- baseband-devel - lists.osmocom.org

[PATCH] Adding the manufacturer id of STMicroelectronics (resend)
by Christian Inci 06 May '12

06 May '12

For supporting the flash on a Motorola C118. Signed-off-by: Christian Inci <chris.pcguy.inci(a)gmail.com>

2 1

[ticket] RSSI fails to sync on 1800Mhz bands
by Henk 06 May '12

06 May '12

Version: OSMOCOM Monitor Tool (revision osmocon_v0.0.0-1346-g186fefc-modified) RSSI is running from flash There seems to be a problem when trying to sync to the DCS bands also the spectum window is not that what you expect. There seem to be a few very strong peaks but the rest is flat.

1 1

Ramblings of a Osmocom supporter
by Henk 06 May '12

06 May '12

Hi all, First of all, what an exciting piece of hacking, well done guys! So after one year I revisited the osmocom and flashed the bootloader and the RSSI on my C116 device. I was wondering is there something of a TODO of sorts in order to get users of different skill levels involved? One thing I can think of is extending the loader with functions to access the DSP: read (p)rom, read write regs & memory, potentially adding DSP patching support. Regards, Henk

1 0

Adding the manufacturer id of STMicroelectronics
by Christian Inci 04 May '12

04 May '12

For supporting the flash on a Motorola C118. Signed-off-by: Christian Inci <chris.pcguy.inci(a)gmail.com> --- src/target/firmware/flash/cfi_flash.c | 3 ++- 1 files changed, 2 insertions(+), 1 deletions(-) diff --git a/src/target/firmware/flash/cfi_flash.c b/src/target/firmware/flash/cfi_flash.c index 69369d5..474dcbb 100644 --- a/src/target/firmware/flash/cfi_flash.c +++ b/src/target/firmware/flash/cfi_flash.c @@ -71,6 +71,7 @@ struct cfi_query { /* manufacturer ids */ enum cfi_manuf { + CFI_MANUF_ST = 0x0020, CFI_MANUF_INTEL = 0x0089, }; @@ -532,7 +533,7 @@ int flash_init(flash_t * flash, void *base_addr) if (res) { return res; } - if (m_id != CFI_MANUF_INTEL) { + if (m_id != CFI_MANUF_INTEL && m_id != CFI_MANUF_ST) { /* we only support intel devices */ return -ENOTSUP; } -- 1.7.8.6 --------------020907080906030400030607--

1 0

uwire.c relicensing
by Denis 'GNUtoo' Carikli 02 May '12

02 May '12

Hi, We(Alan Carvalho de Assis and me) also need the permission of Sylvain Munaut and Steve Markgraf for the relicensing of src/target/firmware/ of osmocombb for inclusion in nuttx(BSD licensed). What we need right now is to get the permission on that file: src/target/firmware/calypso/uwire.c Basically we want to add LCD support as quickly as possible to the compal e99(And in parallel to fix the configs and the linker scripts to get more space). Denis.

2 1

May 09, 7pm / Osmocom meeting in Berlin
by Harald Welte 02 May '12

02 May '12

Hi all! This is the announcement for the 3rd incarnation of our bi-weekly Osmocom Berlin meeting. May 09, 7pm @ CCC Berlin, Marienstr. 11, 10113 Berlin The schedule is as follows: 19:00 Introduction / Workshop on Osmocom SIMtrace (Kevin Redon) Kevin will introduce SIM/USIM/UICC cards, present what SIMtrace is and how it works, as well as how to use it to trace communication between SIM card and phone. 20:00 Informal discussions If you are interested to show up, feel free to do so. There is no registration required. If the initial part is not interesting to you, feel free to join us later at 20:00. The meeting is free as in "free beer", despite no actual free beer being around ;) Regards, Harald -- - Harald Welte <laforge(a)gnumonks.org> http://laforge.gnumonks.org/ ============================================================================ "Privacy in residential applications is a desirable marketing option." (ETSI EN 300 175-7 Ch. A6)

1 0

BER
by Micka A. 01 May '12

01 May '12

Hello, there is one question, how in layer23 calculates BER?? for example it shows 143.. 120 .. and so on, there for sure not percent.

