- baseband-devel - lists.osmocom.org

Frequency hopping
by Dario Lombardo 27 Apr '12

27 Apr '12

Hello everybody What happens when a mobile station is in a cell that uses hopping, but the mobile locks to that cell (for instance using the function of the engineering menu of a BB)? Is the hopping mandatory or the ms can continue working also without it? Does osmocom support hopping? What are the commands of the mobile interface (if they exist) to show how the hopping is going? Is it possible to lock with osmocom too? Thanks for the answers. Dario.

2 1

Whats the best recommended Sim Card R/W for the SysmoSim Card
by Martin O'Shield 27 Apr '12

27 Apr '12

Hello All, What is the preferred Sim Card Reader/Writer for the SysmoSim Card, A.K.A., the GrCard Sim? And is the following known to work reliably with the SysmoSim Card? SIM Reader kit - v1.0http://www.adafruit.com/products/101I contacted Adafruit.com yesterday and they explained that their device doesn't work on all Sim Cards. Any assistance would be greatly appreciated. Sincerely, Martin

3 2

PLMN Scan Rate when off network
by Kurtis Heimerl 24 Apr '12

24 Apr '12

Hi Baseband, I'm trying to figure out if there's any standard set for how often a handset should scan for signal when out of coverage. I haven't been able to find much, just the following in 3GPP TS 22.011: 3.2.2.2 At switch-on or recovery from lack of coverage If registration cannot be achieved on any PLMN, the UE shall indicate "no service" to the user, wait until a new PLMN is detected, or new location areas of an allowed PLMN are found which are not in the forbidden LA list(s), and then repeat the procedure. When registration cannot be achieved, different (discontinuous) PLMN search schemes may be used in order to minimize the access time while maintaining battery life, e.g. by prioritising the search in favour of BCCH carriers which have a high probability of belonging to an available and allowable PLMN. Sounds like it's up to each manufacturer to just pick a delay? Any other thoughts/intuitions which might help us bound this number? Thanks!

1 0

Osmocom RRLP
by maxfeldman14＠berkeley.edu 23 Apr '12

23 Apr '12

To whom it may concern: Has anyone implemented RRLP request handling in osmocombb's layer 3? We are particularly interested in the transmission of GPS data. Additionally, if anyone has any helpful advice/documentation on the message format which is more detailed or useful than the gsm 04.31 spec we would greatly appreciate it. Thanks you, Max Feldman

1 0

April 25, 7pm / Regular Osmocom meeting in Berlin?
by Harald Welte 23 Apr '12

23 Apr '12

Hi all! This is the announcement for the 2nd incarnation of our bi-weekly Osmocom Berlin meeting. April 25, 7pm @ CCC Berlin, Marienstr. 11, 10113 Berlin The schedule is as follows: 19:00 Introduction into the TETRA base station located @ CCCB For quite some time, there is a full TETRA base station located in the Berlin CCC, consisting of two base radios (BR), a site controller (TSC), an auto-tuning cavity combiner and other equipment. The talk will introduce the architecture of the system and the current status of getting it running. 20:00 Presenting the CC32RS512 / towards an Osmocom Card OS The CC32RS512 is a flash-based smart card controller to which the documentation is available without NDA. This means that we finally are able to implement a Smart Card OS (COS) as free software. 20:30 Informal discussions If you are interested to show up, feel free to do so. There is no registration required. If the initial part is not interesting to you, feel free to join us later at 20:30. The meeting is free as in "free beer", despite no actual free beer being around ;) Regards, Harald -- - Harald Welte <laforge(a)gnumonks.org> http://laforge.gnumonks.org/ ============================================================================ "Privacy in residential applications is a desirable marketing option." (ETSI EN 300 175-7 Ch. A6)

