baseband-devel

baseband-devel@lists.osmocom.org

1 participants
2024 discussions

MOT call/sms problem
by tao shang 04 Jan '15

04 Jan '15

Hi,all: I have got a C118 to test mobile function 1) To get the master branch code and to compile it. 2) To insert simcard(13681******) into the phone and to modify the mobile.cfg to use real simcard. 3) To connect the phone with PC(core i5/ubuntu 12.04). 4) After downloading the firmware, to start the mobile App(#sudo ./mobile 2>&1 | tee > log.txt). 5) I can see that the location update process is ok and an TMSI is allocated to the phone. 6) To telnet into the osmocon, I can start a call to another phone (#Call 1 13564******). 7) I can send a sms to another phone. So far, all(MOC) is ok. But If using the osmocommbb phone(13681******) as the target phone(MOT), (for example, Iuse a normal phone to call the osmocombb phone), it is very rare that the osmocombb phone have a respose to the paging. 1) I have check the paging messages in the log.txt file and find that there only one paging respone messages such as "TMSI MATCH" as I have call the osmocombb phone about 20 times. In the success case: ..............gsm322.c:1966 Cell ARFCN 13 selected.gsm322.c:2423 Tune to frequency 13.gsm322.c:468 Sync to ARFCN=13 rxlev=-68 (Sysinfo, ccch mode NON-COMB)gsm322.c:2450 Cell available.gsm322.c:4049 (ms 1) Event 'EVENT_CELL_FOUND' for Cell selection in state 'C5 choose cell'gsm322.c:3383 Camping normally on cell (ARFCN=13 mcc=460 mnc=00 China, China Mobile)gsm322.c:829 new state 'C5 choose cell' -> 'C3 camped normally'gsm48_mm.c:4325 (ms 1) Received 'MM_EVENT_CELL_SELECTED' event in state wait for network commandgsm48_mm.c:1130 We are in registered LAI as returning to MM IDLEgsm48_mm.c:919 new state wait for network command -> MM IDLE, normal servicegsm48_mm.c:426 starting T3212 (periodic loc. upd. delay) with 7200 secondsgsm322.c:2947 Channel synched. (ARFCN=13, snr=16, BSIC=29).............. gsm48_rr.c:2116 TMSI a0b186e9 matchesgsm48_rr.c:1307 Establish radio link due to paging requestgsm322.c:4049 (ms 1) Event 'EVENT_LEAVE_IDLE' for Cell selection in state 'C3 camped normally'gsm322.c:829 new state 'C3 camped normally' -> 'connected mode 1'gsm322.c:3665 Going to camping (normal) ARFCN 13.gsm322.c:468 Sync to ARFCN=13 rxlev=-68 (Sysinfo, ccch mode NON-COMB)gsm48_rr.c:355 new state idle -> connection pendinggsm48_rr.c:1422 CHANNEL REQUEST: 20 (PAGING TCH/F)gsm322.c:2947 Channel synched. (ARFCN=13, snr=16, BSIC=29) .......... From the log info I can see that: a) the phone is camped in ARFCN 13 and receive paging in this cell. b) the signal of cell is strong enough 2) I have no an OpenBTS device to send some paging messages to check where is the problem further. Maybe I miss something. Any suggestion is appreciated! Thank you very much! Best Regards Shang

1 0

SB detect error while making a call in osmocomBB
by Ravi Sharan 30 Dec '14

30 Dec '14

Hello, I am playing with osmocomBB on Arch Linux, branched off from jolly/handover. I am running the osmocomBB firmware by chainloading the layer1 onto Motorola C115(and layer23 on host PC, obviously). Everything works fine (location update, normal cell selection and re-selection) while in Idle mode. As soon as the phone enters the dedicated mode (ex: the moment I make a call or receive an indication about an incoming call), I notice that the layer1 starts complaining about erroneous detection of Synchronization Burst (SB) from the neighboring-cells, making the mobile stick to a single ARFCN throughout the call. As soon as the mobile leaves dedicated mode, the layer1 stops complaining about SB detect error and resumes with cell-selection and re-selection normally. I dug up the layer1/prim_fbsb.c code off the same branch and came to two conclusions (though I am unable to find out what the actual cause to this problem is): - Either the TPU is programmed to detect information from different timeslot using l1s_rx_win_ctrl(). I make this assumption because, while the layer1 complains about SB detect error, layer23 complains about bad frame with >= 70 bit errors in the frame. - Or, l1s_neigh_sb_resp() is receiving the correct frame and ending up in a bad CRC check with the received SCH burst header (all 11 times !). I have tested the osmocomBB firmware with both openBTS network setup and public, licensed networks and have come to these conclusions, as the errors were occurring in both the cases. You can find the error logs in here <https://gist.github.com/NinjaComics/1bce7b581de4f1976753> and here <https://gist.github.com/NinjaComics/a07699fd283c525de3fa> (these logs are based of public networks). Thanks in advance, any help is appreciated. -- Ravi Sharan B A G.