1 0

should we continue to focus on nuttx?
by Denis 'GNUtoo' Carikli 30 Apr '12

30 Apr '12

The other day on IRC I was told that: >Apr 29 00:34:36 <Hoernchen> last thing i heard was that nuttx was superseded in favor of a more lightweight solution And: >Apr 29 00:41:03 <steve|m> http://openbsc.osmocom.org/trac/wiki/OsmoDevCon2012/Minutes#a18:30roundtabl… which was made back in march(we also started working on nuttx near march) and contains the following: >laf: summary we could not gain much from nuttx, rockbox could provide use with UI (inspiration)? steve: framebuffer is mosly compatible I wasn't aware of all that. Also I don't have much details on what was said since I wans't there... Should me and Alan Carvalho de Assis continue the work we are doing? What is the current plan? our status is here: http://bb.osmocom.org/trac/wiki/nuttx-bb/drivers The current work on my side is to: * make serial work without sercomm(done locally,just some configuration change) * unbreak the booting of the calypso(require serial to work without sercomm,the commit that created the problem has been identified, how to fix is a work in progress) * I also tried to change toolchain(I generated a toolchain with openembedded) to see if it fixed the issue but according to Gregory it's not the right fix. * I also identified some dummy functions in the nuttx version of sercomm that we should get rid of. On Alan Carvalho de Assis side : he's trying to make the keypad work but he has some difficulties with it. Denis.

4 5

Arkmicro Technologies Inc. ARK3116 Serial
by Darran.Lee 28 Apr '12

28 Apr '12

Hi I am trying to use an Arkmicro Technologies ARK3116 USB to serial cable to communicate with my C118. I have compiled Osmocom-bb successfully on my Debian Squeeze laptop. When I try to run the osmocon utility I get an error "Cannot open serial device /dev/ttyUSB0" My dmesg etc output is: [ 769.752182] usb 5-2: new full speed USB device using uhci_hcd and address 5 [ 769.908979] usb 5-2: New USB device found, idVendor=6547, idProduct=0232 [ 769.908988] usb 5-2: New USB device strings: Mfr=1, Product=3, SerialNumber=0 [ 769.908995] usb 5-2: Product: USB-UART Controller [ 769.909000] usb 5-2: Manufacturer: ArkMicroChips [ 769.909192] usb 5-2: configuration #1 chosen from 1 choice [ 770.029492] usbcore: registered new interface driver usbserial [ 770.029740] USB Serial support registered for generic [ 770.030002] usbcore: registered new interface driver usbserial_generic [ 770.030005] usbserial: USB Serial Driver core [ 770.047650] USB Serial support registered for ark3116 [ 770.048263] ark3116 5-2:1.0: ark3116 converter detected [ 770.076254] usb 5-2: ark3116 converter now attached to ttyUSB0 [ 770.076305] usbcore: registered new interface driver ark3116 ls -l /dev/tty* crw-rw---- 1 root dialout 4, 64 Apr 27 21:01 /dev/ttyS0 crw-rw---- 1 root dialout 4, 65 Apr 27 21:01 /dev/ttyS1 crw-rw---- 1 root dialout 4, 66 Apr 27 21:01 /dev/ttyS2 crw-rw---- 1 root dialout 4, 67 Apr 27 21:01 /dev/ttyS3 crw-rw---- 1 root dialout 188, 0 Apr 27 21:14 /dev/ttyUSB0 lsusb Bus 005 Device 005: ID 6547:0232 Arkmicro Technologies Inc. ARK3116 Serial Bus 005 Device 004: ID 09da:0006 A4 Tech Co., Ltd Optical Mouse WOP-35 / Trust 450L Optical Mouse Bus 005 Device 003: ID 1631:5002 Good Way Technology Bus 005 Device 002: ID 1631:5400 Good Way Technology Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub So I am assuming the drivers are installed correctly but if I run osmocon I get: ./osmocon -p /dev/ttyUSB0 -m c123xor ../../target/firmware/board/compal_e88/loader.compalram.bin Cannot open serial device /dev/ttyUSB0 My Question is, does anyone here have any experience with the Arkmicro Technologies ARK3116 Serial cable? Is there something I have missed? Thanks Tokala

2 1

How one can get the address of the functions and Variables in the DSP assemble code
by Chengcheng Gou 28 Apr '12

28 Apr '12

hello, I have the problem ,such as how to get the address of the functions and Variables in the DSP assemble code,such as in +; DSP Sniffing task patch +; ---------------------------------------------------------------------------- +; Known symbols +; ---------------------------------------------------------------------------- + + ; Variables +patch_install_fptr .equ 0x3F6B ; Patch install function ptr +dsp_page .equ 0x3FB0 ; Current ndb.d_dsp_page +task_fn_entry .equ 0x4387 + 23 ; Task 23 index in JT_4387 + + ; Functions +a5_setup .equ 0xB12C +dma_queue_setup .equ 0xB74C + +jt4387_exec .equ 0xA9EA + +fq_4320_push .equ 0xAA9F +fq_4330_push .equ 0xAA6C +fq_4340_push .equ 0xAAC3 + Can anyone tell me the way to do that?! thanks!

2 1