- baseband-devel - lists.osmocom.org

delay in SIM reader interrupt handler
by jolly 01 Nov '11

01 Nov '11

hi dieter, i like to clean up and merge the sim reader code with master branch. while looking at the code i found a delay_ms(1) in interrupt handler: ------- /* Used by: calypso_sim_transmit() to transmit the data */ if(regVal & REG_SIM_IT_SIM_TX) { #if (SIM_DEBUG == 1) puts(" Waiting for transmit...\n"); #endif if(sim_tx_character_count >= sim_tx_character_length) { txDoneFlag = 1; } else { writew(*tx_buffer,REG_SIM_DTX); tx_buffer++; sim_tx_character_count++; #if 1 /* Dieter: set to 0 to get problems with some cards */ /* its essential to immediately switch to RX after TX is done */ if(sim_tx_character_count >= sim_tx_character_length) { /* TODO: set a proper delay here, 4 is to long if not debugging and no delay is too short */ delay_ms(1); /* Switch I/O direction to input */ writew(readw(REG_SIM_CONF1) & ~REG_SIM_CONF1_CONFTXRX, REG_SIM_CONF1); } #endif } } --------- i removed the delay, and it works. i checked the tsm30 source code. it also sets the IO to input right after writing the last TX byte. (i guess that the controller will trigger the IO switching at the end of transmission.) so why do we need that delay? are there any problems? regards, andreas

1 0

SMS support for osmocombb
by Andreas Eversberg 31 Oct '11

31 Oct '11

hi, i just finished SMS support for osmocombb. everything is committed in my jolly/testing branch. in order to support SMS, i extracted the SMS transcoding from openbsc. (jolly/sms branch) the SMC and SMR layer protocols are extracted and rewritten and use messages between layers and have state machines. they are added to libosmocore also. (jolly/sms branch) openbsc (jolly/sms branch) now uses the SMS layers and transcoding of libosmocore. LAPDm now supports correct handling of SAPI 3 datalink, especially on SACCH. the mobility management and radio ressource layers of osmocombb now support MM connections with SAPI 3. i have tested it on test BTS setup only, so feel free to run it and report bugs. regards, andreas

1 0

Problems while building osmocomBB
by Begerad Stefan 27 Oct '11

27 Oct '11

Hi guys, I dunno if that is the right place for my concern about building the osmocomBB source. Here is what I already have done: - downloading the sources for osmocomBB and GNU toolchain for ARM, - setting the PATH for the arm-elf-* executables, - calling make in the src directory. Now, this appears as response of the make command in the terminal: cd shared/libosmocore/build-host && ../configure configure: error: cannot find install-sh, install.sh, or shtool in ".." "../.." "../../.." make: *** [shared/libosmocore/build-host/Makefile] Error 1. If you need details about my system, you can look at the following snippet from the config.log file: This file contains any messages produced by compilers while running configure, to aid debugging if configure makes a mistake. It was created by libosmocore configure UNKNOWN, which was generated by GNU Autoconf 2.65. Invocation command line was $ ../configure ## --------- ## ## Platform. ## ## --------- ## hostname = ubuntu-stefan uname -m = x86_64 uname -r = 2.6.32-24-generic uname -s = Linux uname -v = #41-Ubuntu SMP Thu Aug 19 01:38:40 UTC 2010 /usr/bin/uname -p = unknown /bin/uname -X = unknown /bin/arch = unknown /usr/bin/arch -k = unknown /usr/convex/getsysinfo = unknown /usr/bin/hostinfo = unknown /bin/machine = unknown /usr/bin/oslevel = unknown /bin/universe = unknown PATH: /usr/local/sbin PATH: /usr/local/bin PATH: /usr/sbin PATH: /usr/bin PATH: /sbin PATH: /bin PATH: /usr/games PATH: /home/stefan/osmocomBB/gnuarm-4.0.2/bin ## ----------- ## ## Core tests. ## ## ----------- ## configure:2032: error: cannot find install-sh, install.sh, or shtool in ".." "../.." "../../..". So, I would be very glad, if someone could give me a hint to solve the problem. Thank you in advance. Regards, begy

2 2

moving SMS core code into libosmocore
by jolly 24 Oct '11

24 Oct '11

hi, i am thinking about moving sms code from openbsc to libsomocore. my idea is to move the core code of openbsc to libosmocore's src/gsm and include/osmocom/gsm/ respectively. one problem is that the transaction structure of osmocombb and openbsc is different. for sms support there could be a common part inside the union of each transaction: struct gsm_trans { ... union { ... struct { uint8_t link_id; /* RSL Link ID to be used for this trans */ int is_mt; /* is this a MO (0) or MT (1) transfer */ enum gsm411_cp_state cp_state; struct osmo_timer_list cp_timer; enum gsm411_rp_state rp_state; struct gsm_sms *sms; } sms; }; }; i would suggest to move the common part to libosmocore and name it "gsm_trans_sms". then both openbsc and osmocombb can use the same sms structure. also the "gsm_sms" structure itself must be generalized and not rely on openbsc structures. (i have not yet looked at it.) to get reference to the private gsm_trans, openbsc and osmocombb can now use "container_of" in the specific sms glue code. any ideas / suggestions? andreas

1 0

GSM Muti-antenna Receiver
by 天行 23 Oct '11

23 Oct '11

Hi all: I try make usrp work on Muti-antenna mode , 1 to downlink , 1 to uplink. first , i only decode downlink, it can found FCCH,but can't decode sch. any suggestion? tianxing@tianxing-MS-7345:~/gsm/airprobe-gprs/gsm-receiver/src/python$ ./gsm_reive_usrp_mono.py -c 122 A side: Flex 900 Rx MIMO B B side: Flex 900 Rx MIMO B gain_a: 45.0 gain_b: 45.0 A side: The carrier frequency is set as 959400000.0 B side: The carrier frequency is set as 959400000.0 mux_val = 0x2301 input_rate: 571428.571429 sample rate: 0.527472527473 filter_cutoff: 145000.0 filter_t_width: 10000.0 >>> gr_fir_ccc: using SSE input_rate: 571428.571429 sample rate: 0.527472527473 filter_cutoff: 145000.0 filter_t_width: 10000.0 >>> gr_fir_ccf: using SSE Key: '0000000000000000' Configuration: '0C' Configuration TS: 0 configure_receiver 1319360150.211137 3014114160: fcch found on position: 24508 1319360150.211206 3014114160: freq_offset: -2659.853516 1319360150.254086 3014114160: fcch found on position: 77189 1319360150.254132 3014114160: freq_offset: -261.283386 sch.c:260 ERR: conv_decode 11 1319360150.307770 3014114160: fcch found on position: 135276 1319360150.307814 3014114160: freq_offset: -2574.190186 sch.c:260 ERR: conv_decode 10 1319360150.352075 3014114160: fcch found on position: 188023 1319360150.352120 3014114160: freq_offset: -375.097321 sch.c:260 ERR: conv_decode 8

1 0

AMR support
by Aegean Chou 23 Oct '11

23 Oct '11

Hi, all The osmocomBB no AMR support yet now (only FR, HR and EFR). /* no AMR yet */ void dsp_load_tch_param(struct gsm_time *next_time, if (tch_mode) { switch (l1s.tch_mode) { case GSM48_CMODE_SPEECH_V1: *tch_mode = *tch_f_hn ? TCH_FS_MODE : TCH_HS_MODE; break; case GSM48_CMODE_SPEECH_EFR: *tch_mode = *tch_f_hn ? TCH_EFR_MODE : SIG_ONLY_MODE; break; default: *tch_mode = SIG_ONLY_MODE; } } i checked the product datasheet, the C123 can support AMR from the beginning. does anyone can give me some information to patch it? BTW, i havn't 30 source, so i can't reference it. Best regards Aegean Chou

