requesting working demo config files for 2g setup osmomsc, osmobsc, osmostp,osmohlr, osmomgw
18 May
2018
18 May
'18
2:45 p.m.
Dear All,
I was wondering whether anyone could please provide me a set of fully
working configuration files for a network-in-the-box setup with msc,
bsc, stp, hlr, mgw parts (not osmo-nitb). I have successfully compiled
all the required software from source, however, the migration guide is
incomplete and I cannot seem to find a simple tutorial for building an
osmo network from scratch using all the new components. I want to set up
a 2g network for calls/sms, i don't need gprs though.
Thanks!
Sincerely,
Toby M.
18 May
18 May
5:28 p.m.
Hi Toby,
find attached my set of config files I use almost daily.
It assumes your PC (Core Network) ip addr is 192.168.30.1, and the
address of the BTS is 192.168.30.100.
Take into account I'm running only 1 osmo-mgw and I make both osmo-msc
and osmo-bsc connect to that one, in order to get rid of one more extra
process.
These are the commands I use to run the components:
ggsn="sudo LD_LIBRARY_PATH=$mylibdir gdb -ex run --args
$mybindir/osmo-ggsn -c $myconfdir/osmo-ggsn.cfg"
sgsn="gdb -ex run --args $mybindir/osmo-sgsn -c $myconfdir/osmo-sgsn.cfg"
msc="gdb -ex run --args $mybindir/osmo-msc -c $myconfdir/osmo-msc.cfg"
hlr="gdb -ex run --args $mybindir/osmo-hlr -c $myconfdir/osmo-hlr.cfg
--database $myconfdir/hlr.db"
stp="gdb -ex run --args $mybindir/osmo-stp -c $myconfdir/osmo-stp.cfg"
bsc="gdb -ex run --arg $mybindir/osmo-bsc -c $myconfdir/osmo-bsc.cfg -s"
mgcp="gdb -ex run --arg $mybindir/osmo-bsc_mgcp -c
$myconfdir/osmo-bsc-mgcp.cfg"
mgw="gdb -ex run --arg $mybindir/osmo-mgw -c $myconfdir/osmo-mgw.cfg"
bts_trx="gdb -ex run --args $mybindir/osmo-bts-trx -c
$myconfdir/osmo-bts-trx.cfg -i 127.0.0.1 -r 1"
pcu="$mybindir/osmo-pcu -c $myconfdir/osmo-pcu.cfg"
--
- Pau Espin Pedrol <pespin(a)sysmocom.de> http://www.sysmocom.de/
=======================================================================
* sysmocom - systems for mobile communications GmbH
* Alt-Moabit 93
* 10559 Berlin, Germany
* Sitz / Registered office: Berlin, HRB 134158 B
* Geschaeftsfuehrer / Managing Director: Harald Welte
20 May
20 May
8:53 p.m.
Dear Pespin,
Does the osmo-bsc_mgcp.cfg has forgoten include on tar.gz you sent?
Can you send it that one please? Thanks.
best,
DUO
On Fri, May 18, 2018 at 10:28 PM, Pau Espin Pedrol <pespin(a)sysmocom.de>
wrote:
Hi Toby,
find attached my set of config files I use almost daily.
It assumes your PC (Core Network) ip addr is 192.168.30.1, and the address
of the BTS is 192.168.30.100.
Take into account I'm running only 1 osmo-mgw and I make both osmo-msc and
osmo-bsc connect to that one, in order to get rid of one more extra process.