1 0

Same MAKE problem
by tom 22 Dec '14

22 Dec '14

Hi all I asked this question some time back and still waiting for some help. As someone who is trying very hard to learn about Osmocom surly there is someone interested in helping me. If not I don't see the point of having this mailing list. We all have to start somewhere. Tom I am trying to build osmocombb using GwmB7UGK.c file. When I run MAKE I get the following errors. # make CC app_ccch_scan.o app_ccch_scan.c:74:1: warning: useless storage class specifier in empty declaration [enabled by default] app_ccch_scan.c:79:1: warning: useless storage class specifier in empty declaration [enabled by default] app_ccch_scan.c: In function ‘dump_bcch’: app_ccch_scan.c:213:29: error: ‘CCCH_MODE_NON_COMBINED2’ undeclared (first use in this function) app_ccch_scan.c:213:29: note: each undeclared identifier is reported only once for each function it appears in app_ccch_scan.c:216:29: error: ‘CCCH_MODE_NON_COMBINED4’ undeclared (first use in this function) app_ccch_scan.c:219:29: error: ‘CCCH_MODE_NON_COMBINED6’ undeclared (first use in this function) app_ccch_scan.c: In function ‘gsm48_rx_imm_ass’: app_ccch_scan.c:315:39: warning: unused variable ‘ra’ [-Wunused-variable] app_ccch_scan.c:315:24: warning: unused variable ‘chan_req_mask’ [-Wunused-variable] app_ccch_scan.c:315:10: warning: unused variable ‘chan_req_val’ [-Wunused-variable] app_ccch_scan.c: In function ‘fillField’: app_ccch_scan.c:711:17: warning: pointer targets in initialization differ in signedness [-Wpointer-sign] app_ccch_scan.c: In function ‘process_tch_efr’: app_ccch_scan.c:753:2: warning: unknown conversion type character 0x20 in format [-Wformat] app_ccch_scan.c:753:2: warning: unknown conversion type character 0x20 in format [-Wformat] app_ccch_scan.c:778:4: warning: pointer targets in passing argument 1 of ‘tch_deinterleave’ differ in signedness [-Wpointer-sign] app_ccch_scan.c:681:6: note: expected ‘ubit_t *’ but argument is of type ‘sbit_t *’ app_ccch_scan.c:780:4: warning: pointer targets in passing argument 1 of ‘tch_deinterleave’ differ in signedness [-Wpointer-sign] app_ccch_scan.c:681:6: note: expected ‘ubit_t *’ but argument is of type ‘sbit_t *’ app_ccch_scan.c:787:3: warning: implicit declaration of function ‘osmo_conv_decode’ [-Wimplicit-function-declaration] app_ccch_scan.c:732:9: warning: unused variable ‘steal_bit’ [-Wunused-variable] app_ccch_scan.c:731:10: warning: unused variable ‘bursts’ [-Wunused-variable] app_ccch_scan.c:730:21: warning: variable ‘length’ set but not used [-Wunused-but-set-variable] app_ccch_scan.c:730:10: warning: unused variable ‘bid’ [-Wunused-variable] app_ccch_scan.c:730:6: warning: variable ‘ul’ set but not used [-Wunused-but-set-variable] app_ccch_scan.c:729:21: warning: unused variable ‘lch_idx’ [-Wunused-variable] app_ccch_scan.c:729:17: warning: variable ‘tn’ set but not used [-Wunused-but-set-variable] app_ccch_scan.c:729:10: warning: variable ‘cbits’ set but not used [-Wunused-but-set-variable] app_ccch_scan.c:726:10: warning: variable ‘rx_dbm’ set but not used [-Wunused-but-set-variable] app_ccch_scan.c: In function ‘process_tch_fr’: app_ccch_scan.c:862:2: warning: unknown conversion type character 0x20 in format [-Wformat] app_ccch_scan.c:862:2: warning: unknown conversion type character 0x20 in format [-Wformat] app_ccch_scan.c:887:4: warning: pointer targets in passing argument 1 of ‘tch_deinterleave’ differ in signedness [-Wpointer-sign] app_ccch_scan.c:681:6: note: expected ‘ubit_t *’ but argument is of type ‘sbit_t *’ app_ccch_scan.c:889:4: warning: pointer targets in passing argument 1 of ‘tch_deinterleave’ differ in signedness [-Wpointer-sign] app_ccch_scan.c:681:6: note: expected ‘ubit_t *’ but argument is of type ‘sbit_t *’ app_ccch_scan.c:841:89: warning: unused variable ‘EFRAMR’ [-Wunused-variable] app_ccch_scan.c:841:76: warning: unused variable ‘EFRBits’ [-Wunused-variable] app_ccch_scan.c:841:9: warning: unused variable ‘steal_bit’ [-Wunused-variable] app_ccch_scan.c:840:10: warning: unused variable ‘bursts’ [-Wunused-variable] app_ccch_scan.c:839:21: warning: variable ‘length’ set but not used [-Wunused-but-set-variable] app_ccch_scan.c:839:10: warning: unused variable ‘bid’ [-Wunused-variable] app_ccch_scan.c:839:6: warning: variable ‘ul’ set but not used [-Wunused-but-set-variable] app_ccch_scan.c:838:21: warning: unused variable ‘lch_idx’ [-Wunused-variable] app_ccch_scan.c:838:17: warning: variable ‘tn’ set but not used [-Wunused-but-set-variable] app_ccch_scan.c:838:10: warning: variable ‘cbits’ set but not used [-Wunused-but-set-variable] app_ccch_scan.c:835:10: warning: variable ‘rx_dbm’ set but not used [-Wunused-but-set-variable] app_ccch_scan.c: In function ‘local_burst_decode’: app_ccch_scan.c:1049:29: error: ‘struct gsm48_ass_cmd’ has no member named ‘chan_mode’ app_ccch_scan.c:1038:40: warning: unused variable ‘ra’ [-Wunused-variable] app_ccch_scan.c:1038:25: warning: unused variable ‘chan_req_mask’ [-Wunused-variable] app_ccch_scan.c:1038:11: warning: unused variable ‘chan_req_val’ [-Wunused-variable] app_ccch_scan.c:1037:11: warning: unused variable ‘ch_type’ [-Wunused-variable] app_ccch_scan.c:943:10: warning: variable ‘rx_dbm’ set but not used [-Wunused-but-set-variable] app_ccch_scan.c: In function ‘ccch_tn_decode’: app_ccch_scan.c:1261:14: warning: assignment makes pointer from integer without a cast [enabled by default] app_ccch_scan.c:1203:17: warning: unused variable ‘lch_idx’ [-Wunused-variable] app_ccch_scan.c:1200:10: warning: variable ‘rx_dbm’ set but not used [-Wunused-but-set-variable] app_ccch_scan.c: In function ‘layer3_rx_burst’: app_ccch_scan.c:1302:10: warning: variable ‘rx_dbm’ set but not used [-Wunused-but-set-variable] app_ccch_scan.c: At top level: app_ccch_scan.c:109:1: warning: ‘gen_filename’ defined but not used [-Wunused-function] make: *** [app_ccch_scan.o] Error 1 Tom