2 1

Build fails on OSX Lion
by Martin Auer 21 Oct '11

21 Oct '11

Hi, when I try to build osmocombb on OSX Lion with MacPorts it fails because it cannot find linux/serial.h. I think it is needed to set some data rate for RS232? Is there a way to overcome this for OSX? Thanks in advance, Martin ../../src/serial.c:41:26: error: linux/serial.h: No such file or directory bash-3.2# make -e CROSS_TOOL_PREFIX=arm-elf-gcc-4.6 cd shared/libosmocore && autoreconf -i glibtoolize: putting auxiliary files in `.'. glibtoolize: copying file `./ltmain.sh' glibtoolize: putting macros in AC_CONFIG_MACRO_DIR, `m4'. glibtoolize: copying file `m4/libtool.m4' glibtoolize: copying file `m4/ltoptions.m4' glibtoolize: copying file `m4/ltsugar.m4' glibtoolize: copying file `m4/ltversion.m4' glibtoolize: copying file `m4/lt~obsolete.m4' configure.ac:14: installing `./config.sub' configure.ac:5: installing `./missing' configure.ac:5: installing `./install-sh' configure.ac:14: installing `./config.guess' src/Makefile.am: installing `./depcomp' mkdir shared/libosmocore/build-target cd shared/libosmocore/build-target && ../configure \ --host=arm-elf --enable-embedded --disable-shared \ --disable-tests ac_cv_header_sys_select_h=no \ --disable-tests ac_cv_header_sys_socket_h=no \ CFLAGS="-Os -ffunction-sections -I/opt/local/osmocom-bb/src/target/firmware/include -nostartfiles -nodefaultlibs" configure: WARNING: If you wanted to set the --build type, don't use --host. If a cross compiler is detected then cross compile mode will be used. checking for a BSD-compatible install... /usr/bin/install -c checking whether build environment is sane... yes checking for a thread-safe mkdir -p... ../install-sh -c -d checking for gawk... no checking for mawk... no checking for nawk... no checking for awk... awk checking whether make sets $(MAKE)... yes checking for arm-elf-strip... arm-elf-strip checking whether make sets $(MAKE)... (cached) yes checking for arm-elf-gcc... arm-elf-gcc checking for C compiler default output file name... a.out checking whether the C compiler works... yes checking whether we are cross compiling... yes checking for suffix of executables... checking for suffix of object files... o checking whether we are using the GNU C compiler... yes checking whether arm-elf-gcc accepts -g... yes checking for arm-elf-gcc option to accept ISO C89... none needed checking for style of include used by make... GNU checking dependency style of arm-elf-gcc... gcc3 checking for a BSD-compatible install... /usr/bin/install -c checking build system type... i386-apple-darwin11.1.0 checking host system type... arm-unknown-elf checking how to print strings... printf checking for a sed that does not truncate output... /usr/bin/sed checking for grep that handles long lines and -e... /usr/bin/grep checking for egrep... /usr/bin/grep -E checking for fgrep... /usr/bin/grep -F checking for ld used by arm-elf-gcc... /Volumes/Speicher/opt/local/arm-elf/bin/ld checking if the linker (/Volumes/Speicher/opt/local/arm-elf/bin/ld) is GNU ld... yes checking for BSD- or MS-compatible name lister (nm)... /opt/local/bin//arm-elf-nm -B checking the name lister (/opt/local/bin//arm-elf-nm -B) interface... BSD nm checking whether ln -s works... yes checking the maximum length of command line arguments... 196608 checking whether the shell understands some XSI constructs... yes checking whether the shell understands "+="... yes checking for /Volumes/Speicher/opt/local/arm-elf/bin/ld option to reload object files... -r checking for arm-elf-objdump... arm-elf-objdump checking how to recognize dependent libraries... unknown checking for arm-elf-ar... arm-elf-ar checking for arm-elf-strip... (cached) arm-elf-strip checking for arm-elf-ranlib... arm-elf-ranlib checking command to parse /opt/local/bin//arm-elf-nm -B output from arm-elf-gcc object... ok checking how to run the C preprocessor... arm-elf-gcc -E checking for ANSI C header files... yes checking for sys/types.h... yes checking for sys/stat.h... yes checking for stdlib.h... yes checking for string.h... yes checking for memory.h... yes checking for strings.h... yes checking for inttypes.h... yes checking for stdint.h... yes checking for unistd.h... yes checking for dlfcn.h... no checking for objdir... .libs checking if arm-elf-gcc supports -fno-rtti -fno-exceptions... no checking for arm-elf-gcc option to produce PIC... -fPIC -DPIC checking if arm-elf-gcc PIC flag -fPIC -DPIC works... yes checking if arm-elf-gcc static flag -static works... yes checking if arm-elf-gcc supports -c -o file.o... yes checking if arm-elf-gcc supports -c -o file.o... (cached) yes checking whether the arm-elf-gcc linker (/Volumes/Speicher/opt/local/arm-elf/bin/ld) supports shared libraries... yes checking dynamic linker characteristics... no checking how to hardcode library paths into programs... immediate checking whether stripping libraries is possible... yes checking if libtool supports shared libraries... no checking whether to build shared libraries... no checking whether to build static libraries... yes checking for ANSI C header files... (cached) yes checking execinfo.h usability... no checking execinfo.h presence... no checking for execinfo.h... no checking for sys/select.h... (cached) no checking for sys/socket.h... (cached) no checking syslog.h usability... no checking syslog.h presence... no checking for syslog.h... no checking ctype.h usability... yes checking ctype.h presence... yes checking for ctype.h... yes checking for doxygen... false checking if arm-elf-gcc supports -fvisibility=hidden... yes configure: creating ./config.status config.status: creating libosmocore.pc config.status: creating libosmocodec.pc config.status: creating libosmovty.pc config.status: creating libosmogsm.pc config.status: creating include/osmocom/Makefile config.status: creating include/osmocom/vty/Makefile config.status: creating include/osmocom/codec/Makefile config.status: creating include/osmocom/crypt/Makefile config.status: creating include/osmocom/gsm/Makefile config.status: creating include/osmocom/gsm/protocol/Makefile config.status: creating include/osmocom/core/Makefile config.status: creating include/Makefile config.status: creating src/Makefile config.status: creating src/vty/Makefile config.status: creating src/codec/Makefile config.status: creating src/gsm/Makefile config.status: creating tests/Makefile config.status: creating tests/timer/Makefile config.status: creating tests/sms/Makefile config.status: creating tests/msgfile/Makefile config.status: creating tests/ussd/Makefile config.status: creating tests/smscb/Makefile config.status: creating tests/bits/Makefile config.status: creating utils/Makefile config.status: creating Doxyfile.core config.status: creating Doxyfile.gsm config.status: creating Doxyfile.vty config.status: creating Doxyfile.codec config.status: creating Makefile config.status: creating config.h config.status: executing depfiles commands config.status: executing libtool commands cd shared/libosmocore/build-target && make echo UNKNOWN > ../.version-t && mv ../.version-t ../.version make all-recursive Making all in include Making all in osmocom Making all in codec make[5]: Nothing to be done for `all'. Making all in crypt make[5]: Nothing to be done for `all'. Making all in gsm Making all in protocol make[6]: Nothing to be done for `all'. make[6]: Nothing to be done for `all-am'. Making all in core make[5]: Nothing to be done for `all'. make[5]: Nothing to be done for `all-am'. make[4]: Nothing to be done for `all-am'. Making all in src Making all in . /bin/sh ../libtool --tag=CC --mode=compile arm-elf-gcc -DHAVE_CONFIG_H -I. -I.. -I../../src -I../../include -fPIC -Wall -Os -ffunction-sections -I/opt/local/osmocom-bb/src/target/firmware/include -nostartfiles -nodefaultlibs -MT timer.lo -MD -MP -MF .deps/timer.Tpo -c -o timer.lo ../../src/timer.c libtool: compile: arm-elf-gcc -DHAVE_CONFIG_H -I. -I.. -I../../src -I../../include -fPIC -Wall -Os -ffunction-sections -I/opt/local/osmocom-bb/src/target/firmware/include -nostartfiles -nodefaultlibs -MT timer.lo -MD -MP -MF .deps/timer.Tpo -c ../../src/timer.c -o timer.o mv -f .deps/timer.Tpo .deps/timer.Plo /bin/sh ../libtool --tag=CC --mode=compile arm-elf-gcc -DHAVE_CONFIG_H -I. -I.. -I../../src -I../../include -fPIC -Wall -Os -ffunction-sections -I/opt/local/osmocom-bb/src/target/firmware/include -nostartfiles -nodefaultlibs -MT select.lo -MD -MP -MF .deps/select.Tpo -c -o select.lo ../../src/select.c libtool: compile: arm-elf-gcc -DHAVE_CONFIG_H -I. -I.. -I../../src -I../../include -fPIC -Wall -Os -ffunction-sections -I/opt/local/osmocom-bb/src/target/firmware/include -nostartfiles -nodefaultlibs -MT select.lo -MD -MP -MF .deps/select.Tpo -c ../../src/select.c -o select.o mv -f .deps/select.Tpo .deps/select.Plo /bin/sh ../libtool --tag=CC --mode=compile arm-elf-gcc -DHAVE_CONFIG_H -I. -I.. -I../../src -I../../include -fPIC -Wall -Os -ffunction-sections -I/opt/local/osmocom-bb/src/target/firmware/include -nostartfiles -nodefaultlibs -MT signal.lo -MD -MP -MF .deps/signal.Tpo -c -o signal.lo ../../src/signal.c libtool: compile: arm-elf-gcc -DHAVE_CONFIG_H -I. -I.. -I../../src -I../../include -fPIC -Wall -Os -ffunction-sections -I/opt/local/osmocom-bb/src/target/firmware/include -nostartfiles -nodefaultlibs -MT signal.lo -MD -MP -MF .deps/signal.Tpo -c ../../src/signal.c -o signal.o mv -f .deps/signal.Tpo .deps/signal.Plo /bin/sh ../libtool --tag=CC --mode=compile arm-elf-gcc -DHAVE_CONFIG_H -I. -I.. -I../../src -I../../include -fPIC -Wall -Os -ffunction-sections -I/opt/local/osmocom-bb/src/target/firmware/include -nostartfiles -nodefaultlibs -MT msgb.lo -MD -MP -MF .deps/msgb.Tpo -c -o msgb.lo ../../src/msgb.c libtool: compile: arm-elf-gcc -DHAVE_CONFIG_H -I. -I.. -I../../src -I../../include -fPIC -Wall -Os -ffunction-sections -I/opt/local/osmocom-bb/src/target/firmware/include -nostartfiles -nodefaultlibs -MT msgb.lo -MD -MP -MF .deps/msgb.Tpo -c ../../src/msgb.c -o msgb.o mv -f .deps/msgb.Tpo .deps/msgb.Plo /bin/sh ../libtool --tag=CC --mode=compile arm-elf-gcc -DHAVE_CONFIG_H -I. -I.. -I../../src -I../../include -fPIC -Wall -Os -ffunction-sections -I/opt/local/osmocom-bb/src/target/firmware/include -nostartfiles -nodefaultlibs -MT bits.lo -MD -MP -MF .deps/bits.Tpo -c -o bits.lo ../../src/bits.c libtool: compile: arm-elf-gcc -DHAVE_CONFIG_H -I. -I.. -I../../src -I../../include -fPIC -Wall -Os -ffunction-sections -I/opt/local/osmocom-bb/src/target/firmware/include -nostartfiles -nodefaultlibs -MT bits.lo -MD -MP -MF .deps/bits.Tpo -c ../../src/bits.c -o bits.o mv -f .deps/bits.Tpo .deps/bits.Plo /bin/sh ../libtool --tag=CC --mode=compile arm-elf-gcc -DHAVE_CONFIG_H -I. -I.. -I../../src -I../../include -fPIC -Wall -Os -ffunction-sections -I/opt/local/osmocom-bb/src/target/firmware/include -nostartfiles -nodefaultlibs -MT bitvec.lo -MD -MP -MF .deps/bitvec.Tpo -c -o bitvec.lo ../../src/bitvec.c libtool: compile: arm-elf-gcc -DHAVE_CONFIG_H -I. -I.. -I../../src -I../../include -fPIC -Wall -Os -ffunction-sections -I/opt/local/osmocom-bb/src/target/firmware/include -nostartfiles -nodefaultlibs -MT bitvec.lo -MD -MP -MF .deps/bitvec.Tpo -c ../../src/bitvec.c -o bitvec.o mv -f .deps/bitvec.Tpo .deps/bitvec.Plo /bin/sh ../libtool --tag=CC --mode=compile arm-elf-gcc -DHAVE_CONFIG_H -I. -I.. -I../../src -I../../include -fPIC -Wall -Os -ffunction-sections -I/opt/local/osmocom-bb/src/target/firmware/include -nostartfiles -nodefaultlibs -MT statistics.lo -MD -MP -MF .deps/statistics.Tpo -c -o statistics.lo ../../src/statistics.c libtool: compile: arm-elf-gcc -DHAVE_CONFIG_H -I. -I.. -I../../src -I../../include -fPIC -Wall -Os -ffunction-sections -I/opt/local/osmocom-bb/src/target/firmware/include -nostartfiles -nodefaultlibs -MT statistics.lo -MD -MP -MF .deps/statistics.Tpo -c ../../src/statistics.c -o statistics.o ../../src/statistics.c: In function 'osmo_counter_get_by_name': ../../src/statistics.c:72:3: warning: implicit declaration of function 'strcmp' [-Wimplicit-function-declaration] mv -f .deps/statistics.Tpo .deps/statistics.Plo /bin/sh ../libtool --tag=CC --mode=compile arm-elf-gcc -DHAVE_CONFIG_H -I. -I.. -I../../src -I../../include -fPIC -Wall -Os -ffunction-sections -I/opt/local/osmocom-bb/src/target/firmware/include -nostartfiles -nodefaultlibs -MT write_queue.lo -MD -MP -MF .deps/write_queue.Tpo -c -o write_queue.lo ../../src/write_queue.c libtool: compile: arm-elf-gcc -DHAVE_CONFIG_H -I. -I.. -I../../src -I../../include -fPIC -Wall -Os -ffunction-sections -I/opt/local/osmocom-bb/src/target/firmware/include -nostartfiles -nodefaultlibs -MT write_queue.lo -MD -MP -MF .deps/write_queue.Tpo -c ../../src/write_queue.c -o write_queue.o mv -f .deps/write_queue.Tpo .deps/write_queue.Plo /bin/sh ../libtool --tag=CC --mode=compile arm-elf-gcc -DHAVE_CONFIG_H -I. -I.. -I../../src -I../../include -fPIC -Wall -Os -ffunction-sections -I/opt/local/osmocom-bb/src/target/firmware/include -nostartfiles -nodefaultlibs -MT utils.lo -MD -MP -MF .deps/utils.Tpo -c -o utils.lo ../../src/utils.c libtool: compile: arm-elf-gcc -DHAVE_CONFIG_H -I. -I.. -I../../src -I../../include -fPIC -Wall -Os -ffunction-sections -I/opt/local/osmocom-bb/src/target/firmware/include -nostartfiles -nodefaultlibs -MT utils.lo -MD -MP -MF .deps/utils.Tpo -c ../../src/utils.c -o utils.o ../../src/utils.c: In function 'get_value_string': ../../src/utils.c:33:2: warning: format '%x' expects argument of type 'unsigned int', but argument 4 has type 'uint32_t' [-Wformat] ../../src/utils.c: In function 'get_string_value': ../../src/utils.c:49:3: warning: implicit declaration of function 'strcasecmp' [-Wimplicit-function-declaration] mv -f .deps/utils.Tpo .deps/utils.Plo /bin/sh ../libtool --tag=CC --mode=compile arm-elf-gcc -DHAVE_CONFIG_H -I. -I.. -I../../src -I../../include -fPIC -Wall -Os -ffunction-sections -I/opt/local/osmocom-bb/src/target/firmware/include -nostartfiles -nodefaultlibs -MT socket.lo -MD -MP -MF .deps/socket.Tpo -c -o socket.lo ../../src/socket.c libtool: compile: arm-elf-gcc -DHAVE_CONFIG_H -I. -I.. -I../../src -I../../include -fPIC -Wall -Os -ffunction-sections -I/opt/local/osmocom-bb/src/target/firmware/include -nostartfiles -nodefaultlibs -MT socket.lo -MD -MP -MF .deps/socket.Tpo -c ../../src/socket.c -o socket.o mv -f .deps/socket.Tpo .deps/socket.Plo /bin/sh ../libtool --tag=CC --mode=compile arm-elf-gcc -DHAVE_CONFIG_H -I. -I.. -I../../src -I../../include -fPIC -Wall -Os -ffunction-sections -I/opt/local/osmocom-bb/src/target/firmware/include -nostartfiles -nodefaultlibs -MT logging.lo -MD -MP -MF .deps/logging.Tpo -c -o logging.lo ../../src/logging.c libtool: compile: arm-elf-gcc -DHAVE_CONFIG_H -I. -I.. -I../../src -I../../include -fPIC -Wall -Os -ffunction-sections -I/opt/local/osmocom-bb/src/target/firmware/include -nostartfiles -nodefaultlibs -MT logging.lo -MD -MP -MF .deps/logging.Tpo -c ../../src/logging.c -o logging.o ../../src/logging.c: In function 'log_parse_category_mask': ../../src/logging.c:162:2: warning: implicit declaration of function 'strdup' [-Wimplicit-function-declaration] ../../src/logging.c:162:15: warning: incompatible implicit declaration of built-in function 'strdup' [enabled by default] ../../src/logging.c:169:2: warning: implicit declaration of function 'strtok' [-Wimplicit-function-declaration] ../../src/logging.c:169:17: warning: assignment makes pointer from integer without a cast [enabled by default] ../../src/logging.c:172:4: warning: implicit declaration of function 'strstr' [-Wimplicit-function-declaration] ../../src/logging.c:172:18: warning: incompatible implicit declaration of built-in function 'strstr' [enabled by default] ../../src/logging.c:197:27: warning: assignment makes pointer from integer without a cast [enabled by default] ../../src/logging.c: In function '_file_output': ../../src/logging.c:427:2: warning: implicit declaration of function 'fprintf' [-Wimplicit-function-declaration] ../../src/logging.c:427:2: warning: incompatible implicit declaration of built-in function 'fprintf' [enabled by default] ../../src/logging.c:428:2: warning: implicit declaration of function 'fflush' [-Wimplicit-function-declaration] ../../src/logging.c: In function 'log_target_create_file': ../../src/logging.c:500:2: warning: implicit declaration of function 'fopen' [-Wimplicit-function-declaration] ../../src/logging.c:500:23: warning: assignment makes pointer from integer without a cast [enabled by default] ../../src/logging.c: In function 'log_target_find': ../../src/logging.c:524:4: warning: implicit declaration of function 'strcmp' [-Wimplicit-function-declaration] ../../src/logging.c: In function 'log_target_destroy': ../../src/logging.c:546:4: warning: implicit declaration of function 'fclose' [-Wimplicit-function-declaration] ../../src/logging.c: In function 'log_target_file_reopen': ../../src/logging.c:559:23: warning: assignment makes pointer from integer without a cast [enabled by default] mv -f .deps/logging.Tpo .deps/logging.Plo /bin/sh ../libtool --tag=CC --mode=compile arm-elf-gcc -DHAVE_CONFIG_H -I. -I.. -I../../src -I../../include -fPIC -Wall -Os -ffunction-sections -I/opt/local/osmocom-bb/src/target/firmware/include -nostartfiles -nodefaultlibs -MT logging_syslog.lo -MD -MP -MF .deps/logging_syslog.Tpo -c -o logging_syslog.lo ../../src/logging_syslog.c libtool: compile: arm-elf-gcc -DHAVE_CONFIG_H -I. -I.. -I../../src -I../../include -fPIC -Wall -Os -ffunction-sections -I/opt/local/osmocom-bb/src/target/firmware/include -nostartfiles -nodefaultlibs -MT logging_syslog.lo -MD -MP -MF .deps/logging_syslog.Tpo -c ../../src/logging_syslog.c -o logging_syslog.o mv -f .deps/logging_syslog.Tpo .deps/logging_syslog.Plo /bin/sh ../libtool --tag=CC --mode=compile arm-elf-gcc -DHAVE_CONFIG_H -I. -I.. -I../../src -I../../include -fPIC -Wall -Os -ffunction-sections -I/opt/local/osmocom-bb/src/target/firmware/include -nostartfiles -nodefaultlibs -MT rate_ctr.lo -MD -MP -MF .deps/rate_ctr.Tpo -c -o rate_ctr.lo ../../src/rate_ctr.c libtool: compile: arm-elf-gcc -DHAVE_CONFIG_H -I. -I.. -I../../src -I../../include -fPIC -Wall -Os -ffunction-sections -I/opt/local/osmocom-bb/src/target/firmware/include -nostartfiles -nodefaultlibs -MT rate_ctr.lo -MD -MP -MF .deps/rate_ctr.Tpo -c ../../src/rate_ctr.c -o rate_ctr.o ../../src/rate_ctr.c: In function 'rate_ctr_get_group_by_name_idx': ../../src/rate_ctr.c:153:3: warning: implicit declaration of function 'strcmp' [-Wimplicit-function-declaration] mv -f .deps/rate_ctr.Tpo .deps/rate_ctr.Plo /bin/sh ../libtool --tag=CC --mode=compile arm-elf-gcc -DHAVE_CONFIG_H -I. -I.. -I../../src -I../../include -fPIC -Wall -Os -ffunction-sections -I/opt/local/osmocom-bb/src/target/firmware/include -nostartfiles -nodefaultlibs -MT gsmtap_util.lo -MD -MP -MF .deps/gsmtap_util.Tpo -c -o gsmtap_util.lo ../../src/gsmtap_util.c libtool: compile: arm-elf-gcc -DHAVE_CONFIG_H -I. -I.. -I../../src -I../../include -fPIC -Wall -Os -ffunction-sections -I/opt/local/osmocom-bb/src/target/firmware/include -nostartfiles -nodefaultlibs -MT gsmtap_util.lo -MD -MP -MF .deps/gsmtap_util.Tpo -c ../../src/gsmtap_util.c -o gsmtap_util.o mv -f .deps/gsmtap_util.Tpo .deps/gsmtap_util.Plo /bin/sh ../libtool --tag=CC --mode=compile arm-elf-gcc -DHAVE_CONFIG_H -I. -I.. -I../../src -I../../include -fPIC -Wall -Os -ffunction-sections -I/opt/local/osmocom-bb/src/target/firmware/include -nostartfiles -nodefaultlibs -MT crc16.lo -MD -MP -MF .deps/crc16.Tpo -c -o crc16.lo ../../src/crc16.c libtool: compile: arm-elf-gcc -DHAVE_CONFIG_H -I. -I.. -I../../src -I../../include -fPIC -Wall -Os -ffunction-sections -I/opt/local/osmocom-bb/src/target/firmware/include -nostartfiles -nodefaultlibs -MT crc16.lo -MD -MP -MF .deps/crc16.Tpo -c ../../src/crc16.c -o crc16.o mv -f .deps/crc16.Tpo .deps/crc16.Plo /bin/sh ../libtool --tag=CC --mode=compile arm-elf-gcc -DHAVE_CONFIG_H -I. -I.. -I../../src -I../../include -fPIC -Wall -Os -ffunction-sections -I/opt/local/osmocom-bb/src/target/firmware/include -nostartfiles -nodefaultlibs -MT panic.lo -MD -MP -MF .deps/panic.Tpo -c -o panic.lo ../../src/panic.c libtool: compile: arm-elf-gcc -DHAVE_CONFIG_H -I. -I.. -I../../src -I../../include -fPIC -Wall -Os -ffunction-sections -I/opt/local/osmocom-bb/src/target/firmware/include -nostartfiles -nodefaultlibs -MT panic.lo -MD -MP -MF .deps/panic.Tpo -c ../../src/panic.c -o panic.o mv -f .deps/panic.Tpo .deps/panic.Plo /bin/sh ../libtool --tag=CC --mode=compile arm-elf-gcc -DHAVE_CONFIG_H -I. -I.. -I../../src -I../../include -fPIC -Wall -Os -ffunction-sections -I/opt/local/osmocom-bb/src/target/firmware/include -nostartfiles -nodefaultlibs -MT backtrace.lo -MD -MP -MF .deps/backtrace.Tpo -c -o backtrace.lo ../../src/backtrace.c libtool: compile: arm-elf-gcc -DHAVE_CONFIG_H -I. -I.. -I../../src -I../../include -fPIC -Wall -Os -ffunction-sections -I/opt/local/osmocom-bb/src/target/firmware/include -nostartfiles -nodefaultlibs -MT backtrace.lo -MD -MP -MF .deps/backtrace.Tpo -c ../../src/backtrace.c -o backtrace.o mv -f .deps/backtrace.Tpo .deps/backtrace.Plo /bin/sh ../libtool --tag=CC --mode=compile arm-elf-gcc -DHAVE_CONFIG_H -I. -I.. -I../../src -I../../include -fPIC -Wall -Os -ffunction-sections -I/opt/local/osmocom-bb/src/target/firmware/include -nostartfiles -nodefaultlibs -MT conv.lo -MD -MP -MF .deps/conv.Tpo -c -o conv.lo ../../src/conv.c libtool: compile: arm-elf-gcc -DHAVE_CONFIG_H -I. -I.. -I../../src -I../../include -fPIC -Wall -Os -ffunction-sections -I/opt/local/osmocom-bb/src/target/firmware/include -nostartfiles -nodefaultlibs -MT conv.lo -MD -MP -MF .deps/conv.Tpo -c ../../src/conv.c -o conv.o mv -f .deps/conv.Tpo .deps/conv.Plo /bin/sh ../libtool --tag=CC --mode=compile arm-elf-gcc -DHAVE_CONFIG_H -I. -I.. -I../../src -I../../include -fPIC -Wall -Os -ffunction-sections -I/opt/local/osmocom-bb/src/target/firmware/include -nostartfiles -nodefaultlibs -MT application.lo -MD -MP -MF .deps/application.Tpo -c -o application.lo ../../src/application.c libtool: compile: arm-elf-gcc -DHAVE_CONFIG_H -I. -I.. -I../../src -I../../include -fPIC -Wall -Os -ffunction-sections -I/opt/local/osmocom-bb/src/target/firmware/include -nostartfiles -nodefaultlibs -MT application.lo -MD -MP -MF .deps/application.Tpo -c ../../src/application.c -o application.o mv -f .deps/application.Tpo .deps/application.Plo /bin/sh ../libtool --tag=CC --mode=link arm-elf-gcc -fPIC -Wall -Os -ffunction-sections -I/opt/local/osmocom-bb/src/target/firmware/include -nostartfiles -nodefaultlibs -version-info 2:0:0 -o libosmocore.la -rpath /usr/local/lib timer.lo select.lo signal.lo msgb.lo bits.lo bitvec.lo statistics.lo write_queue.lo utils.lo socket.lo logging.lo logging_syslog.lo rate_ctr.lo gsmtap_util.lo crc16.lo panic.lo backtrace.lo conv.lo application.lo libtool: link: arm-elf-ar cru .libs/libosmocore.a timer.o select.o signal.o msgb.o bits.o bitvec.o statistics.o write_queue.o utils.o socket.o logging.o logging_syslog.o rate_ctr.o gsmtap_util.o crc16.o panic.o backtrace.o conv.o application.o libtool: link: arm-elf-ranlib .libs/libosmocore.a libtool: link: ( cd ".libs" && rm -f "libosmocore.la" && ln -s "../libosmocore.la" "libosmocore.la" ) Making all in vty make[4]: Nothing to be done for `all'. Making all in codec /bin/sh ../../libtool --tag=CC --mode=compile arm-elf-gcc -DHAVE_CONFIG_H -I. -I../.. -I../../../src/codec -I../../../include -fPIC -Wall -Os -ffunction-sections -I/opt/local/osmocom-bb/src/target/firmware/include -nostartfiles -nodefaultlibs -MT gsm610.lo -MD -MP -MF .deps/gsm610.Tpo -c -o gsm610.lo ../../../src/codec/gsm610.c libtool: compile: arm-elf-gcc -DHAVE_CONFIG_H -I. -I../.. -I../../../src/codec -I../../../include -fPIC -Wall -Os -ffunction-sections -I/opt/local/osmocom-bb/src/target/firmware/include -nostartfiles -nodefaultlibs -MT gsm610.lo -MD -MP -MF .deps/gsm610.Tpo -c ../../../src/codec/gsm610.c -o gsm610.o mv -f .deps/gsm610.Tpo .deps/gsm610.Plo /bin/sh ../../libtool --tag=CC --mode=compile arm-elf-gcc -DHAVE_CONFIG_H -I. -I../.. -I../../../src/codec -I../../../include -fPIC -Wall -Os -ffunction-sections -I/opt/local/osmocom-bb/src/target/firmware/include -nostartfiles -nodefaultlibs -MT gsm620.lo -MD -MP -MF .deps/gsm620.Tpo -c -o gsm620.lo ../../../src/codec/gsm620.c libtool: compile: arm-elf-gcc -DHAVE_CONFIG_H -I. -I../.. -I../../../src/codec -I../../../include -fPIC -Wall -Os -ffunction-sections -I/opt/local/osmocom-bb/src/target/firmware/include -nostartfiles -nodefaultlibs -MT gsm620.lo -MD -MP -MF .deps/gsm620.Tpo -c ../../../src/codec/gsm620.c -o gsm620.o mv -f .deps/gsm620.Tpo .deps/gsm620.Plo /bin/sh ../../libtool --tag=CC --mode=compile arm-elf-gcc -DHAVE_CONFIG_H -I. -I../.. -I../../../src/codec -I../../../include -fPIC -Wall -Os -ffunction-sections -I/opt/local/osmocom-bb/src/target/firmware/include -nostartfiles -nodefaultlibs -MT gsm660.lo -MD -MP -MF .deps/gsm660.Tpo -c -o gsm660.lo ../../../src/codec/gsm660.c libtool: compile: arm-elf-gcc -DHAVE_CONFIG_H -I. -I../.. -I../../../src/codec -I../../../include -fPIC -Wall -Os -ffunction-sections -I/opt/local/osmocom-bb/src/target/firmware/include -nostartfiles -nodefaultlibs -MT gsm660.lo -MD -MP -MF .deps/gsm660.Tpo -c ../../../src/codec/gsm660.c -o gsm660.o mv -f .deps/gsm660.Tpo .deps/gsm660.Plo /bin/sh ../../libtool --tag=CC --mode=compile arm-elf-gcc -DHAVE_CONFIG_H -I. -I../.. -I../../../src/codec -I../../../include -fPIC -Wall -Os -ffunction-sections -I/opt/local/osmocom-bb/src/target/firmware/include -nostartfiles -nodefaultlibs -MT gsm690.lo -MD -MP -MF .deps/gsm690.Tpo -c -o gsm690.lo ../../../src/codec/gsm690.c libtool: compile: arm-elf-gcc -DHAVE_CONFIG_H -I. -I../.. -I../../../src/codec -I../../../include -fPIC -Wall -Os -ffunction-sections -I/opt/local/osmocom-bb/src/target/firmware/include -nostartfiles -nodefaultlibs -MT gsm690.lo -MD -MP -MF .deps/gsm690.Tpo -c ../../../src/codec/gsm690.c -o gsm690.o mv -f .deps/gsm690.Tpo .deps/gsm690.Plo /bin/sh ../../libtool --tag=CC --mode=link arm-elf-gcc -fPIC -Wall -Os -ffunction-sections -I/opt/local/osmocom-bb/src/target/firmware/include -nostartfiles -nodefaultlibs -o libosmocodec.la -rpath /usr/local/lib gsm610.lo gsm620.lo gsm660.lo gsm690.lo libtool: link: arm-elf-ar cru .libs/libosmocodec.a gsm610.o gsm620.o gsm660.o gsm690.o libtool: link: arm-elf-ranlib .libs/libosmocodec.a libtool: link: ( cd ".libs" && rm -f "libosmocodec.la" && ln -s "../libosmocodec.la" "libosmocodec.la" ) Making all in gsm /bin/sh ../../libtool --tag=CC --mode=compile arm-elf-gcc -DHAVE_CONFIG_H -I. -I../.. -I../../../src/gsm -I../../../include -fPIC -Wall -Os -ffunction-sections -I/opt/local/osmocom-bb/src/target/firmware/include -nostartfiles -nodefaultlibs -MT a5.lo -MD -MP -MF .deps/a5.Tpo -c -o a5.lo ../../../src/gsm/a5.c libtool: compile: arm-elf-gcc -DHAVE_CONFIG_H -I. -I../.. -I../../../src/gsm -I../../../include -fPIC -Wall -Os -ffunction-sections -I/opt/local/osmocom-bb/src/target/firmware/include -nostartfiles -nodefaultlibs -MT a5.lo -MD -MP -MF .deps/a5.Tpo -c ../../../src/gsm/a5.c -o a5.o mv -f .deps/a5.Tpo .deps/a5.Plo /bin/sh ../../libtool --tag=CC --mode=compile arm-elf-gcc -DHAVE_CONFIG_H -I. -I../.. -I../../../src/gsm -I../../../include -fPIC -Wall -Os -ffunction-sections -I/opt/local/osmocom-bb/src/target/firmware/include -nostartfiles -nodefaultlibs -MT rxlev_stat.lo -MD -MP -MF .deps/rxlev_stat.Tpo -c -o rxlev_stat.lo ../../../src/gsm/rxlev_stat.c libtool: compile: arm-elf-gcc -DHAVE_CONFIG_H -I. -I../.. -I../../../src/gsm -I../../../include -fPIC -Wall -Os -ffunction-sections -I/opt/local/osmocom-bb/src/target/firmware/include -nostartfiles -nodefaultlibs -MT rxlev_stat.lo -MD -MP -MF .deps/rxlev_stat.Tpo -c ../../../src/gsm/rxlev_stat.c -o rxlev_stat.o mv -f .deps/rxlev_stat.Tpo .deps/rxlev_stat.Plo /bin/sh ../../libtool --tag=CC --mode=compile arm-elf-gcc -DHAVE_CONFIG_H -I. -I../.. -I../../../src/gsm -I../../../include -fPIC -Wall -Os -ffunction-sections -I/opt/local/osmocom-bb/src/target/firmware/include -nostartfiles -nodefaultlibs -MT tlv_parser.lo -MD -MP -MF .deps/tlv_parser.Tpo -c -o tlv_parser.lo ../../../src/gsm/tlv_parser.c libtool: compile: arm-elf-gcc -DHAVE_CONFIG_H -I. -I../.. -I../../../src/gsm -I../../../include -fPIC -Wall -Os -ffunction-sections -I/opt/local/osmocom-bb/src/target/firmware/include -nostartfiles -nodefaultlibs -MT tlv_parser.lo -MD -MP -MF .deps/tlv_parser.Tpo -c ../../../src/gsm/tlv_parser.c -o tlv_parser.o mv -f .deps/tlv_parser.Tpo .deps/tlv_parser.Plo /bin/sh ../../libtool --tag=CC --mode=compile arm-elf-gcc -DHAVE_CONFIG_H -I. -I../.. -I../../../src/gsm -I../../../include -fPIC -Wall -Os -ffunction-sections -I/opt/local/osmocom-bb/src/target/firmware/include -nostartfiles -nodefaultlibs -MT comp128.lo -MD -MP -MF .deps/comp128.Tpo -c -o comp128.lo ../../../src/gsm/comp128.c libtool: compile: arm-elf-gcc -DHAVE_CONFIG_H -I. -I../.. -I../../../src/gsm -I../../../include -fPIC -Wall -Os -ffunction-sections -I/opt/local/osmocom-bb/src/target/firmware/include -nostartfiles -nodefaultlibs -MT comp128.lo -MD -MP -MF .deps/comp128.Tpo -c ../../../src/gsm/comp128.c -o comp128.o mv -f .deps/comp128.Tpo .deps/comp128.Plo /bin/sh ../../libtool --tag=CC --mode=compile arm-elf-gcc -DHAVE_CONFIG_H -I. -I../.. -I../../../src/gsm -I../../../include -fPIC -Wall -Os -ffunction-sections -I/opt/local/osmocom-bb/src/target/firmware/include -nostartfiles -nodefaultlibs -MT gsm_utils.lo -MD -MP -MF .deps/gsm_utils.Tpo -c -o gsm_utils.lo ../../../src/gsm/gsm_utils.c libtool: compile: arm-elf-gcc -DHAVE_CONFIG_H -I. -I../.. -I../../../src/gsm -I../../../include -fPIC -Wall -Os -ffunction-sections -I/opt/local/osmocom-bb/src/target/firmware/include -nostartfiles -nodefaultlibs -MT gsm_utils.lo -MD -MP -MF .deps/gsm_utils.Tpo -c ../../../src/gsm/gsm_utils.c -o gsm_utils.o ../../../src/gsm/gsm_utils.c: In function 'gsm_7bit_encode': ../../../src/gsm/gsm_utils.c:253:13: warning: variable 'z' set but not used [-Wunused-but-set-variable] mv -f .deps/gsm_utils.Tpo .deps/gsm_utils.Plo /bin/sh ../../libtool --tag=CC --mode=compile arm-elf-gcc -DHAVE_CONFIG_H -I. -I../.. -I../../../src/gsm -I../../../include -fPIC -Wall -Os -ffunction-sections -I/opt/local/osmocom-bb/src/target/firmware/include -nostartfiles -nodefaultlibs -MT rsl.lo -MD -MP -MF .deps/rsl.Tpo -c -o rsl.lo ../../../src/gsm/rsl.c libtool: compile: arm-elf-gcc -DHAVE_CONFIG_H -I. -I../.. -I../../../src/gsm -I../../../include -fPIC -Wall -Os -ffunction-sections -I/opt/local/osmocom-bb/src/target/firmware/include -nostartfiles -nodefaultlibs -MT rsl.lo -MD -MP -MF .deps/rsl.Tpo -c ../../../src/gsm/rsl.c -o rsl.o mv -f .deps/rsl.Tpo .deps/rsl.Plo /bin/sh ../../libtool --tag=CC --mode=compile arm-elf-gcc -DHAVE_CONFIG_H -I. -I../.. -I../../../src/gsm -I../../../include -fPIC -Wall -Os -ffunction-sections -I/opt/local/osmocom-bb/src/target/firmware/include -nostartfiles -nodefaultlibs -MT gsm48.lo -MD -MP -MF .deps/gsm48.Tpo -c -o gsm48.lo ../../../src/gsm/gsm48.c libtool: compile: arm-elf-gcc -DHAVE_CONFIG_H -I. -I../.. -I../../../src/gsm -I../../../include -fPIC -Wall -Os -ffunction-sections -I/opt/local/osmocom-bb/src/target/firmware/include -nostartfiles -nodefaultlibs -MT gsm48.lo -MD -MP -MF .deps/gsm48.Tpo -c ../../../src/gsm/gsm48.c -o gsm48.o ../../../src/gsm/gsm48.c: In function 'gsm48_mi_to_string': ../../../src/gsm/gsm48.c:348:4: warning: format '%u' expects argument of type 'unsigned int', but argument 4 has type 'uint32_t' [-Wformat] mv -f .deps/gsm48.Tpo .deps/gsm48.Plo /bin/sh ../../libtool --tag=CC --mode=compile arm-elf-gcc -DHAVE_CONFIG_H -I. -I../.. -I../../../src/gsm -I../../../include -fPIC -Wall -Os -ffunction-sections -I/opt/local/osmocom-bb/src/target/firmware/include -nostartfiles -nodefaultlibs -MT gsm48_ie.lo -MD -MP -MF .deps/gsm48_ie.Tpo -c -o gsm48_ie.lo ../../../src/gsm/gsm48_ie.c libtool: compile: arm-elf-gcc -DHAVE_CONFIG_H -I. -I../.. -I../../../src/gsm -I../../../include -fPIC -Wall -Os -ffunction-sections -I/opt/local/osmocom-bb/src/target/firmware/include -nostartfiles -nodefaultlibs -MT gsm48_ie.lo -MD -MP -MF .deps/gsm48_ie.Tpo -c ../../../src/gsm/gsm48_ie.c -o gsm48_ie.o mv -f .deps/gsm48_ie.Tpo .deps/gsm48_ie.Plo /bin/sh ../../libtool --tag=CC --mode=compile arm-elf-gcc -DHAVE_CONFIG_H -I. -I../.. -I../../../src/gsm -I../../../include -fPIC -Wall -Os -ffunction-sections -I/opt/local/osmocom-bb/src/target/firmware/include -nostartfiles -nodefaultlibs -MT gsm0808.lo -MD -MP -MF .deps/gsm0808.Tpo -c -o gsm0808.lo ../../../src/gsm/gsm0808.c libtool: compile: arm-elf-gcc -DHAVE_CONFIG_H -I. -I../.. -I../../../src/gsm -I../../../include -fPIC -Wall -Os -ffunction-sections -I/opt/local/osmocom-bb/src/target/firmware/include -nostartfiles -nodefaultlibs -MT gsm0808.lo -MD -MP -MF .deps/gsm0808.Tpo -c ../../../src/gsm/gsm0808.c -o gsm0808.o mv -f .deps/gsm0808.Tpo .deps/gsm0808.Plo /bin/sh ../../libtool --tag=CC --mode=compile arm-elf-gcc -DHAVE_CONFIG_H -I. -I../.. -I../../../src/gsm -I../../../include -fPIC -Wall -Os -ffunction-sections -I/opt/local/osmocom-bb/src/target/firmware/include -nostartfiles -nodefaultlibs -MT sysinfo.lo -MD -MP -MF .deps/sysinfo.Tpo -c -o sysinfo.lo ../../../src/gsm/sysinfo.c libtool: compile: arm-elf-gcc -DHAVE_CONFIG_H -I. -I../.. -I../../../src/gsm -I../../../include -fPIC -Wall -Os -ffunction-sections -I/opt/local/osmocom-bb/src/target/firmware/include -nostartfiles -nodefaultlibs -MT sysinfo.lo -MD -MP -MF .deps/sysinfo.Tpo -c ../../../src/gsm/sysinfo.c -o sysinfo.o mv -f .deps/sysinfo.Tpo .deps/sysinfo.Plo /bin/sh ../../libtool --tag=CC --mode=compile arm-elf-gcc -DHAVE_CONFIG_H -I. -I../.. -I../../../src/gsm -I../../../include -fPIC -Wall -Os -ffunction-sections -I/opt/local/osmocom-bb/src/target/firmware/include -nostartfiles -nodefaultlibs -MT gprs_cipher_core.lo -MD -MP -MF .deps/gprs_cipher_core.Tpo -c -o gprs_cipher_core.lo ../../../src/gsm/gprs_cipher_core.c libtool: compile: arm-elf-gcc -DHAVE_CONFIG_H -I. -I../.. -I../../../src/gsm -I../../../include -fPIC -Wall -Os -ffunction-sections -I/opt/local/osmocom-bb/src/target/firmware/include -nostartfiles -nodefaultlibs -MT gprs_cipher_core.lo -MD -MP -MF .deps/gprs_cipher_core.Tpo -c ../../../src/gsm/gprs_cipher_core.c -o gprs_cipher_core.o mv -f .deps/gprs_cipher_core.Tpo .deps/gprs_cipher_core.Plo /bin/sh ../../libtool --tag=CC --mode=compile arm-elf-gcc -DHAVE_CONFIG_H -I. -I../.. -I../../../src/gsm -I../../../include -fPIC -Wall -Os -ffunction-sections -I/opt/local/osmocom-bb/src/target/firmware/include -nostartfiles -nodefaultlibs -MT gsm0480.lo -MD -MP -MF .deps/gsm0480.Tpo -c -o gsm0480.lo ../../../src/gsm/gsm0480.c libtool: compile: arm-elf-gcc -DHAVE_CONFIG_H -I. -I../.. -I../../../src/gsm -I../../../include -fPIC -Wall -Os -ffunction-sections -I/opt/local/osmocom-bb/src/target/firmware/include -nostartfiles -nodefaultlibs -MT gsm0480.lo -MD -MP -MF .deps/gsm0480.Tpo -c ../../../src/gsm/gsm0480.c -o gsm0480.o ../../../src/gsm/gsm0480.c: In function 'parse_process_uss_req': ../../../src/gsm/gsm0480.c:405:7: warning: pointer targets in passing argument 1 of 'gsm_7bit_decode' differ in signedness [-Wpointer-sign] ../../../include/osmocom/gsm/gsm_utils.h:59:5: note: expected 'char *' but argument is of type 'uint8_t *' mv -f .deps/gsm0480.Tpo .deps/gsm0480.Plo /bin/sh ../../libtool --tag=CC --mode=compile arm-elf-gcc -DHAVE_CONFIG_H -I. -I../.. -I../../../src/gsm -I../../../include -fPIC -Wall -Os -ffunction-sections -I/opt/local/osmocom-bb/src/target/firmware/include -nostartfiles -nodefaultlibs -MT abis_nm.lo -MD -MP -MF .deps/abis_nm.Tpo -c -o abis_nm.lo ../../../src/gsm/abis_nm.c libtool: compile: arm-elf-gcc -DHAVE_CONFIG_H -I. -I../.. -I../../../src/gsm -I../../../include -fPIC -Wall -Os -ffunction-sections -I/opt/local/osmocom-bb/src/target/firmware/include -nostartfiles -nodefaultlibs -MT abis_nm.lo -MD -MP -MF .deps/abis_nm.Tpo -c ../../../src/gsm/abis_nm.c -o abis_nm.o mv -f .deps/abis_nm.Tpo .deps/abis_nm.Plo /bin/sh ../../libtool --tag=CC --mode=compile arm-elf-gcc -DHAVE_CONFIG_H -I. -I../.. -I../../../src/gsm -I../../../include -fPIC -Wall -Os -ffunction-sections -I/opt/local/osmocom-bb/src/target/firmware/include -nostartfiles -nodefaultlibs -MT gsm0502.lo -MD -MP -MF .deps/gsm0502.Tpo -c -o gsm0502.lo ../../../src/gsm/gsm0502.c libtool: compile: arm-elf-gcc -DHAVE_CONFIG_H -I. -I../.. -I../../../src/gsm -I../../../include -fPIC -Wall -Os -ffunction-sections -I/opt/local/osmocom-bb/src/target/firmware/include -nostartfiles -nodefaultlibs -MT gsm0502.lo -MD -MP -MF .deps/gsm0502.Tpo -c ../../../src/gsm/gsm0502.c -o gsm0502.o mv -f .deps/gsm0502.Tpo .deps/gsm0502.Plo /bin/sh ../../libtool --tag=CC --mode=compile arm-elf-gcc -DHAVE_CONFIG_H -I. -I../.. -I../../../src/gsm -I../../../include -fPIC -Wall -Os -ffunction-sections -I/opt/local/osmocom-bb/src/target/firmware/include -nostartfiles -nodefaultlibs -MT lapdm.lo -MD -MP -MF .deps/lapdm.Tpo -c -o lapdm.lo ../../../src/gsm/lapdm.c libtool: compile: arm-elf-gcc -DHAVE_CONFIG_H -I. -I../.. -I../../../src/gsm -I../../../include -fPIC -Wall -Os -ffunction-sections -I/opt/local/osmocom-bb/src/target/firmware/include -nostartfiles -nodefaultlibs -MT lapdm.lo -MD -MP -MF .deps/lapdm.Tpo -c ../../../src/gsm/lapdm.c -o lapdm.o ../../../src/gsm/lapdm.c: In function 'lapdm_t200_cb': ../../../src/gsm/lapdm.c:608:2: warning: format '%u' expects argument of type 'unsigned int', but argument 8 has type 'uint32_t' [-Wformat] ../../../src/gsm/lapdm.c:710:3: warning: format '%u' expects argument of type 'unsigned int', but argument 7 has type 'uint32_t' [-Wformat] ../../../src/gsm/lapdm.c: In function 'lapdm_rx_u': ../../../src/gsm/lapdm.c:1136:5: warning: implicit declaration of function 'memcmp' [-Wimplicit-function-declaration] ../../../src/gsm/lapdm.c: In function 'rslms_rx_rll_est_req': ../../../src/gsm/lapdm.c:1800:12: warning: assignment discards 'const' qualifier from pointer target type [enabled by default] ../../../src/gsm/lapdm.c: In function 'rslms_rx_rll_udata_req': ../../../src/gsm/lapdm.c:1892:11: warning: assignment discards 'const' qualifier from pointer target type [enabled by default] ../../../src/gsm/lapdm.c: In function 'rslms_rx_rll_data_req': ../../../src/gsm/lapdm.c:1934:11: warning: assignment discards 'const' qualifier from pointer target type [enabled by default] mv -f .deps/lapdm.Tpo .deps/lapdm.Plo /bin/sh ../../libtool --tag=CC --mode=link arm-elf-gcc -fPIC -Wall -Os -ffunction-sections -I/opt/local/osmocom-bb/src/target/firmware/include -nostartfiles -nodefaultlibs -version-info 1:0:0 -o libosmogsm.la -rpath /usr/local/lib a5.lo rxlev_stat.lo tlv_parser.lo comp128.lo gsm_utils.lo rsl.lo gsm48.lo gsm48_ie.lo gsm0808.lo sysinfo.lo gprs_cipher_core.lo gsm0480.lo abis_nm.lo gsm0502.lo lapdm.lo ../../src/libosmocore.la libtool: link: arm-elf-ar cru .libs/libosmogsm.a a5.o rxlev_stat.o tlv_parser.o comp128.o gsm_utils.o rsl.o gsm48.o gsm48_ie.o gsm0808.o sysinfo.o gprs_cipher_core.o gsm0480.o abis_nm.o gsm0502.o lapdm.o libtool: link: arm-elf-ranlib .libs/libosmogsm.a libtool: link: ( cd ".libs" && rm -f "libosmogsm.la" && ln -s "../libosmogsm.la" "libosmogsm.la" ) Making all in tests make[4]: Nothing to be done for `all-am'. Making all in utils make[3]: Nothing to be done for `all'. make[3]: Nothing to be done for `all-am'. mkdir shared/libosmocore/build-host cd shared/libosmocore/build-host && ../configure checking for a BSD-compatible install... /usr/bin/install -c checking whether build environment is sane... yes checking for a thread-safe mkdir -p... ../install-sh -c -d checking for gawk... no checking for mawk... no checking for nawk... no checking for awk... awk checking whether make sets $(MAKE)... yes checking whether make sets $(MAKE)... (cached) yes checking for gcc... gcc checking for C compiler default output file name... a.out checking whether the C compiler works... yes checking whether we are cross compiling... no checking for suffix of executables... checking for suffix of object files... o checking whether we are using the GNU C compiler... yes checking whether gcc accepts -g... yes checking for gcc option to accept ISO C89... none needed checking for style of include used by make... GNU checking dependency style of gcc... gcc3 checking for a BSD-compatible install... /usr/bin/install -c checking build system type... i386-apple-darwin11.1.0 checking host system type... i386-apple-darwin11.1.0 checking how to print strings... printf checking for a sed that does not truncate output... /usr/bin/sed checking for grep that handles long lines and -e... /usr/bin/grep checking for egrep... /usr/bin/grep -E checking for fgrep... /usr/bin/grep -F checking for ld used by gcc... /usr/llvm-gcc-4.2/libexec/gcc/i686-apple-darwin11/4.2.1/ld checking if the linker (/usr/llvm-gcc-4.2/libexec/gcc/i686-apple-darwin11/4.2.1/ld) is GNU ld... no checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm checking the name lister (/usr/bin/nm) interface... BSD nm checking whether ln -s works... yes checking the maximum length of command line arguments... 