23 Jul
2010
23 Jul
'10
8:52 a.m.
Hi, again!
So, as I said in my last E-Mail, I got a new BTS (DSC1800).
Now I have to configure it, so I started ipaccess-find to get his IP
and then ipaccess-config to configure it.
I get this error:
lucabert@Luca:/tmp$ ipaccess-config -u 151/0/0 -o 192.168.1.18
192.168.1.108 ipaccess-config (C) 2009-2010 by Harald Welte and others
This is FREE SOFTWARE with ABSOLUTELY NO WARRANTY
Trying to connect to ip.access BTS ...
Lost some E1 TEI link
Lost some E1 TEI link
Segmentation fault
Can someone say me what is the problem?
Thanks!
--
_______________________________________________________________________
Luca Bertoncello
Entwicklung Mail: bertoncello(a)netzing.de
NETZING Solutions AG Tel.: 0351/41381 - 23
Fröbelstr. 57, 01159 Dresden Fax: 0351/41381 - 12
HRB 18926 / Ust.ID DE211326547 Mail: netzing.ag(a)netzing.de
_______________________________________________________________________
23 Jul
23 Jul
9:25 a.m.
On 07/23/2010 02:52 PM, Luca Bertoncello wrote:
Segmentation fault
I can not comment on the other bits (besides Nordin having had
issues as well), the segfault is an issue I introduced. In the
coredump uploaded to the On Waves servers it is crashing in my
drop OML when RSL failed code and I plan to fix that once I have
my private stuff settled.
9:31 a.m.
Am Fri, 23 Jul 2010 15:25:32 +0800
schrieb Holger Hans Peter Freyther <holger(a)freyther.de>de>:
I can not comment on the other bits (besides Nordin
having had
issues as well), the segfault is an issue I introduced. In the
coredump uploaded to the On Waves servers it is crashing in my
drop OML when RSL failed code and I plan to fix that once I have
my private stuff settled.
Aha, this is for me a very huge problem, because I have a demonstration
next Monday and I have just today to test all...
Could you say me, when you introduce this problem, so that I can use a
previous version to configure my BTS?
Thanks a lot!
--
_______________________________________________________________________
Luca Bertoncello
Entwicklung Mail: bertoncello(a)netzing.de
NETZING Solutions AG Tel.: 0351/41381 - 23
Fröbelstr. 57, 01159 Dresden Fax: 0351/41381 - 12
HRB 18926 / Ust.ID DE211326547 Mail: netzing.ag(a)netzing.de
_______________________________________________________________________
9:47 a.m.
Am Fri, 23 Jul 2010 15:25:32 +0800
schrieb Holger Hans Peter Freyther <holger(a)freyther.de>de>:
On 07/23/2010 02:52 PM, Luca Bertoncello wrote:
I tried a very old version I have in a old PC (compiled on 16/10/2009).
Now there is no segmentation fault, but it does not work...
I get:
netzing@debian503:~/openbsc/openbsc/src$ ./ipaccess-config -u 151/0/0
-o 192.168.1.18 -r 192.168.1.108
ipaccess-config (C) 2009 by Harald Welte This is FREE SOFTWARE with
ABSOLUTELY NO WARRANTY
Trying to connect to ip.access BTS ...
BTS disappeared, dead socket
Lost some E1 TEI link
and it waits until the end of the eternity (I suppose).
Is it possible, that the problem is on the BTS? How can I be sure?
Thanks a lot!
--
_______________________________________________________________________
Luca Bertoncello
Entwicklung Mail: bertoncello(a)netzing.de
NETZING Solutions AG Tel.: 0351/41381 - 23
Fröbelstr. 57, 01159 Dresden Fax: 0351/41381 - 12
HRB 18926 / Ust.ID DE211326547 Mail: netzing.ag(a)netzing.de
_______________________________________________________________________
Segmentation fault
I can not comment on the other bits (besides Nordin having had
issues as well), the segfault is an issue I introduced. In the
coredump uploaded to the On Waves servers it is crashing in my
drop OML when RSL failed code and I plan to fix that once I have
my private stuff settled. 
10:02 a.m.
First of all, how did you configure?
You wrote:
lucabert at Luca <https://lists.gnumonks.org/mailman/listinfo/openbsc>:/tmp$
ipaccess-config -u 151/0/0 -o 192.168.1.18
192.168.1.108 ipaccess-config (C) 2009-2010 by Harald Welte and others
This is FREE SOFTWARE with ABSOLUTELY NO WARRANTY
Trying to connect to ip.access BTS ...
