https://github.com/osmocom/osmo-trx
<https://github.com/osmocom/osmo-trx>) and
osmo-bts(https://github.com/osmocom/osmo-bts) and I can see the
network on my phone but can't register to it,
this is very typical behaviour with other Ettus SDR that I have used
when the clock is not accurate.
do you have the optional internal GPSDO with your x310?
If you have the GPSDO, make sure it is locked.
If you do not, you may not be able to have a very satisfactory
experience unless you can find another stable clock source.
What models of phone have you tried? I found some did not care so much
about the clock.
If no GPSDO, then try putting the phone into manual selection mode, then
power cycle close to your Ettus x310 so the phone sees a string signal
from it.
Quickly manually search for networks and select your network. Watch the
osmo-bts (telnet to port 4241) log output (can't remember which log
level right now, but even log level all debug should be ok) for any sign
of comms from your phone.
1869
days inactive
1870
days old
5 comments
5 participants
participants (5)
-
Harald Welte -
Keith -
Pau Espin Pedrol -
Snehasish Kar -
Snehasish Kar