1 0

Basic Set Up For PCS 1900
by rola 21 Apr '12

21 Apr '12

Hi all: I've been on and off trying to set up Osmocom-BB for quite a while now. I've tried using several Cxxx with no luck of being able to lock on to a cell. I shifted to Pirelli_dpl10 hoping to avoid configuration change required of dual-band phones to work with Osmocom-BB but no positive outcome. I'm using Sylvain testing branch with transmit enabled; create mobile config file with PCS1900 and GSM850 as the only bands to be supported. For US Motorola dual band phones c139 and c155, I modified the required section of the rffe file to support PCS1900; and for Pirelli, I made the recommended modification to UART option before being able to communicate with the device. I guess I did all what need to be done for preliminary setting. Layer1 load perfectly but mobile application never work. Sim reader worked perfectly; Sim information was read, mobile app used the previous PLMN information to start power measurement. I was able to get average power of -92dB with Pirelli but while still performing the scanning the result output repeatedly fix prim_pm.c file with value to be overwrite message. I guess the issue has to do with passing the right parameters to layer1 to perform ARFCN scanning in order to obtain power measurement of the available channels. I'm not really sure if there is need to modify any part of layer1 or Rita files before accurate measurement could be done for PCS1900. I'm not that deeply knowledgeable in GSM standard but I can still figure out what to do if any hint is given toward what need to be done before PCS1900 band will work with any osmocom-compatible phone. I know that some people have worked on PCS1900 and GSM850 but there is no information towards what need to be done in terms of specific file to hack to change default GSM900 and DCS1800 bands configurations to GSM850 and PCS1900. I am pretty much sure that If I were in Europe I would by now step up from trying to make Osmocom lock to a serving cell to the point studying the code to work for a specific purpose. I am using the project as part of thesis work to analyze the Um interface and to explain processes that occur between BTS and mobile station. I will so much appreciate it if anyone could be of any help. Thanks. Rasak -- View this message in context: http://baseband-devel.722152.n3.nabble.com/Basic-Set-Up-For-PCS-1900-tp3927… Sent from the baseband-devel mailing list archive at Nabble.com.

1 0

CKSN clarification
by Max 20 Apr '12

20 Apr '12

Hello. CKSN - Ciphering Key Sequence Number is associated with Kc and is a bit trickier than trivial counter. According to GSM 04.08 (p. 278 in v5.3.0 in my case) it's comprised as follows: * 3 bits - actual key sequence (value 111 seems to be reserved) * 1 bit - always 0 * 3 bits - CKSN IEI Could you help me to understand how to properly generate it: - the last bit (8th) is not specified - does it mean it's always 0? - what is CKSN IEI and how do I calculate\use it? - am I right that 3-bit key seq. value is simple counter that I increment with each Kc generation? - what do I do when key seq. reach 6 - start over with 0 again? And of course I'm interested if CKSN-related code is available as part of libosmogsm or some other open source project: the code is always helpful in understanding and I don't have to reinvent the wheel :) best regards, Max.

3 3

Mobile phone to act as RF frequency sesnor and detector
by Winston Ojenge 20 Apr '12

20 Apr '12

Dear all, I lecture at strathmore university, Kenya, East Africa. For my PhD, i need to develop a cell-phone model that senses and recognizes a specific RF frequency from a source. It then submits the value of that frequency by SMS. Is it possible to use the OsmocomBB platform to program such a device using motorola C123? Ojenge

2 7

How to implement HLR lookup free
by Chengcheng Gou 18 Apr '12

18 Apr '12

hello How to implement HLR lookup free ?

4 3

bug report about mobile
by Chengcheng Gou 17 Apr '12

17 Apr '12

I am testing mobile app and when the program exit, it occur the flowing errors: Dropping frame with 85 bit errors LOSS counter for ACCH 31 Dropping frame with 85 bit errors Dropping frame with 86 bit errors Dropping frame with 78 bit errors LOSS counter for ACCH 30 Dropping frame with 79 bit errors Dropping frame with 77 bit errors Dropping frame with 86 bit errors

1 0