Lost some E1 TEI link
Lost some E1 TEI link
Segmentation fault
I think it's best to split it in two steps:
./ipaccess-config -u 151/0/0 bts-ip
./ipaccess-config -o bsc-ip bts-ip
You need also to power off than power on and than try it again.
My BTS kind of got lock as TRX (as a slave of master BTS) and can't send BCCH
anymore.
This problem occured since I tried to modify the bts-id, that's the middle number of
the id.
I recommend you not to do the same, otherwise your bts won't work properly.
On 23-7-2010 9:47, Luca Bertoncello wrote:
Am Fri, 23 Jul 2010 15:25:32 +0800
schrieb Holger Hans Peter Freyther<holger(a)freyther.de>de>:
On 07/23/2010 02:52 PM, Luca Bertoncello wrote:
I tried a very old version I have in a old PC (compiled on 16/10/2009).
Now there is no segmentation fault, but it does not work...
I get:
netzing@debian503:~/openbsc/openbsc/src$ ./ipaccess-config -u 151/0/0
-o 192.168.1.18 -r 192.168.1.108
ipaccess-config (C) 2009 by Harald Welte This is FREE SOFTWARE with
ABSOLUTELY NO WARRANTY
Trying to connect to ip.access BTS ...
BTS disappeared, dead socket
Lost some E1 TEI link
and it waits until the end of the eternity (I suppose).
Is it possible, that the problem is on the BTS? How can I be sure?
Thanks a lot!
Segmentation fault
I can not comment on the other bits (besides Nordin having had
issues as well), the segfault is an issue I introduced. In the
coredump uploaded to the On Waves servers it is crashing in my
drop OML when RSL failed code and I plan to fix that once I have
my private stuff settled.
10:35 a.m.
Am Fri, 23 Jul 2010 10:02:57 +0200
schrieb Nordin <bouchtaoui(a)gmail.com>om>:
First of all, how did you configure?
You wrote:
lucabert at Luca
<https://lists.gnumonks.org/mailman/listinfo/openbsc>:/tmp$
ipaccess-config -u 151/0/0 -o 192.168.1.18 192.168.1.108
ipaccess-config (C) 2009-2010 by Harald Welte and others This is FREE
SOFTWARE with ABSOLUTELY NO WARRANTY
Trying to connect to ip.access BTS ...
Lost some E1 TEI link
Lost some E1 TEI link
Segmentation fault
I think it's best to split it in two steps:
./ipaccess-config -u 151/0/0 bts-ip
./ipaccess-config -o bsc-ip bts-ip
I tried it, too! Same error... :(
You need also to power off than power on and than try
it again.
And I tried this, too. Unfortunately no better results...
My BTS kind of got lock as TRX (as a slave of master
BTS) and can't
send BCCH anymore. This problem occured since I tried to modify the
bts-id, that's the middle number of the id.
I recommend you not to do the same, otherwise your bts won't work
properly.
OK, thanks for the advice, but I first need to configure the BTS to
speech with my PC and my OpenBSC...
Thanks
--
_______________________________________________________________________
Luca Bertoncello
Entwicklung Mail: bertoncello(a)netzing.de
NETZING Solutions AG Tel.: 0351/41381 - 23
Fröbelstr. 57, 01159 Dresden Fax: 0351/41381 - 12
HRB 18926 / Ust.ID DE211326547 Mail: netzing.ag(a)netzing.de
_______________________________________________________________________
10:40 a.m.
On 07/23/2010 03:47 PM, Luca Bertoncello wrote:
I get:
netzing@debian503:~/openbsc/openbsc/src$ ./ipaccess-config -u 151/0/0
-o 192.168.1.18 -r 192.168.1.108
ipaccess-config (C) 2009 by Harald Welte This is FREE SOFTWARE with
ABSOLUTELY NO WARRANTY
and it waits until the end of the eternity (I
suppose).
Is it possible, that the problem is on the BTS? How can I be sure?
As usual for being able to debug problems:
Segmentation Fault -> Attach a Backtrace
Some Protocol Error -> Attach a Packetdump.
I don't have access to GSM1800 BTS so I will not be able to test a
similar setup.
10:47 a.m.
