baseband-devel

baseband-devel@lists.osmocom.org

2023 discussions

Fwd: Osmocom help
by Kishan Hari 21 Feb '15

21 Feb '15

Hello sir, I'm from India, there is no encryption used, I used rtl sdr. In Kali Linux successfully, but here hopping frequencies are used, so I want to try osmocom, I did some search regarding this,but can you give me instructions in steps to get GSM SMS sir. Regards HARI

1 0

[PATCH] avoid smscb test failure for ppc/ppc64 archi
by Michel Normand 18 Feb '15

18 Feb '15

proposed same patch as already submitted for opensuse at https://build.opensuse.org/request/show/286595 Michel Normand (1): avoid smscb test failure for ppc/ppc64 archi include/osmocom/gsm/protocol/gsm_03_41.h | 37 ++++++++++++++++++++++++++++++ 1 file changed, 37 insertions(+) -- 1.7.9.5

2 2

Mobile app hangs depending on SIM
by francoip 16 Feb '15

16 Feb '15

Hello list, I'm playing with the mobile application of OsmocomBB. I have two SIM cards of two different operators. Everything works fine with one of them, but it doesn't with the other one. Layer1 hangs there: SIM Request (7): a0 a4 00 00 02 6f 30 SIM Response (2): 9f 0f SIM Request (5): a0 c0 00 00 0f SIM Response (17): 00 00 00 f6 6f 30 04 00 11 ff ff 01 02 00 00 90 00 SIM Request (5): a0 b0 00 00 f6 and mobile hangs there: <0005> subscriber.c:600 Requesting SIM file 0x6f30 <000f> sim.c:209 got new job: SIM_JOB_READ_BINARY (handle=00000004) <000f> sim.c:241 SELECT (file=0x6f30) <000f> sim.c:187 sending APDU (class 0xa0, ins 0xa4) <000f> sim.c:876 received APDU (len=0 sw1=0x9f sw2=0x0f) <000f> sim.c:949 command successfull <000f> sim.c:571 GET RESPONSE (len=15) <000f> sim.c:187 sending APDU (class 0xa0, ins 0xc0) <000f> sim.c:876 received APDU (len=15 sw1=0x90 sw2=0x00) <000f> sim.c:949 command successfull <000f> sim.c:1065 selected file (len 246) <000f> sim.c:277 READ BINARY (offset=0 len=246) <000f> sim.c:187 sending APDU (class 0xa0, ins 0xb0) So, as I understand it, it tries to read the PLMN selectors from SIM but does not get any answer and the callback function is not called. Also, when using the command "off", everything shuts down with the first SIM, but I have to use ctrl-c for the second one after mobile hangs here: <000f> sim.c:1234 exit SIM client I have the last versions of libosmocore and osmocom-bb in the master branch, and I enabled TX support. I also tried to set my IMEI in the mobile.cfg file but this does not change anything. The config file is joined as well. Did I forget something? Do you have an idea? Thank you!

1 0

Announcing OsmoDevCon 2015
by Harald Welte 13 Feb '15

13 Feb '15

Dear Osmocom.org project members, I'm happy to be able to announce the annual incarnation of OsmoDevCon. The Date is set for March 27 through 30. Venue: As usual, IN-Berlin e.V. in Berlin, Germany. Further details can be obtained from http://openbsc.osmocom.org/trac/wiki/OsmoDevCon2015 Attendance, as usual, is restricted to people with an active history in the Project by contributions in terms of code, patches, discussions, documentation or in other form. = Registration = If you have wiki access, please add yourself to the #Requested section. Alternatively, you can send me private e-mail about it. After review, your (nick)name will be listed in the #Confirmed section. Looking forward to meeting all of you again soon! -- - Harald Welte <laforge(a)gnumonks.org> http://laforge.gnumonks.org/ ============================================================================ "Privacy in residential applications is a desirable marketing option." (ETSI EN 300 175-7 Ch. A6)

1 0

Mobile app hangs depending on SIM
by francoip 12 Feb '15

12 Feb '15

Hello list, I'm playing with the mobile application of OsmocomBB. I have two SIM cards of two different operators. Everything works fine with one of them, as you can see in the mobile_ok log, but it doesn't with the other one, as you can see in the mobile_ko and layer1_ko log. Layer1 hangs there: SIM Request (5): a0 b0 00 00 f6 and mobile hangs there: <000f> sim.c:1065 selected file (len 246) <000f> sim.c:277 READ BINARY (offset=0 len=246) <000f> sim.c:187 sending APDU (class 0xa0, ins 0xb0) Then nothing happens. Also, when using the command "off", everything shuts down with the first SIM, but I have to use ctrl-c for the second one after mobile hangs here: <000f> sim.c:1234 exit SIM client I have the last versions of libosmocore and osmocom-bb in the master branch, and I enabled TX support. I also tried to set my IMEI in the mobile.cfg file but this does not change anything. The config file is joined as well. Did I forget something? Do you have an idea? Thank you!