196608 checking whether the shell understands some XSI constructs... yes checking whether the shell understands "+="... yes checking for /usr/llvm-gcc-4.2/libexec/gcc/i686-apple-darwin11/4.2.1/ld option to reload object files... -r checking for objdump... no checking how to recognize dependent libraries... pass_all checking for ar... ar checking for strip... strip checking for ranlib... ranlib checking command to parse /usr/bin/nm output from gcc object... ok checking for dsymutil... dsymutil checking for nmedit... nmedit checking for lipo... lipo checking for otool... otool checking for otool64... no checking for -single_module linker flag... yes checking for -exported_symbols_list linker flag... yes checking for -force_load linker flag... yes checking how to run the C preprocessor... gcc -E checking for ANSI C header files... yes checking for sys/types.h... yes checking for sys/stat.h... yes checking for stdlib.h... yes checking for string.h... yes checking for memory.h... yes checking for strings.h... yes checking for inttypes.h... yes checking for stdint.h... yes checking for unistd.h... yes checking for dlfcn.h... yes checking for objdir... .libs checking if gcc supports -fno-rtti -fno-exceptions... no checking for gcc option to produce PIC... -fno-common -DPIC checking if gcc PIC flag -fno-common -DPIC works... yes checking if gcc static flag -static works... no checking if gcc supports -c -o file.o... yes checking if gcc supports -c -o file.o... (cached) yes checking whether the gcc linker (/usr/llvm-gcc-4.2/libexec/gcc/i686-apple-darwin11/4.2.1/ld) supports shared libraries... yes checking dynamic linker characteristics... darwin11.1.0 dyld checking how to hardcode library paths into programs... immediate checking whether stripping libraries is possible... yes checking if libtool supports shared libraries... yes checking whether to build shared libraries... yes checking whether to build static libraries... yes checking for ANSI C header files... (cached) yes checking execinfo.h usability... yes checking execinfo.h presence... yes checking for execinfo.h... yes checking sys/select.h usability... yes checking sys/select.h presence... yes checking for sys/select.h... yes checking sys/socket.h usability... yes checking sys/socket.h presence... yes checking for sys/socket.h... yes checking syslog.h usability... yes checking syslog.h presence... yes checking for syslog.h... yes checking ctype.h usability... yes checking ctype.h presence... yes checking for ctype.h... yes checking for doxygen... false checking if gcc supports -fvisibility=hidden... yes configure: creating ./config.status config.status: creating libosmocore.pc config.status: creating libosmocodec.pc config.status: creating libosmovty.pc config.status: creating libosmogsm.pc config.status: creating include/osmocom/Makefile config.status: creating include/osmocom/vty/Makefile config.status: creating include/osmocom/codec/Makefile config.status: creating include/osmocom/crypt/Makefile config.status: creating include/osmocom/gsm/Makefile config.status: creating include/osmocom/gsm/protocol/Makefile config.status: creating include/osmocom/core/Makefile config.status: creating include/Makefile config.status: creating src/Makefile config.status: creating src/vty/Makefile config.status: creating src/codec/Makefile config.status: creating src/gsm/Makefile config.status: creating tests/Makefile config.status: creating tests/timer/Makefile config.status: creating tests/sms/Makefile config.status: creating tests/msgfile/Makefile config.status: creating tests/ussd/Makefile config.status: creating tests/smscb/Makefile config.status: creating tests/bits/Makefile config.status: creating utils/Makefile config.status: creating Doxyfile.core config.status: creating Doxyfile.gsm config.status: creating Doxyfile.vty config.status: creating Doxyfile.codec config.status: creating Makefile config.status: creating config.h config.status: executing depfiles commands config.status: executing libtool commands cd shared/libosmocore/build-host && make make all-recursive Making all in include Making all in osmocom Making all in vty make[5]: Nothing to be done for `all'. Making all in codec make[5]: Nothing to be done for `all'. Making all in crypt make[5]: Nothing to be done for `all'. Making all in gsm Making all in protocol make[6]: Nothing to be done for `all'. make[6]: Nothing to be done for `all-am'. Making all in core make[5]: Nothing to be done for `all'. make[5]: Nothing to be done for `all-am'. make[4]: Nothing to be done for `all-am'. Making all in src Making all in . /bin/sh ../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I.. -I../../src -I../../include -fPIC -Wall -g -O2 -MT timer.lo -MD -MP -MF .deps/timer.Tpo -c -o timer.lo ../../src/timer.c libtool: compile: gcc -DHAVE_CONFIG_H -I. -I.. -I../../src -I../../include -fPIC -Wall -g -O2 -MT timer.lo -MD -MP -MF .deps/timer.Tpo -c ../../src/timer.c -fno-common -DPIC -o .libs/timer.o libtool: compile: gcc -DHAVE_CONFIG_H -I. -I.. -I../../src -I../../include -fPIC -Wall -g -O2 -MT timer.lo -MD -MP -MF .deps/timer.Tpo -c ../../src/timer.c -o timer.o >/dev/null 2>&1 mv -f .deps/timer.Tpo .deps/timer.Plo /bin/sh ../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I.. -I../../src -I../../include -fPIC -Wall -g -O2 -MT select.lo -MD -MP -MF .deps/select.Tpo -c -o select.lo ../../src/select.c libtool: compile: gcc -DHAVE_CONFIG_H -I. -I.. -I../../src -I../../include -fPIC -Wall -g -O2 -MT select.lo -MD -MP -MF .deps/select.Tpo -c ../../src/select.c -fno-common -DPIC -o .libs/select.o libtool: compile: gcc -DHAVE_CONFIG_H -I. -I.. -I../../src -I../../include -fPIC -Wall -g -O2 -MT select.lo -MD -MP -MF .deps/select.Tpo -c ../../src/select.c -o select.o >/dev/null 2>&1 mv -f .deps/select.Tpo .deps/select.Plo /bin/sh ../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I.. -I../../src -I../../include -fPIC -Wall -g -O2 -MT signal.lo -MD -MP -MF .deps/signal.Tpo -c -o signal.lo ../../src/signal.c libtool: compile: gcc -DHAVE_CONFIG_H -I. -I.. -I../../src -I../../include -fPIC -Wall -g -O2 -MT signal.lo -MD -MP -MF .deps/signal.Tpo -c ../../src/signal.c -fno-common -DPIC -o .libs/signal.o libtool: compile: gcc -DHAVE_CONFIG_H -I. -I.. -I../../src -I../../include -fPIC -Wall -g -O2 -MT signal.lo -MD -MP -MF .deps/signal.Tpo -c ../../src/signal.c -o signal.o >/dev/null 2>&1 mv -f .deps/signal.Tpo .deps/signal.Plo /bin/sh ../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I.. -I../../src -I../../include -fPIC -Wall -g -O2 -MT msgb.lo -MD -MP -MF .deps/msgb.Tpo -c -o msgb.lo ../../src/msgb.c libtool: compile: gcc -DHAVE_CONFIG_H -I. -I.. -I../../src -I../../include -fPIC -Wall -g -O2 -MT msgb.lo -MD -MP -MF .deps/msgb.Tpo -c ../../src/msgb.c -fno-common -DPIC -o .libs/msgb.o libtool: compile: gcc -DHAVE_CONFIG_H -I. -I.. -I../../src -I../../include -fPIC -Wall -g -O2 -MT msgb.lo -MD -MP -MF .deps/msgb.Tpo -c ../../src/msgb.c -o msgb.o >/dev/null 2>&1 mv -f .deps/msgb.Tpo .deps/msgb.Plo /bin/sh ../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I.. -I../../src -I../../include -fPIC -Wall -g -O2 -MT bits.lo -MD -MP -MF .deps/bits.Tpo -c -o bits.lo ../../src/bits.c libtool: compile: gcc -DHAVE_CONFIG_H -I. -I.. -I../../src -I../../include -fPIC -Wall -g -O2 -MT bits.lo -MD -MP -MF .deps/bits.Tpo -c ../../src/bits.c -fno-common -DPIC -o .libs/bits.o libtool: compile: gcc -DHAVE_CONFIG_H -I. -I.. -I../../src -I../../include -fPIC -Wall -g -O2 -MT bits.lo -MD -MP -MF .deps/bits.Tpo -c ../../src/bits.c -o bits.o >/dev/null 2>&1 mv -f .deps/bits.Tpo .deps/bits.Plo /bin/sh ../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I.. -I../../src -I../../include -fPIC -Wall -g -O2 -MT bitvec.lo -MD -MP -MF .deps/bitvec.Tpo -c -o bitvec.lo ../../src/bitvec.c libtool: compile: gcc -DHAVE_CONFIG_H -I. -I.. -I../../src -I../../include -fPIC -Wall -g -O2 -MT bitvec.lo -MD -MP -MF .deps/bitvec.Tpo -c ../../src/bitvec.c -fno-common -DPIC -o .libs/bitvec.o libtool: compile: gcc -DHAVE_CONFIG_H -I. -I.. -I../../src -I../../include -fPIC -Wall -g -O2 -MT bitvec.lo -MD -MP -MF .deps/bitvec.Tpo -c ../../src/bitvec.c -o bitvec.o >/dev/null 2>&1 mv -f .deps/bitvec.Tpo .deps/bitvec.Plo /bin/sh ../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I.. -I../../src -I../../include -fPIC -Wall -g -O2 -MT statistics.lo -MD -MP -MF .deps/statistics.Tpo -c -o statistics.lo ../../src/statistics.c libtool: compile: gcc -DHAVE_CONFIG_H -I. -I.. -I../../src -I../../include -fPIC -Wall -g -O2 -MT statistics.lo -MD -MP -MF .deps/statistics.Tpo -c ../../src/statistics.c -fno-common -DPIC -o .libs/statistics.o libtool: compile: gcc -DHAVE_CONFIG_H -I. -I.. -I../../src -I../../include -fPIC -Wall -g -O2 -MT statistics.lo -MD -MP -MF .deps/statistics.Tpo -c ../../src/statistics.c -o statistics.o >/dev/null 2>&1 mv -f .deps/statistics.Tpo .deps/statistics.Plo /bin/sh ../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I.. -I../../src -I../../include -fPIC -Wall -g -O2 -MT write_queue.lo -MD -MP -MF .deps/write_queue.Tpo -c -o write_queue.lo ../../src/write_queue.c libtool: compile: gcc -DHAVE_CONFIG_H -I. -I.. -I../../src -I../../include -fPIC -Wall -g -O2 -MT write_queue.lo -MD -MP -MF .deps/write_queue.Tpo -c ../../src/write_queue.c -fno-common -DPIC -o .libs/write_queue.o libtool: compile: gcc -DHAVE_CONFIG_H -I. -I.. -I../../src -I../../include -fPIC -Wall -g -O2 -MT write_queue.lo -MD -MP -MF .deps/write_queue.Tpo -c ../../src/write_queue.c -o write_queue.o >/dev/null 2>&1 mv -f .deps/write_queue.Tpo .deps/write_queue.Plo /bin/sh ../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I.. -I../../src -I../../include -fPIC -Wall -g -O2 -MT utils.lo -MD -MP -MF .deps/utils.Tpo -c -o utils.lo ../../src/utils.c libtool: compile: gcc -DHAVE_CONFIG_H -I. -I.. -I../../src -I../../include -fPIC -Wall -g -O2 -MT utils.lo -MD -MP -MF .deps/utils.Tpo -c ../../src/utils.c -fno-common -DPIC -o .libs/utils.o libtool: compile: gcc -DHAVE_CONFIG_H -I. -I.. -I../../src -I../../include -fPIC -Wall -g -O2 -MT utils.lo -MD -MP -MF .deps/utils.Tpo -c ../../src/utils.c -o utils.o >/dev/null 2>&1 mv -f .deps/utils.Tpo .deps/utils.Plo /bin/sh ../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I.. -I../../src -I../../include -fPIC -Wall -g -O2 -MT socket.lo -MD -MP -MF .deps/socket.Tpo -c -o socket.lo ../../src/socket.c libtool: compile: gcc -DHAVE_CONFIG_H -I. -I.. -I../../src -I../../include -fPIC -Wall -g -O2 -MT socket.lo -MD -MP -MF .deps/socket.Tpo -c ../../src/socket.c -fno-common -DPIC -o .libs/socket.o libtool: compile: gcc -DHAVE_CONFIG_H -I. -I.. -I../../src -I../../include -fPIC -Wall -g -O2 -MT socket.lo -MD -MP -MF .deps/socket.Tpo -c ../../src/socket.c -o socket.o >/dev/null 2>&1 mv -f .deps/socket.Tpo .deps/socket.Plo /bin/sh ../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I.. -I../../src -I../../include -fPIC -Wall -g -O2 -MT logging.lo -MD -MP -MF .deps/logging.Tpo -c -o logging.lo ../../src/logging.c libtool: compile: gcc -DHAVE_CONFIG_H -I. -I.. -I../../src -I../../include -fPIC -Wall -g -O2 -MT logging.lo -MD -MP -MF .deps/logging.Tpo -c ../../src/logging.c -fno-common -DPIC -o .libs/logging.o libtool: compile: gcc -DHAVE_CONFIG_H -I. -I.. -I../../src -I../../include -fPIC -Wall -g -O2 -MT logging.lo -MD -MP -MF .deps/logging.Tpo -c ../../src/logging.c -o logging.o >/dev/null 2>&1 mv -f .deps/logging.Tpo .deps/logging.Plo /bin/sh ../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I.. -I../../src -I../../include -fPIC -Wall -g -O2 -MT logging_syslog.lo -MD -MP -MF .deps/logging_syslog.Tpo -c -o logging_syslog.lo ../../src/logging_syslog.c libtool: compile: gcc -DHAVE_CONFIG_H -I. -I.. -I../../src -I../../include -fPIC -Wall -g -O2 -MT logging_syslog.lo -MD -MP -MF .deps/logging_syslog.Tpo -c ../../src/logging_syslog.c -fno-common -DPIC -o .libs/logging_syslog.o ../../src/logging_syslog.c:47: warning: type qualifiers ignored on function return type libtool: compile: gcc -DHAVE_CONFIG_H -I. -I.. -I../../src -I../../include -fPIC -Wall -g -O2 -MT logging_syslog.lo -MD -MP -MF .deps/logging_syslog.Tpo -c ../../src/logging_syslog.c -o logging_syslog.o >/dev/null 2>&1 mv -f .deps/logging_syslog.Tpo .deps/logging_syslog.Plo /bin/sh ../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I.. -I../../src -I../../include -fPIC -Wall -g -O2 -MT rate_ctr.lo -MD -MP -MF .deps/rate_ctr.Tpo -c -o rate_ctr.lo ../../src/rate_ctr.c libtool: compile: gcc -DHAVE_CONFIG_H -I. -I.. -I../../src -I../../include -fPIC -Wall -g -O2 -MT rate_ctr.lo -MD -MP -MF .deps/rate_ctr.Tpo -c ../../src/rate_ctr.c -fno-common -DPIC -o .libs/rate_ctr.o libtool: compile: gcc -DHAVE_CONFIG_H -I. -I.. -I../../src -I../../include -fPIC -Wall -g -O2 -MT rate_ctr.lo -MD -MP -MF .deps/rate_ctr.Tpo -c ../../src/rate_ctr.c -o rate_ctr.o >/dev/null 2>&1 mv -f .deps/rate_ctr.Tpo .deps/rate_ctr.Plo /bin/sh ../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I.. -I../../src -I../../include -fPIC -Wall -g -O2 -MT gsmtap_util.lo -MD -MP -MF .deps/gsmtap_util.Tpo -c -o gsmtap_util.lo ../../src/gsmtap_util.c libtool: compile: gcc -DHAVE_CONFIG_H -I. -I.. -I../../src -I../../include -fPIC -Wall -g -O2 -MT gsmtap_util.lo -MD -MP -MF .deps/gsmtap_util.Tpo -c ../../src/gsmtap_util.c -fno-common -DPIC -o .libs/gsmtap_util.o libtool: compile: gcc -DHAVE_CONFIG_H -I. -I.. -I../../src -I../../include -fPIC -Wall -g -O2 -MT gsmtap_util.lo -MD -MP -MF .deps/gsmtap_util.Tpo -c ../../src/gsmtap_util.c -o gsmtap_util.o >/dev/null 2>&1 mv -f .deps/gsmtap_util.Tpo .deps/gsmtap_util.Plo /bin/sh ../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I.. -I../../src -I../../include -fPIC -Wall -g -O2 -MT crc16.lo -MD -MP -MF .deps/crc16.Tpo -c -o crc16.lo ../../src/crc16.c libtool: compile: gcc -DHAVE_CONFIG_H -I. -I.. -I../../src -I../../include -fPIC -Wall -g -O2 -MT crc16.lo -MD -MP -MF .deps/crc16.Tpo -c ../../src/crc16.c -fno-common -DPIC -o .libs/crc16.o libtool: compile: gcc -DHAVE_CONFIG_H -I. -I.. -I../../src -I../../include -fPIC -Wall -g -O2 -MT crc16.lo -MD -MP -MF .deps/crc16.Tpo -c ../../src/crc16.c -o crc16.o >/dev/null 2>&1 mv -f .deps/crc16.Tpo .deps/crc16.Plo /bin/sh ../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I.. -I../../src -I../../include -fPIC -Wall -g -O2 -MT panic.lo -MD -MP -MF .deps/panic.Tpo -c -o panic.lo ../../src/panic.c libtool: compile: gcc -DHAVE_CONFIG_H -I. -I.. -I../../src -I../../include -fPIC -Wall -g -O2 -MT panic.lo -MD -MP -MF .deps/panic.Tpo -c ../../src/panic.c -fno-common -DPIC -o .libs/panic.o libtool: compile: gcc -DHAVE_CONFIG_H -I. -I.. -I../../src -I../../include -fPIC -Wall -g -O2 -MT panic.lo -MD -MP -MF .deps/panic.Tpo -c ../../src/panic.c -o panic.o >/dev/null 2>&1 mv -f .deps/panic.Tpo .deps/panic.Plo /bin/sh ../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I.. -I../../src -I../../include -fPIC -Wall -g -O2 -MT backtrace.lo -MD -MP -MF .deps/backtrace.Tpo -c -o backtrace.lo ../../src/backtrace.c libtool: compile: gcc -DHAVE_CONFIG_H -I. -I.. -I../../src -I../../include -fPIC -Wall -g -O2 -MT backtrace.lo -MD -MP -MF .deps/backtrace.Tpo -c ../../src/backtrace.c -fno-common -DPIC -o .libs/backtrace.o libtool: compile: gcc -DHAVE_CONFIG_H -I. -I.. -I../../src -I../../include -fPIC -Wall -g -O2 -MT backtrace.lo -MD -MP -MF .deps/backtrace.Tpo -c ../../src/backtrace.c -o backtrace.o >/dev/null 2>&1 mv -f .deps/backtrace.Tpo .deps/backtrace.Plo /bin/sh ../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I.. -I../../src -I../../include -fPIC -Wall -g -O2 -MT conv.lo -MD -MP -MF .deps/conv.Tpo -c -o conv.lo ../../src/conv.c libtool: compile: gcc -DHAVE_CONFIG_H -I. -I.. -I../../src -I../../include -fPIC -Wall -g -O2 -MT conv.lo -MD -MP -MF .deps/conv.Tpo -c ../../src/conv.c -fno-common -DPIC -o .libs/conv.o libtool: compile: gcc -DHAVE_CONFIG_H -I. -I.. -I../../src -I../../include -fPIC -Wall -g -O2 -MT conv.lo -MD -MP -MF .deps/conv.Tpo -c ../../src/conv.c -o conv.o >/dev/null 2>&1 mv -f .deps/conv.Tpo .deps/conv.Plo /bin/sh ../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I.. -I../../src -I../../include -fPIC -Wall -g -O2 -MT application.lo -MD -MP -MF .deps/application.Tpo -c -o application.lo ../../src/application.c libtool: compile: gcc -DHAVE_CONFIG_H -I. -I.. -I../../src -I../../include -fPIC -Wall -g -O2 -MT application.lo -MD -MP -MF .deps/application.Tpo -c ../../src/application.c -fno-common -DPIC -o .libs/application.o libtool: compile: gcc -DHAVE_CONFIG_H -I. -I.. -I../../src -I../../include -fPIC -Wall -g -O2 -MT application.lo -MD -MP -MF .deps/application.Tpo -c ../../src/application.c -o application.o >/dev/null 2>&1 mv -f .deps/application.Tpo .deps/application.Plo /bin/sh ../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I.. -I../../src -I../../include -fPIC -Wall -g -O2 -MT plugin.lo -MD -MP -MF .deps/plugin.Tpo -c -o plugin.lo ../../src/plugin.c libtool: compile: gcc -DHAVE_CONFIG_H -I. -I.. -I../../src -I../../include -fPIC -Wall -g -O2 -MT plugin.lo -MD -MP -MF .deps/plugin.Tpo -c ../../src/plugin.c -fno-common -DPIC -o .libs/plugin.o libtool: compile: gcc -DHAVE_CONFIG_H -I. -I.. -I../../src -I../../include -fPIC -Wall -g -O2 -MT plugin.lo -MD -MP -MF .deps/plugin.Tpo -c ../../src/plugin.c -o plugin.o >/dev/null 2>&1 mv -f .deps/plugin.Tpo .deps/plugin.Plo /bin/sh ../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I.. -I../../src -I../../include -fPIC -Wall -g -O2 -MT talloc.lo -MD -MP -MF .deps/talloc.Tpo -c -o talloc.lo ../../src/talloc.c libtool: compile: gcc -DHAVE_CONFIG_H -I. -I.. -I../../src -I../../include -fPIC -Wall -g -O2 -MT talloc.lo -MD -MP -MF .deps/talloc.Tpo -c ../../src/talloc.c -fno-common -DPIC -o .libs/talloc.o libtool: compile: gcc -DHAVE_CONFIG_H -I. -I.. -I../../src -I../../include -fPIC -Wall -g -O2 -MT talloc.lo -MD -MP -MF .deps/talloc.Tpo -c ../../src/talloc.c -o talloc.o >/dev/null 2>&1 mv -f .deps/talloc.Tpo .deps/talloc.Plo /bin/sh ../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I.. -I../../src -I../../include -fPIC -Wall -g -O2 -MT msgfile.lo -MD -MP -MF .deps/msgfile.Tpo -c -o msgfile.lo ../../src/msgfile.c libtool: compile: gcc -DHAVE_CONFIG_H -I. -I.. -I../../src -I../../include -fPIC -Wall -g -O2 -MT msgfile.lo -MD -MP -MF .deps/msgfile.Tpo -c ../../src/msgfile.c -fno-common -DPIC -o .libs/msgfile.o libtool: compile: gcc -DHAVE_CONFIG_H -I. -I.. -I../../src -I../../include -fPIC -Wall -g -O2 -MT msgfile.lo -MD -MP -MF .deps/msgfile.Tpo -c ../../src/msgfile.c -o msgfile.o >/dev/null 2>&1 mv -f .deps/msgfile.Tpo .deps/msgfile.Plo /bin/sh ../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I.. -I../../src -I../../include -fPIC -Wall -g -O2 -MT serial.lo -MD -MP -MF .deps/serial.Tpo -c -o serial.lo ../../src/serial.c libtool: compile: gcc -DHAVE_CONFIG_H -I. -I.. -I../../src -I../../include -fPIC -Wall -g -O2 -MT serial.lo -MD -MP -MF .deps/serial.Tpo -c ../../src/serial.c -fno-common -DPIC -o .libs/serial.o ../../src/serial.c:41:26: error: linux/serial.h: No such file or directory ../../src/serial.c: In function 'osmo_serial_set_custom_baudrate': ../../src/serial.c:159: error: storage size of 'ser_info' isn't known ../../src/serial.c:161: error: 'TIOCGSERIAL' undeclared (first use in this function) ../../src/serial.c:161: error: (Each undeclared identifier is reported only once ../../src/serial.c:161: error: for each function it appears in.) ../../src/serial.c:167: error: 'ASYNC_SPD_CUST' undeclared (first use in this function) ../../src/serial.c:167: error: 'ASYNC_LOW_LATENCY' undeclared (first use in this function) ../../src/serial.c:170: error: 'TIOCSSERIAL' undeclared (first use in this function) ../../src/serial.c:159: warning: unused variable 'ser_info' ../../src/serial.c: In function 'osmo_serial_clear_custom_baudrate': ../../src/serial.c:189: error: storage size of 'ser_info' isn't known ../../src/serial.c:191: error: 'TIOCGSERIAL' undeclared (first use in this function) ../../src/serial.c:197: error: 'ASYNC_LOW_LATENCY' undeclared (first use in this function) ../../src/serial.c:200: error: 'TIOCSSERIAL' undeclared (first use in this function) ../../src/serial.c:189: warning: unused variable 'ser_info' make[4]: *** [serial.lo] Error 1 make[3]: *** [all-recursive] Error 1 make[2]: *** [all-recursive] Error 1 make[1]: *** [all] Error 2 make: *** [shared/libosmocore/build-host/src/.libs/libosmocore.la] Error 2