Am Fri, 23 Jul 2010 16:40:24 +0800
schrieb Holger Hans Peter Freyther <holger(a)freyther.de>de>:
As usual for being able to debug problems:
Segmentation Fault -> Attach a Backtrace
Some Protocol Error -> Attach a Packetdump.
You're right! Please excuse me...
Attached the PCAP file and follow the backtrace:
lucabert@Luca:~/BSC/openbsc/openbsc/src/ipaccess$ gdb ./ipaccess-config /tmp/core
GNU gdb 6.8-debian
Copyright (C) 2008 Free Software Foundation, Inc.
License GPLv3+: GNU GPL version 3 or later <http://gnu.org/licenses/gpl.html>
This is free software: you are free to change and redistribute it.
There is NO WARRANTY, to the extent permitted by law. Type "show copying"
and "show warranty" for details.
This GDB was configured as "i486-linux-gnu"...
warning: Can't read pathname for load map: Input/output error.
Reading symbols from /usr/local/lib/libosmocore.so.0...done.
Loaded symbols for /usr/local/lib/libosmocore.so.0
Reading symbols from /lib/tls/i686/cmov/libdl.so.2...done.
Loaded symbols for /lib/tls/i686/cmov/libdl.so.2
Reading symbols from /usr/lib/libdbi.so.0...done.
Loaded symbols for /usr/lib/libdbi.so.0
Reading symbols from /lib/tls/i686/cmov/libcrypt.so.1...done.
Loaded symbols for /lib/tls/i686/cmov/libcrypt.so.1
Reading symbols from /lib/tls/i686/cmov/libc.so.6...done.
Loaded symbols for /lib/tls/i686/cmov/libc.so.6
Reading symbols from /lib/ld-linux.so.2...done.
Loaded symbols for /lib/ld-linux.so.2
Reading symbols from /lib/tls/i686/cmov/libm.so.6...done.
Loaded symbols for /lib/tls/i686/cmov/libm.so.6
Core was generated by `ipaccess-config -u 151/0/0 -o 192.168.1.18 192.168.1.108'.
Program terminated with signal 11, Segmentation fault.
[New process 27115]
#0 bsc_unregister_fd (fd=0x80c59f4) at ../include/osmocore/linuxlist.h:107
107 next->prev = prev;
(gdb)
Thanks
--
_______________________________________________________________________
Luca Bertoncello
Entwicklung Mail: bertoncello(a)netzing.de
NETZING Solutions AG Tel.: 0351/41381 - 23
Fröbelstr. 57, 01159 Dresden Fax: 0351/41381 - 12
HRB 18926 / Ust.ID DE211326547 Mail: netzing.ag(a)netzing.de
_______________________________________________________________________
10:58 a.m.
Core was generated by `ipaccess-config -u 151/0/0 -o
192.168.1.18 192.168.1.108'.
Program terminated with signal 11, Segmentation fault.
[New process 27115]
#0 bsc_unregister_fd (fd=0x80c59f4) at ../include/osmocore/linuxlist.h:107
107 next->prev = prev;
(gdb)
That's not much of a backtrace
Please, use the 'bt' command to get the full backtrace.
Using the 'bt full' command if even better. And to further improve
things you could also make sure the libosmocore and openbsc were
compiled with full debugging symbol by including -ggdb if the
CFLAGS/LDFLAGS
Sylvain
11:22 a.m.
Am Fri, 23 Jul 2010 10:58:05 +0200
schrieb Sylvain Munaut <246tnt(a)gmail.com>om>:
That's not much of a backtrace
Please, use the 'bt' command to get the full backtrace.
Using the 'bt full' command if even better. And to further improve
things you could also make sure the libosmocore and openbsc were
compiled with full debugging symbol by including -ggdb if the
CFLAGS/LDFLAGS
OK, here more information:
(gdb) bt full
#0 bsc_unregister_fd (fd=0x80c59f4) at ../include/osmocore/linuxlist.h:107
No locals.