3 2

Same MAKE problem
by tom 20 Dec '14

20 Dec '14

1 0

ccch_scan.c
by tom mc loughlin 12 Dec '14

12 Dec '14

Hi all I am trying to build osmocombb using GwmB7UGK.c file. When I run MAKE I get the following errors. # make CC app_ccch_scan.o app_ccch_scan.c:74:1: warning: useless storage class specifier in empty declaration [enabled by default] app_ccch_scan.c:79:1: warning: useless storage class specifier in empty declaration [enabled by default] app_ccch_scan.c: In function ‘dump_bcch’: app_ccch_scan.c:213:29: error: ‘CCCH_MODE_NON_COMBINED2’ undeclared (first use in this function) app_ccch_scan.c:213:29: note: each undeclared identifier is reported only once for each function it appears in app_ccch_scan.c:216:29: error: ‘CCCH_MODE_NON_COMBINED4’ undeclared (first use in this function) app_ccch_scan.c:219:29: error: ‘CCCH_MODE_NON_COMBINED6’ undeclared (first use in this function) app_ccch_scan.c: In function ‘gsm48_rx_imm_ass’: app_ccch_scan.c:315:39: warning: unused variable ‘ra’ [-Wunused-variable] app_ccch_scan.c:315:24: warning: unused variable ‘chan_req_mask’ [-Wunused-variable] app_ccch_scan.c:315:10: warning: unused variable ‘chan_req_val’ [-Wunused-variable] app_ccch_scan.c: In function ‘fillField’: app_ccch_scan.c:711:17: warning: pointer targets in initialization differ in signedness [-Wpointer-sign] app_ccch_scan.c: In function ‘process_tch_efr’: app_ccch_scan.c:753:2: warning: unknown conversion type character 0x20 in format [-Wformat] app_ccch_scan.c:753:2: warning: unknown conversion type character 0x20 in format [-Wformat] app_ccch_scan.c:778:4: warning: pointer targets in passing argument 1 of ‘tch_deinterleave’ differ in signedness [-Wpointer-sign] app_ccch_scan.c:681:6: note: expected ‘ubit_t *’ but argument is of type ‘sbit_t *’ app_ccch_scan.c:780:4: warning: pointer targets in passing argument 1 of ‘tch_deinterleave’ differ in signedness [-Wpointer-sign] app_ccch_scan.c:681:6: note: expected ‘ubit_t *’ but argument is of type ‘sbit_t *’ app_ccch_scan.c:787:3: warning: implicit declaration of function ‘osmo_conv_decode’ [-Wimplicit-function-declaration] app_ccch_scan.c:732:9: warning: unused variable ‘steal_bit’ [-Wunused-variable] app_ccch_scan.c:731:10: warning: unused variable ‘bursts’ [-Wunused-variable] app_ccch_scan.c:730:21: warning: variable ‘length’ set but not used [-Wunused-but-set-variable] app_ccch_scan.c:730:10: warning: unused variable ‘bid’ [-Wunused-variable] app_ccch_scan.c:730:6: warning: variable ‘ul’ set but not used [-Wunused-but-set-variable] app_ccch_scan.c:729:21: warning: unused variable ‘lch_idx’ [-Wunused-variable] app_ccch_scan.c:729:17: warning: variable ‘tn’ set but not used [-Wunused-but-set-variable] app_ccch_scan.c:729:10: warning: variable ‘cbits’ set but not used [-Wunused-but-set-variable] app_ccch_scan.c:726:10: warning: variable ‘rx_dbm’ set but not used [-Wunused-but-set-variable] app_ccch_scan.c: In function ‘process_tch_fr’: app_ccch_scan.c:862:2: warning: unknown conversion type character 0x20 in format [-Wformat] app_ccch_scan.c:862:2: warning: unknown conversion type character 0x20 in format [-Wformat] app_ccch_scan.c:887:4: warning: pointer targets in passing argument 1 of ‘tch_deinterleave’ differ in signedness [-Wpointer-sign] app_ccch_scan.c:681:6: note: expected ‘ubit_t *’ but argument is of type ‘sbit_t *’ app_ccch_scan.c:889:4: warning: pointer targets in passing argument 1 of ‘tch_deinterleave’ differ in signedness [-Wpointer-sign] app_ccch_scan.c:681:6: note: expected ‘ubit_t *’ but argument is of type ‘sbit_t *’ app_ccch_scan.c:841:89: warning: unused variable ‘EFRAMR’ [-Wunused-variable] app_ccch_scan.c:841:76: warning: unused variable ‘EFRBits’ [-Wunused-variable] app_ccch_scan.c:841:9: warning: unused variable ‘steal_bit’ [-Wunused-variable] app_ccch_scan.c:840:10: warning: unused variable ‘bursts’ [-Wunused-variable] app_ccch_scan.c:839:21: warning: variable ‘length’ set but not used [-Wunused-but-set-variable] app_ccch_scan.c:839:10: warning: unused variable ‘bid’ [-Wunused-variable] app_ccch_scan.c:839:6: warning: variable ‘ul’ set but not used [-Wunused-but-set-variable] app_ccch_scan.c:838:21: warning: unused variable ‘lch_idx’ [-Wunused-variable] app_ccch_scan.c:838:17: warning: variable ‘tn’ set but not used [-Wunused-but-set-variable] app_ccch_scan.c:838:10: warning: variable ‘cbits’ set but not used [-Wunused-but-set-variable] app_ccch_scan.c:835:10: warning: variable ‘rx_dbm’ set but not used [-Wunused-but-set-variable] app_ccch_scan.c: In function ‘local_burst_decode’: app_ccch_scan.c:1049:29: error: ‘struct gsm48_ass_cmd’ has no member named ‘chan_mode’ app_ccch_scan.c:1038:40: warning: unused variable ‘ra’ [-Wunused-variable] app_ccch_scan.c:1038:25: warning: unused variable ‘chan_req_mask’ [-Wunused-variable] app_ccch_scan.c:1038:11: warning: unused variable ‘chan_req_val’ [-Wunused-variable] app_ccch_scan.c:1037:11: warning: unused variable ‘ch_type’ [-Wunused-variable] app_ccch_scan.c:943:10: warning: variable ‘rx_dbm’ set but not used [-Wunused-but-set-variable] app_ccch_scan.c: In function ‘ccch_tn_decode’: app_ccch_scan.c:1261:14: warning: assignment makes pointer from integer without a cast [enabled by default] app_ccch_scan.c:1203:17: warning: unused variable ‘lch_idx’ [-Wunused-variable] app_ccch_scan.c:1200:10: warning: variable ‘rx_dbm’ set but not used [-Wunused-but-set-variable] app_ccch_scan.c: In function ‘layer3_rx_burst’: app_ccch_scan.c:1302:10: warning: variable ‘rx_dbm’ set but not used [-Wunused-but-set-variable] app_ccch_scan.c: At top level: app_ccch_scan.c:109:1: warning: ‘gen_filename’ defined but not used [-Wunused-function] make: *** [app_ccch_scan.o] Error 1 Tom

1 0

Wireshark values of Signal level and SNR different from terminal (layer 1,2 &3) output values
by Patrick 30 Nov '14

30 Nov '14

I have been noticing from quite a while that the values of Signal level and SNR embedded in GSM header (GSMTAP) in wireshark (b/w 0-255) are different from that visible on the terminal while layer 1 and layer 2 & 3 are operating (something like -60 dBm and 60 dB respectively). Can anybody plz explain why is that difference if both these values represent the same meaning? Is that due to different definations of int8_t and int in GSMTAP.h and gsm48_rr.c respectively. If yes how to convert these values to dBm as shown in terminal? <http://baseband-devel.722152.n3.nabble.com/file/n4026711/sample10_layer23_d…> -- View this message in context: http://baseband-devel.722152.n3.nabble.com/Wireshark-values-of-Signal-level… Sent from the baseband-devel mailing list archive at Nabble.com.

