Hello! I Need Help
I install these three programs OpenBTS, OsmocomBB, Asterisk
Then run them, Everything works well
OpenBTS sent an SMS to my phones
I answered and he checked me
I registered into OpenBTS a second phone
I tried to transfer SMS between phones - all good
but when I try to call from one to another I did not get
Asterisk writes
================================================================
*CLI> Retransmission timeout reached on transmission 755803415(a)127.0.0.1 for
seqno 179 (Critical Response) -- See
wiki.asterisk.org/wiki/display/AST/SIP+Retransmissions
Packet timed out after 32001ms with no response
================================================================
Why?
What do I do?
--
View this message in context: http://baseband-devel.722152.n3.nabble.com/OpenBTS-OsmocomBB-Asterisk-tp402…
Sent from the baseband-devel mailing list archive at Nabble.com.
Hey there, I bumped into this error when testing gprsdecode from srldabs.de When I try the sample .dat files provided from srlabs.de it works fine though. Any hints?
Kind Regards
George AndguladzeSenior Software EngineerBusiness Management Technology
www.bmt.ge
Hey, I finally watched Nico's talk "let me answer that for you" and heard him say he ported layer2/3 to target.
Also found a mailing list message about him cleaning it up and putting it up on git and sending it to a few folks.
Did that code ever get shared? Would be cool to play around with and is certainly something I would eventually want to accomplish for my project of making a phone that works by itself.
-Craig
Dear all, I vae the C115 with a T1 USB to Serial cable with the Prolific
chipset.
When i run osmocon i get :- an its just sits there with no further
processing.
./osmocon -p /dev/ttyUSB0 -m c123xor
../../target/firmware/board/compal_e88/loader.compalram.bin
read_file(../../target/firmware/board/compal_e88/loader.compalram.bin):
file_size=17120, hdr_len=4, dnload_len=17127
read_file(../../target/firmware/board/compal_e88/loader.compalram.bin):
file_size=17120, hdr_len=4, dnload_len=17127
got 1 bytes from modem, data looks like: 00 .
got 2 bytes from modem, data looks like: 2f 00 /.
got 1 bytes from modem, data looks like: 1b .
got 3 bytes from modem, data looks like: f6 02 00 ...
got 1 bytes from modem, data looks like: 41 A
got 1 bytes from modem, data looks like: 01 .
got 1 bytes from modem, data looks like: 40 @
Received PROMPT1 from phone, responding with CMD
got 1 bytes from modem, data looks like: 66 f
got 1 bytes from modem, data looks like: 74 t
got 1 bytes from modem, data looks like: 6d m
got 1 bytes from modem, data looks like: 74 t
got 1 bytes from modem, data looks like: 6f o
got 1 bytes from modem, data looks like: 6f o
got 1 bytes from modem, data looks like: 6c l
Received FTMTOOL from phone, ramloader has aborted
got 1 bytes from modem, data looks like: 65 e
got 1 bytes from modem, data looks like: 72 r
got 1 bytes from modem, data looks like: 72 r
got 1 bytes from modem, data looks like: 6f o
got 1 bytes from modem, data looks like: 72 r
got 1 bytes from modem, data looks like: 00 .
got 1 bytes from modem, data looks like: 00 .
I think the cable is ok as when i run my fingers on the tip i get random
Zeros so it appears to be talking to the cable.
Also when i tried to run Mobile i get the :- even though i created the
Mobile.cfg file in /etc/osmoco
Failed to parse the config file: '/home/raz/.osmocom/bb/mobile.cfg'
Please check or create config file using: 'touch
/home/raz/.osmocom/bb/mobile.cfg'
I have spent some hours researching the lists and trying various things to
no avail but I want to continue until I resolve this issues and use this
great stack to learn about the GSM network.
Please advise.
Great full for any help or pointers but this maybe a timing issue that is
difficult to debug.