#1 0x08055c67 in ipaccess_drop_rsl (trx=0x806d880) at input/ipaccess.c:427
ts = (struct e1inp_ts *) 0x80c548c
#2 0x08055d3f in ipaccess_drop_oml (bts=0x806cc38) at input/ipaccess.c:368
trx = (struct gsm_bts_trx *) 0x806d880
ts = <value optimized out>
line = (struct e1inp_line *) 0x80c4ef8
#3 0x08055d97 in ipaccess_drop (ts=0x0, bfd=<value optimized out>) at
input/ipaccess.c:400
link = (struct e1inp_sign_link *) 0x0
bts_nr = 0
#4 0x080563ca in ipaccess_fd_cb (bfd=0x80c5470, what=<value optimized out>) at
input/ipaccess.c:451
line = <value optimized out>
ts_nr = 1
rc = <value optimized out>
#5 0xb76e8073 in bsc_select_main (polling=0) at select.c:119
flags = 1
ufd = (struct bsc_fd *) 0x80c5470
tmp = (struct bsc_fd *) 0xb76f93a0
readset = {__fds_bits = {0 <repeats 32 times>}}
writeset = {__fds_bits = {0 <repeats 32 times>}}
exceptset = {__fds_bits = {0 <repeats 32 times>}}
work = 0
rc = <value optimized out>
no_time = {tv_sec = 0, tv_usec = 0}
#6 0x0804af42 in main (argc=6, argv=0xbffbde84) at ipaccess-config.c:861
bts = (struct gsm_bts *) 0x806cc38
sin = {sin_family = 2, sin_port = 48651, sin_addr = {s_addr = 1812048064},
sin_zero = "\000\000\000\000\000\000\000"}
rc = 135027188
option_index = 0
stream_id = <value optimized out>
stderr_target = <value optimized out>
long_options = {{name = 0x8061169 "unit-id", has_arg = 1, flag = 0x0,
val = 117}, {name = 0x8061171 "oml-ip", has_arg = 1, flag = 0x0, val = 111}, {
name = 0x8061178 "ip-address", has_arg = 1, flag = 0x0, val = 105}, {name =
0x8061183 "ip-gateway", has_arg = 1, flag = 0x0, val = 103}, {name = 0x806118e
"restart",
has_arg = 0, flag = 0x0, val = 114}, {name = 0x8061196 "nvram-flags",
has_arg = 1, flag = 0x0, val = 110}, {name = 0x80611a2 "nvattr-set", has_arg =
1, flag = 0x0,
val = 83}, {name = 0x80611ad "nvattr-unset", has_arg = 1, flag = 0x0, val =
85}, {name = 0x80611ba "help", has_arg = 0, flag = 0x0, val = 104}, {name =
0x80611bf "listen",
has_arg = 1, flag = 0x0, val = 108}, {name = 0x80611c6 "stream-id", has_arg
= 1, flag = 0x0, val = 115}, {name = 0x80611d0 "software", has_arg = 1, flag =
0x0, val = 100}, {
name = 0x806106d "firmware", has_arg = 1, flag = 0x0, val = 102}, {name =
0x80611d9 "write-firmware", has_arg = 0, flag = 0x0, val = 119}, {name = 0x0,
has_arg = 0,
flag = 0x0, val = 0}}
Thanks
--
_______________________________________________________________________
Luca Bertoncello
Entwicklung Mail: bertoncello(a)netzing.de
NETZING Solutions AG Tel.: 0351/41381 - 23
Fröbelstr. 57, 01159 Dresden Fax: 0351/41381 - 12
HRB 18926 / Ust.ID DE211326547 Mail: netzing.ag(a)netzing.de
_______________________________________________________________________
11:23 a.m.
On 07/23/2010 04:47 PM, Luca Bertoncello wrote:
Attached the PCAP file and follow the backtrace:
ip.src == 192.168.1.108 || ip.dst == 192.168.1.108
doesn't really show much information...
Your PC opens the connection, it is acked
The BTS sends sends a IPA Identity ACK, we send one.
The BTS closes the connections.
Now the question is why, and I don't know. :)
11:27 a.m.
Am Fri, 23 Jul 2010 17:23:40 +0800
schrieb Holger Hans Peter Freyther <holger(a)freyther.de>de>:
Could is the DSC1800 KO?
The device is NOT new, but it comes after more experiments from a
university...
Is there a possibility to check, if the DSC1800 has a problem?
Thanks
--
_______________________________________________________________________
Luca Bertoncello
Entwicklung Mail: bertoncello(a)netzing.de
NETZING Solutions AG Tel.: 0351/41381 - 23
Fröbelstr. 57, 01159 Dresden Fax: 0351/41381 - 12
HRB 18926 / Ust.ID DE211326547 Mail: netzing.ag(a)netzing.de
_______________________________________________________________________
Attached the
PCAP file and follow the backtrace:
ip.src == 192.168.1.108 || ip.dst == 192.168.1.108
doesn't really show much information...