1 0

Send a packet between phones without BSS?
by rodarima＠gmail.com 28 Nov '14

28 Nov '14

Hello. In my phone specs says that it support: UMTS/HSDPA/HSUPA (850, 900, 1900, 2100 MHz). At the wikipedia, I can read: Uplink Downlink GSM-850 824.2 – 849.2 869.2 - 894.2 GSM 900: ------------------------------------------------ P-GSM 900 890,0 - 915,0 935,0 - 960,0 E-GSM 900 880,0 - 890,0 925,0 - 935,0 R-GSM 900 876,0 - 880,0 921,0 - 925,0 GSM1900: ------------------------------------------------ GSM 1900 1850,0 - 1910,0 1930,0 - 1990,0 More clearly(?): MHZ 1111111111 88888888888888888888999999999999999999990000000000 00112233445566778899001122334455667788990123456789 BAND: 05050505050505050505050505050505050505050505050505 GSM-850 : -----^^^^^----vvvvvv------------------------------ P-GSM 900: ------------------^^^^^^---vvvvvv----------------- E-GSM 900: ----------------^^^------vvv---------------------- R-GSM 900: ---------------^^-------vv------------------------ (^) means uplink, (v) downlink. Posible overlap between bands: SRC Band From To DST Band Hole size P-GSM 900 ----(890.0 - 894.2)---> GSM-850 | 4.2 MHZ E-GSM 900 ----(880.0 - 894.2)---> GSM-850 | 14.2 MHZ R-GSM 900 ----(876.0 - 880.0)---> GSM-850 | 4.0 MHZ Can a phone, with a modified baseband firmware, transmit data to another phone directly, without BSS? Or are there any hardware limitation? From https://gnuradio.org/redmine/attachments/115/all_gsm_channels_arfcn.txt Source channel: Channel: 0; Band: EGSM-900 Uplink: 890 MHz, Downlink: 935 MHz Channel: 1; Band: GSM-900 Uplink: 890.2 MHz, Downlink: 935.2 MHz ... Channel: 20; Band: GSM-900 Uplink: 894 MHz, Downlink: 939 MHz Channel: 21; Band: GSM-900 Uplink: 894.2 MHz, Downlink: 939.2 MHz Destination channel: Channel: 232; Band: GSM-850 Uplink: 845 MHz, Downlink: 890 MHz Channel: 233; Band: GSM-850 Uplink: 845.2 MHz, Downlink: 890.2 MHz ... Channel: 250; Band: GSM-850 Uplink: 848.6 MHz, Downlink: 893.6 MHz Channel: 251; Band: GSM-850 Uplink: 848.8 MHz, Downlink: 893.8 MHz For example using a phone on channel 0 (GSM-900 band) to send a packet to a phone on channel 232 (GSM-850 band), using 890 MHz common frecuency. I could't get any useful info about that. Greetings. Rodrigo.