These are the commands I use to run the components:
ggsn="sudo LD_LIBRARY_PATH=$mylibdir gdb -ex run --args
$mybindir/osmo-ggsn -c $myconfdir/osmo-ggsn.cfg"
sgsn="gdb -ex run --args $mybindir/osmo-sgsn -c $myconfdir/osmo-sgsn.cfg"
msc="gdb -ex run --args $mybindir/osmo-msc -c $myconfdir/osmo-msc.cfg"
hlr="gdb -ex run --args $mybindir/osmo-hlr -c $myconfdir/osmo-hlr.cfg
--database $myconfdir/hlr.db"
stp="gdb -ex run --args $mybindir/osmo-stp -c $myconfdir/osmo-stp.cfg"
bsc="gdb -ex run --arg $mybindir/osmo-bsc -c $myconfdir/osmo-bsc.cfg -s"
mgcp="gdb -ex run --arg $mybindir/osmo-bsc_mgcp -c
$myconfdir/osmo-bsc-mgcp.cfg"
mgw="gdb -ex run --arg $mybindir/osmo-mgw -c $myconfdir/osmo-mgw.cfg"
bts_trx="gdb -ex run --args $mybindir/osmo-bts-trx -c
$myconfdir/osmo-bts-trx.cfg -i 127.0.0.1 -r 1"
pcu="$mybindir/osmo-pcu -c $myconfdir/osmo-pcu.cfg"
--
- Pau Espin Pedrol <pespin(a)sysmocom.de> http://www.sysmocom.de/
=======================================================================
* sysmocom - systems for mobile communications GmbH
* Alt-Moabit 93
* 10559 Berlin, Germany
* Sitz / Registered office: Berlin, HRB 134158 B
* Geschaeftsfuehrer / Managing Director: Harald Welte
--
Best Regards,
Sandi
21 May
21 May
11:49 a.m.
On 20/05/18 20:53, Sandi Suhendro wrote:
Dear Pespin,
Does the osmo-bsc_mgcp.cfg has forgoten include on tar.gz you sent?
osmo-bsc_mgcp is obsolte and you should not be using that together with
split components. You should use osmo-mgw instead, for which I already
provided a config file.
--
- Pau Espin Pedrol <pespin(a)sysmocom.de> http://www.sysmocom.de/
=======================================================================
* sysmocom - systems for mobile communications GmbH
* Alt-Moabit 93
* 10559 Berlin, Germany
* Sitz / Registered office: Berlin, HRB 134158 B
* Geschaeftsfuehrer / Managing Director: Harald Welte
12:28 p.m.
Dear Pespin,
Thanks for explanation.
So i did use osmo-mgw only on the config you sent, but i still facing the
1st phone only hear voices and the 2nd phone not hear any voice. (It looks
like 1st phone not transnit or block by wrong configuration on my setup.
Then other problem is when i make call from 2nd phone to 1st phone, the
ring is only 1 sec then closed the connection but the caller still calling
mode.
Do you know what im facing of you think?
Thanks for any tips.
Regards,
DUO
On Mon, May 21, 2018, 16:49 Pau Espin Pedrol <pespin(a)sysmocom.de> wrote:
On 20/05/18 20:53, Sandi Suhendro wrote:
Dear Pespin,
Does the osmo-bsc_mgcp.cfg has forgoten include on tar.gz you sent?
osmo-bsc_mgcp is obsolte and you should not be using that together with
split components. You should use osmo-mgw instead, for which I already
provided a config file.
--
- Pau Espin Pedrol <pespin(a)sysmocom.de> http://www.sysmocom.de/
=======================================================================
* sysmocom - systems for mobile communications GmbH
* Alt-Moabit 93
* 10559 Berlin, Germany
* Sitz / Registered office: Berlin, HRB 134158 B
* Geschaeftsfuehrer / Managing Director: Harald Welte
22 May
22 May
4:52 p.m.
On Fri, May 18, 2018 at 03:45:52PM +0300, toby wrote:
Dear All,
I was wondering whether anyone could please provide me a set of fully
working configuration files for a network-in-the-box setup with msc, bsc,
stp, hlr, mgw parts (not osmo-nitb). I have successfully compiled all the
required software from source, however, the migration guide is incomplete
and I cannot seem to find a simple tutorial for building an osmo network
from scratch using all the new components. I want to set up a 2g network for
calls/sms, i don't need gprs though.
How about
http://osmocom.org/projects/cellular-infrastructure/wiki/Osmocom_Network_In…
which the migration guide points at, btw.
If the migration guide is incomplete, let's complete it; start by creating a
ticket with the list of missing parts.
~N
2187
days inactive
2191
days old
5 comments
4 participants
participants (4)
-
Neels Hofmeyr -
Pau Espin Pedrol -
Sandi Suhendro -
toby