baseband-devel

baseband-devel@lists.osmocom.org

2023 discussions

[PATCH] [for upstream ???]: fix linker script for compal_e99 highram
by Denis 'GNUtoo' Carikli 13 May '12

13 May '12

Signed-off-by: Denis 'GNUtoo' Carikli <GNUtoo(a)no-log.org> --- nuttx/configs/compal_e99/nsh_highram/ld.script | 2 +- 1 files changed, 1 insertions(+), 1 deletions(-) diff --git a/nuttx/configs/compal_e99/nsh_highram/ld.script b/nuttx/configs/compal_e99/nsh_highram/ld.script index 7096a61..34ce015 100644 --- a/nuttx/configs/compal_e99/nsh_highram/ld.script +++ b/nuttx/configs/compal_e99/nsh_highram/ld.script @@ -16,7 +16,7 @@ MEMORY LRAM (rw) : ORIGIN = 0x00800000, LENGTH = 0x00020000 TRAM (rw) : ORIGIN = 0x00820000, LENGTH = 0x00020000 /* compal-loaded binary: our unitialized data, stacks, heap */ - IRAM (rw) : ORIGIN = 0x00840000, LENGTH = 0x00010000 + IRAM (rw) : ORIGIN = 0x01000000, LENGTH = 0x011fffff } SECTIONS { -- 1.7.5.4 --nextPart2762333.I70qBvf3Po Content-Disposition: attachment; filename="appconfig" Content-Transfer-Encoding: 7Bit Content-Type: text/x-matlab; charset="UTF-8"; name="appconfig" ############################################################################ # configs/compal_e99/nsh_highram/appconfig # # Copyright (C) 2011 Gregory Nutt. All rights reserved. # Author: Gregory Nutt <spudmonkey(a)racsa.co.cr> # # Redistribution and use in source and binary forms, with or without # modification, are permitted provided that the following conditions # are met: # # 1. Redistributions of source code must retain the above copyright # notice, this list of conditions and the following disclaimer. # 2. Redistributions in binary form must reproduce the above copyright # notice, this list of conditions and the following disclaimer in # the documentation and/or other materials provided with the # distribution. # 3. Neither the name NuttX nor the names of its contributors may be # used to endorse or promote products derived from this software # without specific prior written permission. # # THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS # "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT # LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS # FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE # COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, # INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, # BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS # OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED # AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT # LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN # ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE # POSSIBILITY OF SUCH DAMAGE. # ############################################################################ # NSH shell CONFIGURED_APPS += examples/nsh CONFIGURED_APPS += system/readline CONFIGURED_APPS += nshlib # Path to example in apps/examples #CONFIGURED_APPS += examples/hello CONFIGURED_APPS += vsn/poweroff #CONFIGURED_APPS += examples/ostest CONFIGURED_APPS += examples/nxtext #CONFIGURED_APPS += examples/nxhello #CONFIGURED_APPS += examples/nxlines #CONFIGURED_APPS += examples/nximage --nextPart2762333.I70qBvf3Po Content-Disposition: attachment; filename="defconfig" Content-Transfer-Encoding: 7Bit Content-Type: text/x-matlab; charset="UTF-8"; name="defconfig" ############################################################################ # configs/compal_e99/nsh_highram/defconfig # # Copyright (C) 2007-2012 Gregory Nutt. All rights reserved. # Author: Gregory Nutt <gnutt(a)nuttx.org> # # Redistribution and use in source and binary forms, with or without # modification, are permitted provided that the following conditions # are met: # # 1. Redistributions of source code must retain the above copyright # notice, this list of conditions and the following disclaimer. # 2. Redistributions in binary form must reproduce the above copyright # notice, this list of conditions and the following disclaimer in # the documentation and/or other materials provided with the # distribution. # 3. Neither the name NuttX nor the names of its contributors may be # used to endorse or promote products derived from this software # without specific prior written permission. # # THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS # "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT # LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS # FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE # COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, # INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, # BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS # OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED # AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT # LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN # ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE # POSSIBILITY OF SUCH DAMAGE. # ############################################################################ # # architecture selection # # CONFIG_ARCH - identifies the arch subdirectory and, hence, the # processor architecture. # CONFIG_ARCH_family - for use in C code. This identifies the # particular chip family that the architecture is implemented # in. # CONFIG_ARCH_architecture - for use in C code. This identifies the # specific architecture within the chip familyl. # CONFIG_ARCH_CHIP - Identifies the arch/*/chip subdirectory # CONFIG_ARCH_CHIP_name - For use in C code # CONFIG_ARCH_BOARD - identifies the configs subdirectory and, hence, # the board that supports the particular chip or SoC. # CONFIG_ARCH_BOARD_name - for use in C code # CONFIG_BOARD_LOOPSPERMSEC - for delay loops # CONFIG_ENDIAN_BIG - define if big endian (default is little endian) # CONFIG_ROM_VECTORS - unique to c5471 # CONFIG_DRAM_END - the size of installed DRAM. # Unique to c5471 # CONFIG_ARCH_LEDS - Use LEDs to show state. Unique to c5471. # CONFIG_ARCH_INTERRUPTSTACK - This architecture supports an interrupt # stack. If defined, this symbol is the size of the interrupt # stack in bytes. If not defined, the user task stacks will be # used during interrupt handling. # CONFIG_ARCH_STACKDUMP - Do stack dumps after assertions # CONFIG_ARCH=arm CONFIG_ARCH_ARM=y CONFIG_ARCH_ARM7TDMI=y CONFIG_ARCH_CHIP=calypso CONFIG_ARCH_CHIP_CALYPSO=y CONFIG_ARCH_BOARD=compal_e99 CONFIG_ARCH_BOARD_COMPALE99=y CONFIG_BOARD_LOOPSPERMSEC=1250 CONFIG_ROM_VECTORS=n CONFIG_DRAM_END=0x00840000 CONFIG_ARCH_LEDS=n CONFIG_ARCH_INTERRUPTSTACK=1024 CONFIG_ARCH_STACKDUMP=y # # C5471 specific device driver settings # # CONFIG_SERIAL_IRDA_CONSOLE - selects the IRDA UART for the # console ant ttys0 (default is the modem UART). # CONFIG_UART_*_HWFLOWCONTROL - enables hardware flow control # CONFIG_UART_*_RXBUFSIZE - Characters are buffered as received. # This specific the size of the receive buffer # CONFIG_UART_*_TXBUFSIZE - Characters are buffered before # being sent. This specific the size of the transmit buffer # CONFIG_UART_*_BAUD - The configure BAUD of the UART. Must be # CONFIG_UART_*_BITS - The number of bits. Must be either 7 or 8. # CONFIG_UART_*_PARTIY - 0=no parity, 1=odd parity, 2=even parity # CONFIG_UART_*_2STOP - Two stop bits # CONFIG_SERIAL_IRDA_CONSOLE=n CONFIG_UART_IRDA_HWFLOWCONTROL=n CONFIG_UART_MODEM_HWFLOWCONTROL=n CONFIG_UART_IRDA_RXBUFSIZE=256 CONFIG_UART_MODEM_RXBUFSIZE=256 CONFIG_UART_IRDA_TXBUFSIZE=256 CONFIG_UART_MODEM_TXBUFSIZE=256 CONFIG_UART_IRDA_BAUD=115200 CONFIG_UART_MODEM_BAUD=115200 CONFIG_UART_IRDA_BITS=8 CONFIG_UART_MODEM_BITS=8 CONFIG_UART_IRDA_PARITY=0 CONFIG_UART_MODEM_PARITY=0 CONFIG_UART_IRDA_2STOP=0 CONFIG_UART_MODEM_2STOP=0 # # C5471 Ethernet Driver settings CONFIG_C5471_NET_STATS=n ETHERNET_PHY_LU3X31T_T64=1 ETHERNET_PHY_AC101L=2 CONFIG_C5471_ETHERNET_PHY=ETHERNET_PHY_LU3X31T_T64 CONFIG_NET_C5471_AUTONEGOTIATION=y CONFIG_NET_C5471_BASET100=n CONFIG_NET_C5471_BASET10=n # # General build options # # CONFIG_RRLOAD_BINARY - make the rrload binary format used with # BSPs from www.ridgerun.com using the tools/mkimage.sh script # CONFIG_INTELHEX_BINARY - make the Intel HEX binary format # used with many different loaders using the GNU objcopy program # Should not be selected if you are not using the GNU toolchain. # CONFIG_RAW_BINARY - make a raw binary format file used with many # different loaders using the GNU objcopy program. This option # should not be selected if you are not using the GNU toolchain. # CONFIG_HAVE_LIBM - toolchain supports libm.a # CONFIG_RRLOAD_BINARY=n CONFIG_INTELHEX_BINARY=n CONFIG_RAW_BINARY=y CONFIG_HAVE_LIBM=n # # General OS setup # # CONFIG_APPS_DIR - Identifies the relative path to the directory # that builds the application to link with NuttX. Default: ../apps # CONFIG_DEBUG - enables built-in debug options # CONFIG_DEBUG_VERBOSE - enables verbose debug output # CONFIG_DEBUG_SYMBOLS - build without optimization and with # debug symbols (needed for use with a debugger). # CONFIG_MM_REGIONS - If the architecture includes multiple # regions of memory to allocate from, this specifies