1 0

Location update problems on Motorola C118
by Maciej Grela 12 Nov '14

12 Nov '14

Hi, I'm trying to run the latest osmocom-bb git on a Motorola C118 phone. After a minor problem with the build (as you may've noticed in the patch I've sent). I got to the point of successfuly running layer1 on the phone and the mobile app on the PC (I have also enabled TX). The process seems to be stuck on trying to perform a location update. The status of the ms is always either: show ms MS '1' is up, MM connection active IMEI: 000000000000000 IMEISV: 0000000000000000 IMEI generation: fixed automatic network selection state: A1 trying RPLMN MCC=104 MNC=002 (104, 002) cell selection state: connected mode 1 ARFCN=19 MCC=104 MNC=002 LAC=0xb00f CELLID=0x4fd9 (104, 002) radio ressource layer state: connection pending mobility management layer state: wait for RR connection (location updating) OsmocomBB> or show ms MS '1' is up, service is limited (pending) IMEI: 000000000000000 IMEISV: 0000000000000000 IMEI generation: fixed automatic network selection state: A1 trying RPLMN MCC=104 MNC=002 (104, 002) cell selection state: C3 camped normally ARFCN=19 MCC=104 MNC=002 LAC=0xb00f CELLID=0x4fd9 (104, 002) radio ressource layer state: idle mobility management layer state: MM idle, attempting to update OsmocomBB> I think, that because of this I can't make any calls or send sms (all the requests are being rejected): OsmocomBB# call 1 <X> call 1 <X> OsmocomBB# % (MS 1) % Call has been rejected The log information from mobile when it's trying to do a location update is show below: <000b> gsm48_rr.c:2174 PAGING REQUEST 1 <000b> gsm48_rr.c:2141 IMSI 260021964220249 (not for us) <000b> gsm48_rr.c:2132 TMSI fd82a501 (not for us) <000e> gsm48_mm.c:344 Location update retry <0005> gsm48_mm.c:345 timer T3211 (loc. upd. retry delay) has fired <0005> gsm48_mm.c:4311 (ms 1) Received 'MM_EVENT_TIMEOUT_T3211' event in state MM IDLE, attempting to update <000e> gsm48_mm.c:2199 Perform location update (MCC 104, MNC 002 LAC 0xb00f) <0005> gsm48_mm.c:2333 LOCATION UPDATING REQUEST <0005> gsm48_mm.c:2355 using LAI (mcc 104 mnc 002 lac 0xb00f) <0005> gsm48_mm.c:2363 using TMSI 0x28a3d62e <0005> gsm48_mm.c:914 new state MM IDLE, attempting to update -> wait for RR connection (location updating) <0001> gsm48_rr.c:5428 (ms 1) Message 'RR_EST_REQ' received in state idle (sapi 0) <000e> gsm48_rr.c:1318 Establish radio link due to mobility management request <0003> gsm322.c:4037 (ms 1) Event 'EVENT_LEAVE_IDLE' for Cell selection in state 'C3 camped normally' <0003> gsm322.c:823 new state 'C3 camped normally' -> 'connected mode 1' <0003> gsm322.c:3653 Going to camping (normal) ARFCN 19. <0003> gsm322.c:463 Sync to ARFCN=19 rxlev=-74 (Sysinfo, ccch mode NON-COMB) <0001> gsm48_rr.c:366 new state idle -> connection pending <0001> gsm48_rr.c:1465 CHANNEL REQUEST: 00 (Location Update with NECI) <0003> gsm322.c:2938 Channel synched. (ARFCN=19, snr=16, BSIC=17) <0001> gsm322.c:2959 using DSC of 90 <0003> gsm48_rr.c:4816 Channel provides data. <0001> gsm48_rr.c:1601 RANDOM ACCESS (requests left 5) <0001> gsm48_rr.c:1658 RANDOM ACCESS (Tx-integer 50 combined no S(lots) 0 ra 0x0e) <0001> gsm48_rr.c:1697 Use MS-TXPWR-MAX-CCH power value 5 (33 dBm) <0001> gsm48_rr.c:2170 PAGING ignored, we are not camping. <0001> gsm48_rr.c:1601 RANDOM ACCESS (requests left 4) <0001> gsm48_rr.c:1658 RANDOM ACCESS (Tx-integer 50 combined no S(lots) 55 ra 0x07) <0001> gsm48_rr.c:1697 Use MS-TXPWR-MAX-CCH power value 5 (33 dBm) <0001> gsm48_rr.c:2450 IMMEDIATE ASSIGNMENT: <0001> gsm48_rr.c:2462 (ta 2/1107m ra 0x75 chan_nr 0x0a MAIO 0 HSN 38 TS 2 SS 0 TSC 0) <0001> gsm48_rr.c:2503 Request, but not for us. <0001> gsm48_rr.c:2450 IMMEDIATE ASSIGNMENT: <0001> gsm48_rr.c:2462 (ta 2/1107m ra 0x75 chan_nr 0x0a MAIO 0 HSN 38 TS 2 SS 0 TSC 0) <0001> gsm48_rr.c:2503 Request, but not for us. <0001> gsm48_rr.c:2170 PAGING ignored, we are not camping. <0001> gsm48_rr.c:2170 PAGING ignored, we are not camping. <0001> gsm48_rr.c:673 MON: f=19 lev=-78 snr= 0 ber= 0 LAI=104 002 b00f ID=4fd9 <0001> gsm48_rr.c:2170 PAGING ignored, we are not camping. <0001> gsm48_rr.c:1601 RANDOM ACCESS (requests left 3) <0001> gsm48_rr.c:1658 RANDOM ACCESS (Tx-integer 50 combined no S(lots) 55 ra 0x0f) <0001> gsm48_rr.c:1697 Use MS-TXPWR-MAX-CCH power value 5 (33 dBm) <0001> gsm48_rr.c:2170 PAGING ignored, we are not camping. <0001> gsm48_rr.c:1601 RANDOM ACCESS (requests left 2) <0001> gsm48_rr.c:1658 RANDOM ACCESS (Tx-integer 50 combined no S(lots) 55 ra 0x01) <0001> gsm48_rr.c:1697 Use MS-TXPWR-MAX-CCH power value 5 (33 dBm) <0001> gsm48_rr.c:2450 IMMEDIATE ASSIGNMENT: <0001> gsm48_rr.c:2473 (ta 1/553m ra 0x18 chan_nr 0x59 ARFCN 19 TS 1 SS 3 TSC 1) <0001> gsm48_rr.c:2503 Request, but not for us. <0001> gsm48_rr.c:2450 IMMEDIATE ASSIGNMENT: <0001> gsm48_rr.c:2473 (ta 1/553m ra 0x18 chan_nr 0x59 ARFCN 19 TS 1 SS 3 TSC 1) <0001> gsm48_rr.c:2503 Request, but not for us. <0001> gsm48_rr.c:2170 PAGING ignored, we are not camping. <0001> gsm48_rr.c:1601 RANDOM ACCESS (requests left 1) <0001> gsm48_rr.c:1658 RANDOM ACCESS (Tx-integer 50 combined no S(lots) 55 ra 0x0a) <0001> gsm48_rr.c:1697 Use MS-TXPWR-MAX-CCH power value 5 (33 dBm) <0001> gsm48_rr.c:2170 PAGING ignored, we are not camping. <0001> gsm48_rr.c:2170 PAGING ignored, we are not camping. <0001> gsm48_rr.c:673 MON: f=19 lev=-78 snr= 0 ber= 1 LAI=104 002 b00f ID=4fd9 <0001> gsm48_rr.c:2170 PAGING ignored, we are not camping. <0001> gsm48_rr.c:1601 RANDOM ACCESS (requests left 0) <0001> gsm48_rr.c:1605 Done with sending RANDOM ACCESS bursts <0001> gsm48_rr.c:836 starting T3126 with 5.000 seconds <0001> gsm48_rr.c:2170 PAGING ignored, we are not camping. <0001> gsm48_rr.c:2225 PAGING ignored, we are not camping. <0001> gsm48_rr.c:2170 PAGING ignored, we are not camping. <0001> gsm48_rr.c:2170 PAGING ignored, we are not camping. <0001> gsm48_rr.c:2170 