5 6

[ANNOUNCE] First OsmocomGMR code release
by Harald Welte 16 Oct '11

16 Oct '11

First Osmocom GMR code release As some of the readers may already know, a couple of Osmocom developers have been working on a new sub-project: OsmocomGMR. The primary goal of this project is to provide a reusable and clean implementation of the various layers of GMR-1. What is GMR-1 ? Well, it stands for "GEO Mobile Radio" and it's a set of specifications describing a satellite based mobile phone network heavily inspired from GSM. One of the major commercial operators of GMR-1 technology is "Thuraya", providing coverage over Europe/Africa/Asia/Australia. So far the implementation focused on the lowest layers: * Physical layer with FCCH sync and demodulation support for * pi4-CBPSK and pi4-CQPSK bursts. * Channel coding layer (scrambling/puncturing/convolutional coding/crc/interleaving/...) And some ancillary tools to exploit those: * A good capture tool to listen to particular ARFCN(s) and channelize them properly * Wireshark support (BCCH only so far) The first 'demo application' using all of the above provides functionalities similar to what airprobe is for GSM: An air interface protocol analyzer that goes all the way from capturing data off-the-air to sending packets to wireshark for analysis. Limited to BCCH only currently but this will evolve with time. Development was mainly done by Sylvain Munaut, with help from Dimitri Stolnikov (early signal captures and his great capture tool), Harald Welte (initiating the project) and Steve Margraf (testing different setup and antenna ideas). If you'd like to know more, you are encourated to read the wiki (http://gmr.osmocom.org/) and join the mailing list (http://lists.osmocom.org/mailman/listinfo/gmr) -- - Harald Welte <laforge(a)gnumonks.org> http://laforge.gnumonks.org/ ============================================================================ "Privacy in residential applications is a desirable marketing option." (ETSI EN 300 175-7 Ch. A6)

1 0

Re: Vitelcom TSM30 source code
by msokolov＠ivan.Harhan.ORG 12 Oct '11

12 Oct '11

R M <rm.engineer84(a)gmail.com> wrote: > I am looking for Vitelcom TSM30 source code. I tried searching for it > in Google. I am not able to find it. I have already helped the OP out off-list. In case anyone else is looking for a copy of that code and all known mirrors have been pulled: I have a copy in my possession, and I've been meaning to put it up on my FTP server, i.e., a new public mirror that would be completely shutdown-proof. (I don't use clouds, I run everything on my own physical HW in my own physical control, housed in my own personal datacenter on my own soil which I have declared to be my own nation with my own laws, so no one in the world can make me take anything down.) However, I am very very technologically-backwards, and my current server HW/OS platform is too ancient to host a 500 MiB blob. (The booty is in the form of an ISO image and appears to contain a huge Windows-based development environment in addition to the actual source.) For ages I've been meaning to set up an additional FTP server on newer HW that can host such big stuff, but that progress is very very slow-going for a bunch of personal reasons. Because I consider it to be my fault that I still haven't followed through with my ages-old promise of setting up that new FTP server, I hereby attempt to make up for it somewhat by making the following offer: if anyone would like a copy of that TSM30 source code, is not able to find it anywhere else, and is not willing to wait however many more months for me to set up that darned server, you can give me your snail mail address and I'll send you a CD-R recorded from that 500 MiB ISO image. With the above out of the way, I happen to have some unanswered questions about the TSM30 phone itself which I wonder if perhaps someone in this community might have some answers to, so I've decided to use this thread (started by someone else to whom I have no relation) to try asking them. :-) (And yes, I've already tried Googling quite extensively.) OK, here we go: 1. Would anyone happen to know the basic specs for the TSM30 phone from an ordinary user's perspective? Which GSM bands does it support? What kind of features does it offer? Judging from a cursory bird's-eye-level look at the source code, it seems to be a few notches above a basic primitive phone like Mot C123, but not quite a smartphone either. I realize that one can probably extract all the answers from the source if one were to study it for months on end (I had no idea it would be this huge!), but I was wondering if anyone already happened to know the answer. Basically I'm trying to decide if it would be worth my while to try to acquire an actual TSM30 hardware unit - which in itself seems to be very non-trivial. 2. Has anyone been able to find a service manual and/or schematics for this phone? 3. Does anyone know the hardware in the TSM30 compares against other Calypso-based phones, such as Mot C123, Openmoko GTA02 or the Leonardo reference design? What are the similarities and differences? TIA a lot for any clues, MS

1 0

Vitelcom TSM30 source code
by R M 09 Oct '11

09 Oct '11

Hi, I am looking for Vitelcom TSM30 source code. I tried searching for it in Google. I am not able to find it. The link that is provided in the wiki is dead. Has any one else found it? If yes can you please provide me the link also. Regards RM

1 0