Thanks
Raz
hi,
i did a lot of resarch and testing on cell selection and re-selection
process the last two week.
the cell selection process, network selection process (manual and
automatic) and mobility management process were already implemented in
OsmocomBB a long time, but turned out to be buggy and incomplete. i made
test drives to check the process and debugged it.
the re-selection process is new. it is used to track surrounding cells
while listening to the BCCH of the current cell (camping on a cell).
special extension to the layer1 firmare is used to measure neighbour
cells. if an neighbour cell becomes 'better', the mobile switches to
that cell, depening on different criteria. now it is possible to move
with OsmocomBB.
the re-selection process is not handover! handover is a process where a
phone switches between cells while doing a call. handover is one next
step to implement. the process is a little more complex, because it
requires not only neighbour cell measurements, but also syncing to them
without interrupting the traffic channel. most layer 3 stuff of handover
is already implemented.
if you like to play and test your moving OsmocomBB, you can check out
the "jolly/roaming" branch. it contains the extension to layer1, as well
as sim reader and fixes from "sylvain/testing" branch. use both "mobile"
and "layer1" firmware from this branch.
in order to see some process at VTY, you can do:
enable
monitor network 1 (continously display the strongest cell and neighbour
cells)
show ms 1 (to see current states)
show neighbour-cells 1 (to see a more detailed current list of
neighbours)
andreas
Hi,
in the osmocom bb mobile.cfg I don't see any posibility to set a fixed
Kc encryption key and the tmsi.
How could I achieve that osmocom uses my defined Kc and tmsi?
cheers,
Simian
Hi all,
*I connected, sent and made call successful with osmocombb (with real IMSI
and IMEI).
But, now, I get error, always be rejected:*
OsmocomBB# show ms
MS '1' is up, service is limited
IMEI: 357337016773249
IMEISV: 3573370167732490
IMEI generation: fixed
automatic network selection state: A0 null
cell selection state: PLMN search
radio ressource layer state: idle
mobility management layer state: MM idle, PLMN search
OsmocomBB#
% (MS 1)
% Trying to registering with network...
*in my config file (/root/.osmocom/bb/mobile.cfg)**:*
!
! OsmocomBB () configuration saved from vty
!!
!
line vty
no login
!
gps device /dev/ttyACM0
gps baudrate default
no gps enable
!
no hide-default
!
ms 1
layer2-socket /tmp/osmocom_l2
sap-socket /tmp/osmocom_sap
sim reader
network-selection-mode auto
imei 357337016773249 0
imei-fixed
emergency-imsi 452040399998391
sms-service-center +84980200030
no call-waiting
no auto-answer
no force-rekey
no clip
no clir
tx-power auto
no simulated-delay
no stick
location-updating
neighbour-measurement
codec full-speed prefer
codec half-speed
no abbrev
support
sms
a5/1
a5/2
p-gsm
e-gsm
r-gsm
gsm-850
dcs
pcs
class-900 4
class-850 4
class-dcs 1
class-pcs 1
channel-capability sdcch+tchf+tchh
full-speech-v1
full-speech-v2
half-speech-v1
min-rxlev -106
dsc-max 90
no skip-max-per-band
exit
test-sim
imsi 001010000000000
ki xor 00 00 00 00 00 00 00 00 00 00 00 00
no barred-access
no rplmn
hplmn-search foreign-country
exit
no shutdown
exit
!
Anyone help me???, thanks a lot!
--
Thanks and Best Regards
--
From: Hoàng Mạnh Hùng
Signed-off-by: Max <max.suraev(a)fairwaves.co>
---
debian/README.source | 1 +
debian/control | 17 ++++++++++++++---
debian/copyright | 15 ++-------------
3 files changed, 17 insertions(+), 16 deletions(-)
create mode 100644 debian/README.source
diff --git a/debian/README.source b/debian/README.source
new file mode 100644
index 0000000..982a696
--- /dev/null
+++ b/debian/README.source
@@ -0,0 +1 @@
+We do some Debian-specific source patching magic. See debian/patches for clarification.
diff --git a/debian/control b/debian/control
index 7de6358..1470e73 100644
--- a/debian/control
+++ b/debian/control
@@ -2,7 +2,7 @@ Source: libosmocore
Section: libs
Priority: optional
Maintainer: Harald Welte <laforge(a)gnumonks.org>
-Build-Depends: debhelper (>= 9), autotools-dev, autoconf, automake, libtool, dh-autoreconf, libdpkg-perl, git, doxygen, libpcsclite-dev, pkg-config
+Build-Depends: debhelper (>= 9), autotools-dev, autoconf, automake, libtool, dh-autoreconf, libdpkg-perl, git, doxygen, libpcsclite-dev, pkg-config, quilt
Standards-Version: 3.9.6
Homepage: http://bb.osmocom.org/trac/wiki/libosmocore
Vcs-Git: git://git.osmocom.org/libosmocore.git
@@ -14,6 +14,7 @@ Architecture: any
Depends: libosmocodec0, libosmocore6, libosmogb3, libosmogsm5, libosmovty1, ${misc:Depends}
Multi-Arch: foreign
Description: Open Source MObile COMmunications CORE library
+ Metapackage for Open Source MObile COMmunications CORE library.