PAGING ignored, we are not camping. <0001> gsm48_rr.c:2170 PAGING ignored, we are not camping. <0001> gsm48_rr.c:673 MON: f=19 lev=-78 snr= 0 ber= 0 LAI=104 002 b00f ID=4fd9 <0001> gsm48_rr.c:2450 IMMEDIATE ASSIGNMENT: <0001> gsm48_rr.c:2473 (ta 2/1107m ra 0x0a chan_nr 0x41 ARFCN 19 TS 1 SS 0 TSC 1) <0001> gsm48_rr.c:2393 request 0a matches but not frame number (IMM.ASS fn=22,6,30 != RACH fn=22,5,25) <0001> gsm48_rr.c:2503 Request, but not for us. <0001> gsm48_rr.c:2170 PAGING ignored, we are not camping. <0001> gsm48_rr.c:2170 PAGING ignored, we are not camping. <0001> gsm48_rr.c:2170 PAGING ignored, we are not camping. <0001> gsm48_rr.c:2450 IMMEDIATE ASSIGNMENT: <0001> gsm48_rr.c:2473 (ta 2/1107m ra 0x05 chan_nr 0x49 ARFCN 19 TS 1 SS 1 TSC 1) <0001> gsm48_rr.c:2503 Request, but not for us. <0001> gsm48_rr.c:2450 IMMEDIATE ASSIGNMENT: <0001> gsm48_rr.c:2473 (ta 2/1107m ra 0x05 chan_nr 0x49 ARFCN 19 TS 1 SS 1 TSC 1) <0001> gsm48_rr.c:2503 Request, but not for us. <0001> gsm48_rr.c:2225 PAGING ignored, we are not camping. <0001> gsm48_rr.c:2170 PAGING ignored, we are not camping. <0001> gsm48_rr.c:2170 PAGING ignored, we are not camping. <0001> gsm48_rr.c:673 MON: f=19 lev=-77 snr= 0 ber= 6 LAI=104 002 b00f ID=4fd9 <0001> gsm48_rr.c:2170 PAGING ignored, we are not camping. <0001> gsm48_rr.c:2170 PAGING ignored, we are not camping. <0001> gsm48_rr.c:2170 PAGING ignored, we are not camping. <0001> gsm48_rr.c:2450 IMMEDIATE ASSIGNMENT: <0001> gsm48_rr.c:2473 (ta 2/1107m ra 0x00 chan_nr 0x61 ARFCN 19 TS 1 SS 4 TSC 1) <0001> gsm48_rr.c:2503 Request, but not for us. <0001> gsm48_rr.c:2450 IMMEDIATE ASSIGNMENT: <0001> gsm48_rr.c:2473 (ta 2/1107m ra 0x00 chan_nr 0x61 ARFCN 19 TS 1 SS 4 TSC 1) <0001> gsm48_rr.c:2503 Request, but not for us. <0001> gsm48_rr.c:2450 IMMEDIATE ASSIGNMENT: <0001> gsm48_rr.c:2462 (ta 2/1107m ra 0x7d chan_nr 0x0b MAIO 0 HSN 38 TS 3 SS 0 TSC 0) <0001> gsm48_rr.c:2503 Request, but not for us. <0001> gsm48_rr.c:2170 PAGING ignored, we are not camping. <0001> gsm48_rr.c:2450 IMMEDIATE ASSIGNMENT: <0001> gsm48_rr.c:2462 (ta 2/1107m ra 0x7d chan_nr 0x0b MAIO 0 HSN 38 TS 3 SS 0 TSC 0) <0001> gsm48_rr.c:2503 Request, but not for us. <0001> gsm48_rr.c:2170 PAGING ignored, we are not camping. <0001> gsm48_rr.c:2170 PAGING ignored, we are not camping. <0001> gsm48_rr.c:2170 PAGING ignored, we are not camping. <0001> gsm48_rr.c:2170 PAGING ignored, we are not camping. <0001> gsm48_rr.c:673 MON: f=19 lev=-78 snr= 0 ber= 0 LAI=104 002 b00f ID=4fd9 <0001> gsm48_rr.c:2170 PAGING ignored, we are not camping. <0001> gsm48_rr.c:2170 PAGING ignored, we are not camping. <0001> gsm48_rr.c:2225 PAGING ignored, we are not camping. <0001> gsm48_rr.c:2170 PAGING ignored, we are not camping. <0001> gsm48_rr.c:2170 PAGING ignored, we are not camping. <0001> gsm48_rr.c:2170 PAGING ignored, we are not camping. <0001> gsm48_rr.c:2170 PAGING ignored, we are not camping. <0001> gsm48_rr.c:2225 PAGING ignored, we are not camping. <0001> gsm48_rr.c:2170 PAGING ignored, we are not camping. <0001> gsm48_rr.c:2170 PAGING ignored, we are not camping. <0001> gsm48_rr.c:673 MON: f=19 lev=-78 snr= 0 ber= 3 LAI=104 002 b00f ID=4fd9 <0001> gsm48_rr.c:2170 PAGING ignored, we are not camping. <0001> gsm48_rr.c:2170 PAGING ignored, we are not camping. <0001> gsm48_rr.c:2170 PAGING ignored, we are not camping. <0001> gsm48_rr.c:2170 PAGING ignored, we are not camping. <0001> gsm48_rr.c:2170 PAGING ignored, we are not camping. <0001> gsm48_rr.c:2170 PAGING ignored, we are not camping. <0001> gsm48_rr.c:2170 PAGING ignored, we are not camping. <0001> gsm48_rr.c:2170 PAGING ignored, we are not camping. <0001> gsm48_rr.c:2170 PAGING ignored, we are not camping. <0001> gsm48_rr.c:2450 IMMEDIATE ASSIGNMENT: <0001> gsm48_rr.c:2462 (ta 2/1107m ra 0x77 chan_nr 0x09 MAIO 0 HSN 38 TS 1 SS 0 TSC 0) <0001> gsm48_rr.c:2503 Request, but not for us. <0001> gsm48_rr.c:2450 IMMEDIATE ASSIGNMENT: <0001> gsm48_rr.c:2462 (ta 2/1107m ra 0x77 chan_nr 0x09 MAIO 0 HSN 38 TS 1 SS 0 TSC 0) <0001> gsm48_rr.c:2503 Request, but not for us. <0001> gsm48_rr.c:2225 PAGING ignored, we are not camping. <0001> gsm48_rr.c:2170 PAGING ignored, we are not camping. <0001> gsm48_rr.c:673 MON: f=19 lev=-78 snr= 0 ber= 6 LAI=104 002 b00f ID=4fd9 <0001> gsm48_rr.c:765 timer T3126 has fired <000e> gsm48_rr.c:770 Requesting channel failed <0001> gsm48_rr.c:366 new state connection pending -> idle <0003> gsm322.c:4037 (ms 1) Event 'EVENT_RET_IDLE' for Cell selection in state 'connected mode 1' <0003> gsm322.c:3565 Selecting ARFCN 19. after LOC.UPD. <0003> gsm322.c:463 Sync to ARFCN=19 rxlev=-74 (Sysinfo, ccch mode NON-COMB) <0003> gsm322.c:823 new state 'connected mode 1' -> 'C3 camped normally' <0005> gsm48_mm.c:3902 (ms 1) Received 'RR_REL_IND' from RR in state wait for RR connection (location updating) (sapi 0) <0005> gsm48_mm.c:2732 RR link released after loc. upd. <000e> gsm48_mm.c:2676 Location update failed <000e> gsm48_mm.c:2686 Try location update later <0005> gsm48_mm.c:2688 Loc. upd. failed, retry #0 <0005> gsm48_mm.c:413 starting T3211 (loc. upd. retry delay) with 15.0 seconds <0005> gsm48_mm.c:1143 We are camping normally as returning to MM IDLE <0005> gsm48_mm.c:1159 Loc. upd. allowed. <0005> gsm48_mm.c:919 new state wait for RR connection (location updating) -> MM IDLE, location updating needed <0005> gsm48_mm.c:909 new MM IDLE state location updating needed -> attempting to update <0005> gsm48_mm.c:2215 Loc. upd. already pending. <0005> gsm48_mm.c:4311 (ms 1) Received 'MM_EVENT_CELL_SELECTED' event in state MM IDLE, attempting to update <0005> gsm48_mm.c:2215 Loc. upd. already pending. <0003> gsm322.c:2938 Channel synched. (ARFCN=19, snr=16, BSIC=17) <0001> gsm322.c:2959 using DSC of 90 Can you provide me any hints on how to debug this ? Why is the location update failing constantly ? Thanks in advance for your help. Best regards, Maciej Grela

