Thank you for the quick and helpful replies, Andreas and Holger! I had
a feeling there was an easy answer.
-Tom
Message: 6
Date: Wed, 29 Feb 2012 08:21:13 +0100
From: jolly <andreas(a)eversberg.eu>
To: Thomas Cooper <tacooper(a)vt.edu>
Cc: openbsc(a)lists.osmocom.org
Subject: Re: Specifying channel mode for speech
Message-ID: <4F4DD1E9.8080409(a)eversberg.eu>
Content-Type: text/plain; charset=ISO-8859-1
Thomas Cooper wrote:
Osmo-bts gets the MODE_MODIFY_REQ from OpenBSC
with
GSM48_CMODE_SPEECH_EFR to use for the channel mode. However, I would
like to be able to specify using GSM48_CMODE_SPEECH_V1 instead (which
is FR; EFR is not supported in L1). Is there an easy way to set the
preferred channel mode/audio support? I didn't see anything on the VTY
wiki or in the config file.
hi tom,
you may change the line 46 at mncc_builtin.c. the first entry in this
array is the full rate code, the second entry is the half rate codec.
(depending on the trx configuration) just change the first entry to
GSM48_CMODE_SPEECH_V1.
regards,
andreas
------------------------------
Message: 8
Date: Wed, 29 Feb 2012 09:54:24 +0100
From: Holger Hans Peter Freyther <holger(a)freyther.de>
To: openbsc(a)lists.osmocom.org
Subject: Re: Specifying channel mode for speech
Message-ID: <4F4DE7C0.5000000(a)freyther.de>
Content-Type: text/plain; charset=ISO-8859-1
On 02/29/2012 08:21 AM, jolly wrote:
you may change the line 46 at mncc_builtin.c. the
first entry in this
array is the full rate code, the second entry is the half rate codec.
(depending on the trx configuration) just change the first entry to
GSM48_CMODE_SPEECH_V1.
you can change this with the VTY config. Look at commit
ab386e6120559ef2deb6a27f4455539cba920c9d that introduced it.
holger