Your PC opens the connection, it is acked
The BTS sends sends a IPA Identity ACK, we send one.
The BTS closes the connections.
Now the question is why, and I don't know. :)
11:33 a.m.
Could is the DSC1800 KO?
The device is NOT new, but it comes after more experiments from a
university...
Is there a possibility to check, if the DSC1800 has a problem?
Did you do a full factory reset with a reset dongle ?
You can try the ipaccess-telnet utility (search the ml or the wiki for
details) and see what the console says (if anything).
Sylvain
11:42 a.m.
Am Fri, 23 Jul 2010 11:33:22 +0200
schrieb Sylvain Munaut <246tnt(a)gmail.com>om>:
No, I didn't... What is this "reset dongle"?
Is there a
possibility to check, if the DSC1800 has a problem?
Did you do a full factory reset with a reset dongle ? You can try the ipaccess-telnet utility (search the ml
or the wiki for
details) and see what the console says (if anything).
Unfortunately I can telnet, because I can't send the NVRAM flag
0x400... :(
Any other suggestion?
Thanks
--
_______________________________________________________________________
Luca Bertoncello
Entwicklung Mail: bertoncello(a)netzing.de
NETZING Solutions AG Tel.: 0351/41381 - 23
Fröbelstr. 57, 01159 Dresden Fax: 0351/41381 - 12
HRB 18926 / Ust.ID DE211326547 Mail: netzing.ag(a)netzing.de
_______________________________________________________________________
11:49 a.m.
Is there a possibility to check, if the DSC1800 has a
problem?
Did you do a full factory reset with a reset dongle ?
11:53 a.m.
Am Fri, 23 Jul 2010 11:49:23 +0200
schrieb Sylvain Munaut <246tnt(a)gmail.com>om>:
See
http://lists.gnumonks.org/pipermail/openbsc/2009-August/000804.html
The dongle can be emulated with a carefully placed conductive pin
(screwdriver, needed, probe, whatever you have laying around :)
Unfortunately I don't have a dongle and I don't have the possibility to
make one...
Other suggestion?
Thanks
--
_______________________________________________________________________
Luca Bertoncello
Entwicklung Mail: bertoncello(a)netzing.de
NETZING Solutions AG Tel.: 0351/41381 - 23
Fröbelstr. 57, 01159 Dresden Fax: 0351/41381 - 12
HRB 18926 / Ust.ID DE211326547 Mail: netzing.ag(a)netzing.de
_______________________________________________________________________
11:57 a.m.
http://lists.gnumonks.org/pipermail/openbsc/2009-August/000804.html
The dongle can be emulated with a carefully placed conductive pin
(screwdriver, needed, probe, whatever you have laying around :)
Unfortunately I don't have a dongle and I don't have the possibility to
make one...
12:30 p.m.
Am Fri, 23 Jul 2010 11:57:48 +0200
schrieb Sylvain Munaut <246tnt(a)gmail.com>om>:
That's what I noted above, you don't _need_ a
dongle ... you just need
to follow the procedure and instead of the dongle, just short the pin
9 & 10 of TIB-IN with anything metallic/conductive.
OK, I understand, but without a USB-connector it is very hard to do
without damages...
I don't want to try. The BTS has to give back to the university in the
next days...
Anyway thanks!
--
_______________________________________________________________________
Luca Bertoncello
Entwicklung Mail: bertoncello(a)netzing.de
NETZING Solutions AG Tel.: 0351/41381 - 23
Fröbelstr. 57, 01159 Dresden Fax: 0351/41381 - 12
HRB 18926 / Ust.ID DE211326547 Mail: netzing.ag(a)netzing.de
_______________________________________________________________________
12:41 p.m.
That's
what I noted above, you don't _need_ a dongle ... you just need
to follow the procedure and instead of the dongle, just short the pin
9 & 10 of TIB-IN with anything metallic/conductive.
OK, I understand, but without a USB-connector it is very hard to do
without damages... I don't want to try. The BTS has to give back to
the university in the
next days...
well, there is always the 'It was like that when I got it' excuse :)
12:48 p.m.
Am Fri, 23 Jul 2010 12:41:28 +0200
schrieb Sylvain Munaut <246tnt(a)gmail.com>om>:
Then I didn't understood which port do you mean...