6 9

Mobile testing branch
by tom mc loughlin 07 Sep '14

07 Sep '14

Hi all I have built Osmocommbb with testing branch and I want to run Mobile app allowing me to make a call via my local network. All goes well in the build but I am unable to register on my own network while using a genuine network sim. This is output from my compal_e88/layer1.compalram.bin. As you can see all looks good with signal levels fairly ok until this point and then level drops to -138 dbm and there it stays on all chanells. I have tried this with 3 different sims and all is the same. Can someone help? Tom bat_compal_e88_chg_state=0 L1CTL_RESET_REQ: FULL!SIM Request (7): a0 a4 00 00 02 3f 00 SIM Response (2): 9f 20 SIM Request (5): a0 c0 00 00 20 SIM Response (34): 00 00 02 b7 3f 00 01 00 00 00 00 00 13 b3 05 0a 04 00 83 8a 83 8a 00 03 00 00 02 b7 00 00 02 b7 90 00 SIM Request (7): a0 a4 00 00 02 2f e2 SIM Response (2): 9f 0f SIM Request (5): a0 c0 00 00 0f SIM Response (17): 00 00 00 0a 2f e2 04 00 0f 00 ff 01 02 00 00 90 00 SIM Request (5): a0 b0 00 00 0a SIM Response (12): 98 53 03 11 02 08 22 45 65 f6 90 00 SIM Request (7): a0 a4 00 00 02 7f 20 SIM Response (2): 9f 20 SIM Request (5): a0 c0 00 00 20 SIM Response (34): 00 00 00 00 7f 20 02 00 00 00 00 00 13 b3 00 23 04 00 83 8a 83 8a 00 03 00 00 02 b7 00 00 00 00 90 00 SIM Request (7): a0 a4 00 00 02 6f 07 SIM Response (2): 9f 0f SIM Request (5): a0 c0 00 00 0f SIM Response (17): 00 00 00 09 6f 07 04 00 14 00 14 01 02 00 00 90 00 SIM Request (5): a0 b0 00 00 09 SIM Response (11): 08 29 27 10 17 21 89 26 33 90 00 SIM Request (7): a0 a4 00 00 02 6f 7e SIM Response (2): 9f 0f SIM Request (5): a0 c0 00 00 0f SIM Response (17): 00 00 00 0b 6f 7e 04 00 11 00 14 01 02 00 00 90 00 SIM Request (5): a0 b0 00 00 0b SIM Response (13): ff ff ff ff 72 f2 60 ff fe 00 03 90 00 SIM Request (7): a0 a4 00 00 02 6f 20 SIM Response (2): 9f 0f SIM Request (5): a0 c0 00 00 0f SIM Response (17): 00 00 00 09 6f 20 04 00 11 00 44 01 02 00 00 90 00 SIM Request (5): a0 b0 00 00 09 SIM Response (11): ff ff ff ff ff ff ff ff 07 90 00 SIM Request (7): a0 a4 00 00 02 6f 30 SIM Response (2): 9f 0f SIM Request (5): a0 c0 00 00 0f SIM Response (17): 00 00 01 2c 6f 30 04 00 11 00 44 01 02 00 00 90 00 SIM Request (5): a0 b0 00 00 2c SIM Response (46): 32 f4 51 02 f8 01 12 f4 60 12 f4 10 62 f2 20 02 f4 40 22 f2 01 02 f6 10 22 f8 10 72 f0 77 62 f8 10 42 f0 80 32 f8 10 02 f2 50 32 f2 90 00 BAT-ADC: 593 6 0 0 1023 353 327 277 Charger at 51 mV. PM MEAS: ARFCN=1016, 33 dBm at baseband, -104 dBm at RF PM MEAS: ARFCN=1017, 33 dBm at baseband, -104 dBm at RF PM MEAS: ARFCN=1018, 29 dBm at baseband, -108 dBm at RF PM MEAS: ARFCN=1019, 29 dBm at baseband, -108 dBm at RF PM MEAS: ARFCN=1020, 28 dBm at baseband, -109 dBm at RF PM MEAS: ARFCN=1021, 29 dBm at baseband, -108 dBm at RF PM MEAS: ARFCN=1022, 27 dBm at baseband, -110 dBm at RF PM MEAS: ARFCN=1023, 39 dBm at baseband, -98 dBm at RF L1CTL_RESET_REQ: FULL!L1CTL_FBSB_REQ (arfcn=1, flags=0x7) Starting FCCH RecognitionFB0 (3859:4): TOA= 3792, Power= -88dBm, Angle=-1361Hz DSP Error Status: 256 FB1 (3869:8): TOA= 8751, Power= -88dBm, Angle= -36Hz fn_offset=3867 (fn=3869 + attempt=8 + ntdma = 6) delay=8 (fn_offset=3867 + 11 - fn=3869 - 1 scheduling next FB/SB detection task with delay 8 =>FB @ FNR 3867 fn_offset=3867 qbits=4820 Synchronize_TDMA LOST 3711! DSP Error Status: 256 DSP Error Status: 264 L1CTL_RESET_REQ: FULL!LOST 1893! L1CTL_FBSB_REQ (arfcn=981, flags=0x7) Starting FCCH RecognitionLOST 1857! L1CTL_RESET_REQ: FULL!L1CTL_FBSB_REQ (arfcn=71, flags=0x7) Starting FCCH RecognitionL1CTL_RESET_REQ: FULL!L1CTL_FBSB_REQ (arfcn=993, flags=0x7) Starting FCCH RecognitionL1CTL_RESET_REQ: FULL!LOST 1899! L1CTL_FBSB_REQ (arfcn=979, flags=0x7) Starting FCCH RecognitionLOST 1851! DSP Error Status: 8 L1CTL_RESET_REQ: FULL!L1CTL_FBSB_REQ (arfcn=4, flags=0x7) Starting FCCH RecognitionDSP Error Status: 8 DSP Error Status: 8 DSP Error Status: 8 BAT-ADC: 590 6 0 0 1023 356 330 277 Charger at 51 mV. Battery at 4033 mV. Charging at 0 mA. Battery capacity is 100%. Battery range is 3199..3999 mV. Battery full at 468 LSB .. full at 585 LSB Charging at 239 LSB (204 mA). BCICTL2=0x3ff battery-info.flags=0x00000000 bat_compal_e88_chg_state=0 DSP Error Status: 8 L1CTL_RESET_REQ: FULL!L1CTL_FBSB_REQ (arfcn=1023, flags=0x7) Starting FCCH RecognitionDSP Error Status: 8 DSP Error Status: 8 DSP Error Status: 8 DSP Error Status: 8 L1CTL_RESET_REQ: FULL!LOST 1900! L1CTL_FBSB_REQ (arfcn=980, flags=0x7) Starting FCCH RecognitionLOST 1850! DSP Error Status: 8 DSP Error Status: 8 DSP Error Status: 8 DSP Error Status: 8 L1CTL_RESET_REQ: FULL!L1CTL_FBSB_REQ (arfcn=78, flags=0x7) Starting FCCH RecognitionDSP Error Status: 8 DSP Error Status: 8 DSP Error Status: 8 DSP Error Status: 8 L1CTL_RESET_REQ: FULL!L1CTL_FBSB_REQ (arfcn=53, flags=0x7) LOST 1880! Starting FCCH RecognitionLOST 1870! DSP Error Status: 8 DSP Error Status: 8 DSP Error Status: 8 DSP Error Status: 8 L1CTL_RESET_REQ: FULL!L1CTL_FBSB_REQ (arfcn=69, flags=0x7) Starting FCCH RecognitionDSP Error Status: 8 DSP Error Status: 8 DSP Error Status: 8 DSP Error Status: 8 L1CTL_RESET_REQ: FULL!L1CTL_FBSB_REQ (arfcn=94, flags=0x7) Starting FCCH RecognitionDSP Error Status: 8 DSP Error Status: 8 DSP Error Status: 8 DSP Error Status: 8 L1CTL_RESET_REQ: FULL!L1CTL_FBSB_REQ (arfcn=57, flags=0x7) Starting FCCH RecognitionDSP Error Status: 8 DSP Error Status: 8 DSP Error Status: 8 DSP Error Status: 8 L1CTL_RESET_REQ: FULL!L1CTL_FBSB_REQ (arfcn=985, flags=0x7) Starting FCCH RecognitionDSP Error Status: 8 DSP Error Status: 8 DSP Error Status: 8 DSP Error Status: 8 L1CTL_RESET_REQ: FULL!L1CTL_FBSB_REQ (arfcn=970, flags=0x7) Starting FCCH RecognitionDSP Error Status: 8 DSP Error Status: 8 DSP Error Status: 8 DSP Error Status: 8 L1CTL_RESET_REQ: FULL!L1CTL_FBSB_REQ (arfcn=45, flags=0x7) Starting FCCH RecognitionDSP Error Status: 8 DSP Error Status: 8 DSP Error Status: 8 DSP Error Status: 8 L1CTL_RESET_REQ: FULL!L1CTL_FBSB_REQ (arfcn=43, flags=0x7) Starting FCCH RecognitionDSP Error Status: 8 DSP Error Status: 8 DSP Error Status: 8 DSP Error Status: 8 L1CTL_RESET_REQ: FULL!L1CTL_FBSB_REQ (arfcn=33, flags=0x7) Starting FCCH RecognitionDSP Error Status: 8 DSP Error Status: 8 DSP Error Status: 8 DSP Error Status: 8 L1CTL_RESET_REQ: FULL!L1CTL_FBSB_REQ (arfcn=7, flags=0x7) Starting FCCH RecognitionDSP Error Status: 8 DSP Error Status: 8 DSP Error Status: 8 DSP Error Status: 8 L1CTL_RESET_REQ: FULL!L1CTL_FBSB_REQ (arfcn=988, flags=0x7) Starting FCCH RecognitionDSP Error Status: 8 DSP Error Status: 8 DSP Error Status: 8 DSP Error Status: 8 L1CTL_RESET_REQ: FULL!L1CTL_FBSB_REQ (arfcn=971, flags=0x7) Starting FCCH RecognitionDSP Error Status: 8 DSP Error Status: 8 DSP Error Status: 8 DSP Error Status: 8 L1CTL_RESET_REQ: FULL!L1CTL_FBSB_REQ (arfcn=969, flags=0x7) Starting FCCH RecognitionDSP Error Status: 8 DSP Error Status: 8 DSP Error Status: 8 DSP Error Status: 8 L1CTL_RESET_REQ: FULL!L1CTL_FBSB_REQ (arfcn=42, flags=0x7) Starting FCCH RecognitionDSP Error Status: 8 DSP Error Status: 8 DSP Error Status: 8 DSP Error Status: 8 L1CTL_RESET_REQ: FULL!L1CTL_FBSB_REQ (arfcn=40, flags=0x7) Starting FCCH RecognitionDSP Error Status: 8 DSP Error Status: 8 DSP Error Status: 8 DSP Error Status: 8 L1CTL_RESET_REQ: FULL!L1CTL_FBSB_REQ (arfcn=32, flags=0x7) Starting FCCH RecognitionDSP Error Status: 8 DSP Error Status: 8 BAT-ADC: 592 6 0 0 1023 353 327 270 Charger at 51 mV. Battery at 4047 mV. Charging at 0 mA. Battery capacity is 100%. Battery range is 3199..3999 mV. Battery full at 468 LSB .. full at 585 LSB Charging at 239 LSB (204 mA). BCICTL2=0x3ff battery-info.flags=0x00000000 bat_compal_e88_chg_state=0 DSP Error Status: 8 DSP Error Status: 8 L1CTL_RESET_REQ: FULL!L1CTL_FBSB_REQ (arfcn=85, flags=0x7) Starting FCCH RecognitionDSP Error Status: 8 DSP Error Status: 8 DSP Error Status: 8 DSP Error Status: 8 L1CTL_RESET_REQ: FULL!L1CTL_FBSB_REQ (arfcn=55, flags=0x7) Starting FCCH RecognitionDSP Error Status: 8 DSP Error Status: 8 DSP Error Status: 8 DSP Error Status: 8 L1CTL_RESET_REQ: FULL!L1CTL_FBSB_REQ (arfcn=47, flags=0x7) Starting FCCH RecognitionDSP Error Status: 8 DSP Error Status: 8 DSP Error Status: 8 DSP Error Status: 8 L1CTL_RESET_REQ: FULL!L1CTL_FBSB_REQ (arfcn=28, flags=0x7) Starting FCCH RecognitionDSP Error Status: 8 DSP Error Status: 8 DSP Error Status: 8 DSP Error Status: 8 L1CTL_RESET_REQ: FULL!L1CTL_FBSB_REQ (arfcn=5, flags=0x7) Starting FCCH RecognitionDSP Error Status: 8 DSP Error Status: 8 DSP Error Status: 8 DSP Error Status: 8 L1CTL_RESET_REQ: FULL!L1CTL_PM_REQ start=0 end=124 DSP Error Status: 8 PM MEAS: ARFCN=0, 0 dBm at baseband, -138 dBm at RF DSP Error Status: 8 PM MEAS: ARFCN=1, 0 dBm at baseband, -138 dBm at RF DSP Error Status: 8 PM MEAS: ARFCN=2, 0 dBm at baseband, -138 dBm at RF DSP Error Status: 8 PM MEAS: ARFCN=3, 0 dBm at baseband, -138 dBm at RF DSP Error Status: 8 PM MEAS: ARFCN=4, 0 dBm at baseband, -138 dBm at RF DSP Error Status: 8 PM MEAS: ARFCN=5, 0 dBm at baseband, -138 dBm at RF DSP Error Status: 8 PM MEAS: ARFCN=6, 0 dBm at baseband, -138 dBm at RF DSP Error Status: 8 PM MEAS: ARFCN=7, 0 dBm at baseband, -138 dBm at RF DSP Error Status: 8 PM MEAS: ARFCN=8, 0 dBm at baseband, -138 dBm at RF DSP Error Status: 8 PM MEAS: ARFCN=9, 0 dBm at baseband, -138 dBm at RF DSP Error Status: 8 PM MEAS: ARFCN=10, 0 dBm at baseband, -138 dBm at RF DSP Error Status: 8 PM MEAS: ARFCN=11, 0 dBm at baseband, -138 dBm at RF DSP Error Status: 8 PM MEAS: ARFCN=12, 0 dBm at baseband, -138 dBm at RF DSP Error Status: 8 PM MEAS: ARFCN=13, 0 dBm at baseband, -138 dBm at RF DSP Error Status: 8 PM MEAS: ARFCN=14, 0 dBm at baseband, -138 dBm at RF DSP Error Status: 8 PM MEAS: ARFCN=15, 0 dBm at baseband, -138 dBm at RF DSP Error Status: 8 PM MEAS: ARFCN=16, 0 dBm at baseband, -138 dBm at RF DSP Error Status: 8 PM MEAS: ARFCN=17, 0 dBm at baseband, -138 dBm at RF DSP Error Status: 8 PM MEAS: ARFCN=18, 0 dBm at baseband, -138 dBm at RF DSP Error Status: 8 PM MEAS: ARFCN=19, 0 dBm at baseband, -138 dBm at RF DSP Error Status: 8 PM MEAS: ARFCN=20, 0 dBm at baseband, -138 dBm at RF DSP Error Status: 8 PM MEAS: ARFCN=21, 0 dBm at baseband, -138 dBm at RF DSP Error Status: 8 PM MEAS: ARFCN=22, 0 dBm at baseband, -138 dBm at RF DSP Error Status: 8 PM MEAS: ARFCN=23, 0 dBm at baseband, -138 dBm at RF DSP Error Status: 8 PM MEAS: ARFCN=24, 0 dBm at baseband, -138 dBm at RF DSP Error Status: 8 PM MEAS: ARFCN=25, 0 dBm at baseband, -138 dBm at RF DSP Error Status: 8 PM MEAS: ARFCN=26, 0 dBm at baseband, -138 dBm at RF DSP Error Status: 8 PM MEAS: ARFCN=27, 0 dBm at baseband, -138 dBm at RF DSP Error Status: 8 PM MEAS: ARFCN=28, 0 dBm at baseband, -138 dBm at RF DSP Error Status: 8 PM MEAS: ARFCN=29, 0 dBm at baseband, -138 dBm at RF DSP Error Status: 8

5 7

pirelli dp-l10 unexpectable stuck
by TSAREGORODTSEV, Yury 04 Sep '14

04 Sep '14

Hi guys, pirelli dp-l10 unexpectable stuck running osmocombb + mobile (master branch) its connected directly to DC power supply, so issue not related to battery. In osmocon, mobile debugs nothing particilular everything worked fine and just in one moment stuck even without any actions, just in idle mode. Anyone got some issues? Any suggestions? Yury

1 0

Jump to page:

2026

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

baseband-devel