1 0

Regarding Mobile Application of Osmocombb . Core Dumped. Ubuntu 14.04
by Sanchit Agarwal 20 Jan '15

20 Jan '15

Hi I have compiled mobile app with tx support . i.e i have checked-out the testing branch . Layer 1 seems to be uploaded to the mobile phone successfully. But the program crashes every-time there is a successful connection with the network service provider. I am attaching my mobile.log and layer1.log file along for debugging. Hoping some one replies. " mmsgb(0x8955b0): Not enough headroom msgb_push (4285966792 < 7) errors Dropping frame with 66 bit errors Dropping frame with 65 bit errors Dropping frame with 58 bit errors Dropping frame with 56 bit errors LOSS counter for CCCH 57 Dropping frame with 66 bit errors Dropping frame with 66 bit errors Dropping frame with 65 bit errors Dropping frame with 65 bit errors Dropping frame with 70 bit errors Dropping frame with 65 bit errors Dropping frame with 80 bit errors LOSS counter for CCCH 53 Dropping frame with 61 bit errors Dropping frame with 76 bit errors Dropping frame with 57 bit errors Dropping frame with 67 bit errors Dropping frame with 58 bit errors Dropping frame with 72 bit errors Dropping frame with 63 bit errors Dropping frame with 70 bit errors LOSS counter for CCCH 49 Dropping frame with 57 bit errors Dropping frame with 61 bit errors Dropping frame with 52 bit errors Dropping frame with 77 bit errors Dropping frame with 60 bit errors Dropping frame with 57 bit errors Dropping frame with 76 bit errors LOSS counter for CCCH 45 Dropping frame with 70 bit errors Dropping frame with 57 bit errors Dropping frame with 65 bit errors Dropping frame with 46 bit errors Dropping frame with 65 bit errors Dropping frame with 46 bit errors Dropping frame with 70 bit errors Dropping frame with 77 bit errors LOSS counter for CCCH 46 Dropping frame with 51 bit errors Dropping frame with 56 bit errors Dropping frame with 65 bit errors Dropping frame with 59 bit errors Dropping frame with 65 bit errors Dropping frame with 60 bit errors Dropping frame with 72 bit errors Dropping frame with 79 bit errors Dropping frame with 75 bit errors Dropping frame with 59 bit errors Dropping frame with 72 bit errors Dropping frame with 66 bit errors Dropping frame with 69 bit errors Dropping frame with 70 bit errors Dropping frame with 65 bit errors Dropping frame with 69 bit errors Dropping frame with 66 bit errors Dropping frame with 82 bit errors Dropping frame with 80 bit errors LOSS counter for CCCH 86 Dropping frame with 67 bit errors Dropping frame with 63 bit errors Dropping frame with 69 bit errors Dropping frame with 69 bit errors Dropping frame with 66 bit errors Dropping frame with 76 bit errors Dropping frame with 63 bit errors LOSS counter for CCCH 87 Dropping frame with 53 bit errors Dropping frame with 54 bit errors LOSS counter for CCCH 88 LOSS counter for CCCH 89 Dropping frame with 46 bit errors Dropping frame with 50 bit errors Dropping frame with 45 bit errors backtrace() returned 10 addresses /usr/local/lib/libosmocore.so.6(osmo_panic+0xbe) [0x7f3ccd0745ce] /usr/local/lib/libosmogsm.so.5(lapdm_phsap_up+0x18e) [0x7f3cccc3cc5e] ./mobile() [0x438c29] ./mobile() [0x4394cc] /usr/local/lib/libosmocore.so.6(osmo_wqueue_bfd_cb+0x73) [0x7f3ccd071b63] /usr/local/lib/libosmocore.so.6(osmo_select_main+0x18f) [0x7f3ccd070b9f] ./mobile() [0x4048bf] /lib/x86_64-linux-gnu/libc.so.6(__libc_start_main+0xf5) [0x7f3ccc679ec5] ./mobile() [0x404a46] " there is core dumped after this error.

1 0

[PATCH] GSMTAP: handling LTE RRC and MAC messages
by altaf sk 18 Jan '15

18 Jan '15

Hello This patch 1. can handle LTE RRC messages and call respective dissectors 2. can handle LTE MAC frames, fill in the struct mac_lte_info and then call the mac-lte dissector. Following the GSMTAP header, there is a 15 byte mac_info which is needed to fill the struct mac_lte_info. The size mac_info need not necessarily be 15 byte. But these 15 bytes are necessary for the lte-mac dissector to understand the frame. 15 byte header is used by the LTE_FDD_EnodeB application from the openLTE project. There is also a patch for gsmtap.h. Please let me know your comments. Cheers Altaf

2 3

ML backup idea
by ☎ 14 Jan '15

14 Jan '15

Hey folks. In a light of latest collapse of mailing list I have a proposal for backup communication channel. It have rather limited capacity and reachability but it's extremely reliable in case of electronic malfunctions. It's called "real-life meeting" ;-) I suggest bi-weekly format, time and place is up to discussion but I'm ok with what it used to be before. We can also have 2-way proposals - some folks can suggest topics they would like to present while others could suggest topics they would like to ask questions on. When enough of those match together - we have a meeting. As a starter - I'd like to ask questions on 1) call forwarding support in OpenBSC 2) BTS emulator. Thought/comments/suggestions? -- best regards, Max, http://fairwaves.co

1 0

everyone got unsubcribed in November 2014?
by Tim Ehlers 08 Jan '15

08 Jan '15

Dear OsmocomBB-list, I just realized that I've been unsubscribed since November 2014 from the baseband-devel list and now I resubscribed today. The Mail-archive seems to start from scratch since these days, too. So I guess, that this is not an individual problem of my email address. What happened (HDD-crash)? Why is that not mentioned on the website? Maybe I am not the last one realizing that? Best Tim

2 1

MOT call/sms problem
by tao shang 04 Jan '15

04 Jan '15

Hi,all: I have got a C118 to test mobile function 1) To get the master branch code and to compile it. 2) To insert simcard(13681******) into the phone and to modify the mobile.cfg to use real simcard. 3) To connect the phone with PC(core i5/ubuntu 12.04). 4) After downloading the firmware, to start the mobile App(#sudo ./mobile 2>&1 | tee > log.txt). 5) I can see that the location update process is ok and an TMSI is allocated to the phone. 6) To telnet into the osmocon, I can start a call to another phone (#Call 1 13564******). 7) I can send a sms to another phone. So far, all(MOC) is ok. But If using the osmocommbb phone(13681******) as the target phone(MOT), (for example, Iuse a normal phone to call the osmocombb phone), it is very rare that the osmocombb phone have a respose to the paging. 1) I have check the paging messages in the log.txt file and find that there only one paging respone messages such as "TMSI MATCH" as I have call the osmocombb phone about 20 times. In the success case: ..............gsm322.c:1966 Cell ARFCN 13 selected.gsm322.c:2423 Tune to frequency 13.gsm322.c:468 Sync to ARFCN=13 rxlev=-68 (Sysinfo, ccch mode NON-COMB)gsm322.c:2450 Cell available.gsm322.c:4049 (ms 1) Event 'EVENT_CELL_FOUND' for Cell selection in state 'C5 choose cell'gsm322.c:3383 Camping normally on cell (ARFCN=13 mcc=460 mnc=00 China, China Mobile)gsm322.c:829 new state 'C5 choose cell' -> 'C3 camped normally'gsm48_mm.c:4325 (ms 1) Received 'MM_EVENT_CELL_SELECTED' event in state wait for network commandgsm48_mm.c:1130 We are in registered LAI as returning to MM IDLEgsm48_mm.c:919 new state wait for network command -> MM IDLE, normal servicegsm48_mm.c:426 starting T3212 (periodic loc. upd. delay) with 7200 secondsgsm322.c:2947 Channel synched. (ARFCN=13, snr=16, BSIC=29).............. gsm48_rr.c:2116 TMSI a0b186e9 matchesgsm48_rr.c:1307 Establish radio link due to paging requestgsm322.c:4049 (ms 1) Event 'EVENT_LEAVE_IDLE' for Cell selection in state 'C3 camped normally'gsm322.c:829 new state 'C3 camped normally' -> 'connected mode 1'gsm322.c:3665 Going to camping (normal) ARFCN 13.gsm322.c:468 Sync to ARFCN=13 rxlev=-68 (Sysinfo, ccch mode NON-COMB)gsm48_rr.c:355 new state idle -> connection pendinggsm48_rr.c:1422 CHANNEL REQUEST: 20 (PAGING TCH/F)gsm322.c:2947 Channel synched. (ARFCN=13, snr=16, BSIC=29) .......... From the log info I can see that: a) the phone is camped in ARFCN 13 and receive paging in this cell. b) the signal of cell is strong enough 2) I have no an OpenBTS device to send some paging messages to check where is the problem further. Maybe I miss something. Any suggestion is appreciated! Thank you very much! Best Regards Shang

1 0

Jump to page:

2026

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

baseband-devel