Hi Farah, What SIM card reader are you using? What does the command lsusb say? Also check dmesg and syslog for more information. It is almost sure that your reader’s driver is not yet or already included in pcsc, so you will need peobably change pcsc version to an older or newer release. Kind regards, Domi 2018. jún. 13. dátummal, 1:22 időpontban Ferdaus, Farah <ff1016(a)wildcats.unh.edu> írta:

Dear Domi, Thank you for your kind reply and suggestions. Now I am using this Insten_USB_SIM_Card_Writer<https://urldefense.proofpoint.com/v2/url?u=ht… one, but I am pretty sure this SIM card reader is not working. I think it will be good to buy a new card reader; I am taking necessary steps to buy the new SIM card reader. I hope everything will be fine. However, here is the output of lsusb command without the Card reader. wslopenbts@wslopenbts-desktop:~$ lsusb Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 003: ID 058f:6362 Alcor Micro Corp. Flash Card Reader/Writer Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub and with the Card reader. wslopenbts@wslopenbts-desktop:~$ lsusb Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 003: ID 058f:6362 Alcor Micro Corp. Flash Card Reader/Writer Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 003 Device 002: ID 067b:2303 Prolific Technology, Inc. PL2303 Serial Port Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub It seems syslog command is not working in my system. Here is the output. wslopenbts@wslopenbts-desktop:~$ syslog No command 'syslog' found, did you mean: Command 'syslogd' from package 'busybox-syslogd' (universe) Command 'syslogd' from package 'inetutils-syslogd' (universe) Command 'dsyslog' from package 'dsyslog' (universe) syslog: command not found Thank you. Best Regards, Farah ________________________________ From: Tomcsányi, Domonkos &lt;domi(a)tomcsanyi.net&gt; Sent: Wednesday, June 13, 2018 12:25:47 AM To: Ferdaus, Farah Cc: openbsc(a)lists.osmocom.org Subject: Re: Regarding Programming SIM cards Hi Farah, What SIM card reader are you using? What does the command lsusb say? Also check dmesg and syslog for more information. It is almost sure that your reader’s driver is not yet or already included in pcsc, so you will need peobably change pcsc version to an older or newer release. Kind regards, Domi 2018. jún. 13. dátummal, 1:22 időpontban Ferdaus, Farah <ff1016@wildcats.unh.edu<mailto:ff1016@wildcats.unh.edu>> írta: Hi there, I have built and installed the requirements for OpenBTS and my USRP (Ettus N210) is responding but now I am stuck at SIM card stage. I am trying to program a Super SIM 16-in-1 using the Insten_USB_SIM_Card_Writer<https://urldefense.proofpoint.com/v2/url?u=ht… and following the steps mentioned here<https://urldefense.proofpoint.com/v2/url?u=http-3A__openbts.org_w_i… and here<https://urldefense.proofpoint.com/v2/url?u=http-3A__osmocom.org_pro… but unable to write the sim card. Every time I run the pcsc_scan command it stops working. Below is the output. "wslopenbts@wslopenbts-desktop:~$ pcsc_scan PC/SC device scanner V 1.4.25 (c) 2001-2011, Ludovic Rousseau <ludovic.rousseau@free.fr<mailto:ludovic.rousseau@free.fr>> Compiled with PC/SC lite version: 1.8.14 Using reader plug'n play mechanism Scanning present readers... Waiting for the first reader...^C" The problem seems that the PC is not getting the SIM card reader. But the SIM card reader was plugged into the PC while running the command and the LED turned red which indicate it was getting the power from the PC. Do you think, buying another new SIM card reader can resolve the issue? I can test by buying another SIM and SIM card reader; Do any of you have any suggestion for the SIM and SIM card reader, particularly which one will be good? Finally, any guideline for me regarding programming the SIM card. I will be very grateful if you help me by giving suggestions to resolve my issue. Can anyone please help me regarding this issue. Thanks in advance Best Regards, Farah