Now I found the connector you mean. It's like a RJ45, but with 10 pins.
Isn't it?
Now which are the PINs 9 and 10? The last two LEFT or the last two
RIGHT?
Thanks!
--
_______________________________________________________________________
Luca Bertoncello
Entwicklung Mail: bertoncello(a)netzing.de
NETZING Solutions AG Tel.: 0351/41381 - 23
Fröbelstr. 57, 01159 Dresden Fax: 0351/41381 - 12
HRB 18926 / Ust.ID DE211326547 Mail: netzing.ag(a)netzing.de
_______________________________________________________________________
OK, I
understand, but without a USB-connector it is very hard to do
without damages...
???
Have you _looked_ at the connector. It has nothing to do with USB and
9/10 are the twi pins on the exterior ... can't miss them (unless
you're half-blind or have any other condition obviously ...)
1:03 p.m.
On 23-7-2010 12:48, Luca Bertoncello wrote:
Am Fri, 23 Jul 2010 12:41:28 +0200
schrieb Sylvain Munaut<246tnt(a)gmail.com>om>:
Then I didn't understood which port do you mean...
Now I found the connector you mean. It's like a RJ45, but with 10 pins.
Isn't it?
Now which are the PINs 9 and 10? The last two LEFT or the last two
RIGHT?
Thanks!
-----------------------------
| U U U U U U U U U U |
| | | |
| 0 .. 9 10 |
| |
| |
|___________ ___________|
|_____|
I hope this helps :)
OK, I
understand, but without a USB-connector it is very hard to do
without damages...
???
Have you _looked_ at the connector. It has nothing to do with USB and
9/10 are the twi pins on the exterior ... can't miss them (unless
you're half-blind or have any other condition obviously ...)
1:09 p.m.
Am Fri, 23 Jul 2010 13:03:53 +0200
schrieb Nordin <bouchtaoui(a)gmail.com>om>:
Unfortunately not...
I tried to short PIN9+10, and wait until the LED flashes (more than 2
mins), then I powered off and on the BTS.
It does not seems it was resetted...
Other suggestions?
--
_______________________________________________________________________
Luca Bertoncello
Entwicklung Mail: bertoncello(a)netzing.de
NETZING Solutions AG Tel.: 0351/41381 - 23
Fröbelstr. 57, 01159 Dresden Fax: 0351/41381 - 12
HRB 18926 / Ust.ID DE211326547 Mail: netzing.ag(a)netzing.de
_______________________________________________________________________
Now I found
the connector you mean. It's like a RJ45, but with 10
pins. Isn't it?
Now which are the PINs 9 and 10? The last two LEFT or the last two
RIGHT?
Thanks!
-----------------------------
| U U U U U U U U U U |
| | | |
| 0 .. 9 10 |
| |
| |
|___________ ___________|
|_____|
I hope this helps :)
1:15 p.m.
Than you haven't shortcutted the two pins well, cause if you did, after
30 seconds it flashes red light.
I had that in the first time too, until I found a way to shortcut it
well. I used a screwdriver, just try it again, it should work. Don't
worry, it won't damage a lot :p
On 23-7-2010 13:09, Luca Bertoncello wrote:
Am Fri, 23 Jul 2010 13:03:53 +0200
schrieb Nordin<bouchtaoui(a)gmail.com>om>:
Unfortunately not...
I tried to short PIN9+10, and wait until the LED flashes (more than 2
mins), then I powered off and on the BTS.
It does not seems it was resetted...
Other suggestions?
Now I
found the connector you mean. It's like a RJ45, but with 10
pins. Isn't it?
Now which are the PINs 9 and 10? The last two LEFT or the last two
RIGHT?
Thanks!
-----------------------------
| U U U U U U U U U U |
| | | |
| 0 .. 9 10 |
| |
| |
|___________ ___________|
|_____|
I hope this helps :)
1:26 p.m.
Am Fri, 23 Jul 2010 13:15:32 +0200
schrieb Nordin <bouchtaoui(a)gmail.com>om>:
Than you haven't shortcutted the two pins well,
cause if you did,
after 30 seconds it flashes red light.
I had that in the first time too, until I found a way to shortcut it
well. I used a screwdriver, just try it again, it should work. Don't
worry, it won't damage a lot :p
Unfortunately not...