Package: libosmocodec0
Section: libs
@@ -21,6 +22,7 @@ Architecture: any
Depends: ${shlibs:Depends}, ${misc:Depends}
Multi-Arch: same
Description: Osmo codec library
+ Open Source MObile COMmunications codec library.
Package: libosmocore6
Section: libs
@@ -28,6 +30,7 @@ Architecture: any
Depends: ${shlibs:Depends}, ${misc:Depends}
Multi-Arch: same
Description: Osmo Core library
+ Open Source MObile COMmunications CORE library.
Package: libosmogb3
Section: libs
@@ -35,6 +38,7 @@ Architecture: any
Depends: ${shlibs:Depends}, ${misc:Depends}
Multi-Arch: same
Description: Osmo GPRS GB library
+ Open Source MObile COMmunications library containing GPRS support functions.
Package: libosmogsm5
Section: libs
@@ -42,6 +46,7 @@ Architecture: any
Depends: ${shlibs:Depends}, ${misc:Depends}
Multi-Arch: same
Description: Osmo GSM utility library
+ Open Source MObile COMmunications library implementing various GSM routines.
Package: libosmovty1
Section: libs
@@ -49,6 +54,7 @@ Architecture: any
Depends: ${shlibs:Depends}, ${misc:Depends}
Multi-Arch: same
Description: Osmo VTY library
+ Open Source MObile COMmunications library implementing VTY interface.
Package: libosmoctrl0
Section: libs
@@ -56,6 +62,7 @@ Architecture: any
Depends: ${shlibs:Depends}, ${misc:Depends}
Multi-Arch: same
Description: Osmo control library
+ Open Source MObile COMmunications control library.
Package: libosmosim0
Section: libs
@@ -63,19 +70,22 @@ Architecture: any
Depends: ${shlibs:Depends}, ${misc:Depends}
Multi-Arch: same
Description: Osmo SIM library
-
+ Open Source MObile COMmunications SIM library.
+
Package: libosmocore-dev
Section: libdevel
Architecture: any
-Depends: ${misc:Depends}, libosmocore
+Depends: ${misc:Depends}, libosmocore, libjs-jquery
Multi-Arch: same
Description: Development headers for Open Source MObile COMmunications CORE library
+ Open Source MObile COMmunications library development files.
Package: libosmocore-utils
Architecture: any
Depends: ${shlibs:Depends}, ${misc:Depends}, libosmocore
Multi-Arch: same
Description: Utilities for gsm
+ Open Source MObile COMmunications library utilities.
Package: libosmocore-dbg
Architecture: any
@@ -84,3 +94,4 @@ Priority: extra
Depends: libosmocore (= ${binary:Version}), ${misc:Depends}
Multi-Arch: same
Description: Debug symbols for Open Source MObile COMmunications CORE library
+ Debug version of Open Source MObile COMmunications CORE library.
diff --git a/debian/copyright b/debian/copyright
index c450be5..c2bfe66 100644
--- a/debian/copyright
+++ b/debian/copyright
@@ -6,7 +6,7 @@ It was downloaded from:
git://git.osmocom.org/libosmocore.git
-Upstream Author(s):
+Upstream Authors:
Harald Welte <laforge(a)gnumonks.org>
Holger Hans Peter Freyther <zecke(a)selfish.org>
@@ -36,19 +36,8 @@ Copyright:
License:
GNU General Public License, Version 2 or later
+ see "/usr/share/common-licenses/GPL-2"
The Debian packaging is:
Copyright (C) 2010 Harald Welte <laforge(a)gnumonks.org>
-
-# Please chose a license for your packaging work. If the program you package
-# uses a mainstream license, using the same license is the safest choice.
-# Please avoid to pick license terms that are more restrictive than the
-# packaged work, as it may make Debian's contributions unacceptable upstream.
-# If you just want it to be GPL version 3, leave the following lines in.
-
-and is licensed under the GPL version 3,
-see "/usr/share/common-licenses/GPL-3".
-
-# Please also look if there are files or directories which have a
-# different copyright/license attached and list them here.
--
2.1.0