I just tried again. After ~30 seconds the LED flashes, but as I powered
on it has the same configured data and I can't configure it...
Now I have this idea: I supply the power using PoE. Maybe have I to
supply the power not with PoE?
Thanks
--
_______________________________________________________________________
Luca Bertoncello
Entwicklung Mail: bertoncello(a)netzing.de
NETZING Solutions AG Tel.: 0351/41381 - 23
Fröbelstr. 57, 01159 Dresden Fax: 0351/41381 - 12
HRB 18926 / Ust.ID DE211326547 Mail: netzing.ag(a)netzing.de
_______________________________________________________________________
2 p.m.
On 23-7-2010 13:26, Luca Bertoncello wrote:
Am Fri, 23 Jul 2010 13:15:32 +0200
schrieb Nordin<bouchtaoui(a)gmail.com>om>:
Are you sure? You can use ipaccess-find to see if the id is modified. If
I remember it will be something like 65xxx/0/0
Than you haven't shortcutted the two pins
well, cause if you did,
after 30 seconds it flashes red light.
I had that in the first time too, until I found a way to shortcut it
well. I used a screwdriver, just try it again, it should work. Don't
worry, it won't damage a lot :p
Unfortunately not...
I just tried again. After ~30 seconds the LED flashes, but as I powered
on it has the same configured data and I can't configure it...
Now I have this idea: I supply the power using PoE.
Maybe have I to
supply the power not with PoE?
I don't see any difference, If you see the BTS's LED flashes, it's
working. But maybe you should use the normal power supplier that comes
with the BTS.
It's possible the PoE you use is not strong enough.
Thanks
2:05 p.m.
Am Fri, 23 Jul 2010 14:00:49 +0200
schrieb Nordin <bouchtaoui(a)gmail.com>om>:
Are you sure? You can use ipaccess-find to see if the
id is modified.
If I remember it will be something like 65xxx/0/0
Yes! The first line of ipaccess-find has 65535/X/X (I don't have it
now, and I don't remember the value of X).
But starting from the second it is as before...
I don't see any difference, If you see the
BTS's LED flashes, it's
working. But maybe you should use the normal power supplier that
comes with the BTS.
It's possible the PoE you use is not strong enough.
Unfortunately I don't have other power supply... :(
Thanks
--
_______________________________________________________________________
Luca Bertoncello
Entwicklung Mail: bertoncello(a)netzing.de
NETZING Solutions AG Tel.: 0351/41381 - 23
Fröbelstr. 57, 01159 Dresden Fax: 0351/41381 - 12
HRB 18926 / Ust.ID DE211326547 Mail: netzing.ag(a)netzing.de
_______________________________________________________________________
25 Jul
25 Jul
8:02 p.m.
On Fri, Jul 23, 2010 at 11:53:52AM +0200, Luca Bertoncello wrote:
Am Fri, 23 Jul 2010 11:49:23 +0200
schrieb Sylvain Munaut <246tnt(a)gmail.com>om>:
Luca, it is not the responsibility of this community mailing list to
fix your problems at work. If NETZING has not bought a reset dongle and
has no ability to manufacture one (which I seriously doubt, I have seen
the NETZING electronics lab before) - then you will simply have to tell
NETZING that this device will have to be bought or manufactured.
If you are on a short deadline than I am sorry to hear this, but you will
have to solve the problem somehow, and it is not the responsibility of
the people on this list to do so.
Also, please spend more time analyzing problems and investigating possible
resolutions. Your follow-up mails regarding a USB connector are showing
that you have neither studied the ip.access documentation (that NETZING has),
nor our wiki in detail before contacting the list.
Please use this list after you have exhausted all other resources.
Regards,
Harald.
--
- Harald Welte <laforge(a)gnumonks.org> http://laforge.gnumonks.org/
============================================================================
"Privacy in residential applications is a desirable marketing option."
(ETSI EN 300 175-7 Ch. A6)
See
http://lists.gnumonks.org/pipermail/openbsc/2009-August/000804.html
The dongle can be emulated with a carefully placed conductive pin
(screwdriver, needed, probe, whatever you have laying around :)
Unfortunately I don't have a dongle and I don't have the possibility to
make one...
5046
days inactive
5048
days old
27 comments
5 participants
participants (5)
-
Harald Welte -
Holger Hans Peter Freyther -
Luca Bertoncello -
Nordin -
Sylvain Munaut