the # number of memory regions that the memory manager must # handle and enables the API mm_addregion(start, end); # CONFIG_ARCH_LOWPUTC - architecture supports low-level, boot # time console output # CONFIG_TICKS_PER_MSEC - The default system timer is 100Hz # or TICKS_PER_MSEC=10. This setting may be defined to # inform NuttX that the processor hardware is providing # system timer interrupts at some interrupt interval other # than 10 msec. # CONFIG_RR_INTERVAL - The round robin timeslice will be set # this number of milliseconds; Round robin scheduling can # be disabled by setting this value to zero. # CONFIG_SCHED_INSTRUMENTATION - enables instrumentation in # scheduler to monitor system performance # CONFIG_TASK_NAME_SIZE - Spcifies that maximum size of a # task name to save in the TCB. Useful if scheduler # instrumentation is selected. Set to zero to disable. # CONFIG_START_YEAR, CONFIG_START_MONTH, CONFIG_START_DAY - # Used to initialize the internal time logic. # CONFIG_JULIAN_TIME - Enables Julian time conversions # CONFIG_DEV_CONSOLE - Set if architecture-specific logic # provides /dev/console. Enables stdout, stderr, stdin. # CONFIG_DEV_LOWCONSOLE - Use the simple, low-level serial console # driver (minimul support) # CONFIG_MUTEX_TYPES: Set to enable support for recursive and # errorcheck mutexes. Enables pthread_mutexattr_settype(). # CONFIG_PRIORITY_INHERITANCE : Set to enable support for priority # inheritance on mutexes and semaphores. # CONFIG_SEM_PREALLOCHOLDERS: This setting is only used if priority # inheritance is enabled. It defines the maximum number of # different threads (minus one) that can take counts on a # semaphore with priority inheritance support. This may be # set to zero if priority inheritance is disabled OR if you # are only using semaphores as mutexes (only one holder) OR # if no more than two threads participate using a counting # semaphore. # CONFIG_SEM_NNESTPRIO. If priority inheritance is enabled, # then this setting is the maximum number of higher priority # threads (minus 1) than can be waiting for another thread # to release a count on a semaphore. This value may be set # to zero if no more than one thread is expected to wait for # a semaphore. # CONFIG_FDCLONE_DISABLE. Disable cloning of all file descriptors # by task_create() when a new task is started. If set, all # files/drivers will appear to be closed in the new task. # CONFIG_FDCLONE_STDIO. Disable cloning of all but the first # three file descriptors (stdin, stdout, stderr) by task_create() # when a new task is started. If set, all files/drivers will # appear to be closed in the new task except for stdin, stdout, # and stderr. # CONFIG_SDCLONE_DISABLE. Disable cloning of all socket # desciptors by task_create() when a new task is started. If # set, all sockets will appear to be closed in the new task. # CONFIG_NXFLAT. Enable support for the NXFLAT binary format. # This format will support execution of NuttX binaries located # in a ROMFS filesystem (see examples/nxflat). # #CONFIG_APPS_DIR= CONFIG_DEBUG=n CONFIG_DEBUG_VERBOSE=n CONFIG_DEBUG_SYMBOLS=n CONFIG_MM_REGIONS=2 CONFIG_ARCH_LOWPUTC=y CONFIG_RR_INTERVAL=200 CONFIG_SCHED_INSTRUMENTATION=n CONFIG_TASK_NAME_SIZE=0 CONFIG_START_YEAR=2007 CONFIG_START_MONTH=2 CONFIG_START_DAY=13 CONFIG_JULIAN_TIME=n CONFIG_DEV_CONSOLE=y CONFIG_DEV_LOWCONSOLE=n CONFIG_MUTEX_TYPES=n CONFIG_PRIORITY_INHERITANCE=n CONFIG_SEM_PREALLOCHOLDERS=0 CONFIG_SEM_NNESTPRIO=0 CONFIG_FDCLONE_DISABLE=n CONFIG_FDCLONE_STDIO=n CONFIG_SDCLONE_DISABLE=y CONFIG_NXFLAT=n # # The following can be used to disable categories of # APIs supported by the OS. If the compiler supports # weak functions, then it should not be necessary to # disable functions unless you want to restrict usage # of those APIs. # # There are certain dependency relationships in these # features. # # o mq_notify logic depends on signals to awaken tasks # waiting for queues to become full or empty. # o pthread_condtimedwait() depends on signals to wake # up waiting tasks. # CONFIG_DISABLE_CLOCK=n CONFIG_DISABLE_POSIX_TIMERS=n CONFIG_DISABLE_PTHREAD=n CONFIG_DISABLE_SIGNALS=n CONFIG_DISABLE_MQUEUE=y CONFIG_DISABLE_MOUNTPOINT=n CONFIG_DISABLE_ENVIRON=n CONFIG_STDIO_LINE_BUFFER=y CONFIG_DISABLE_POLL=y # # FAT filesystem configuration # CONFIG_FS_FAT - Enable FAT filesystem support # CONFIG_FAT_SECTORSIZE - Max supported sector size # CONFIG_FS_ROMFS - Enable ROMFS filesystem support CONFIG_FS_FAT=n CONFIG_FS_ROMFS=n # # Misc libc settings # # CONFIG_NOPRINTF_FIELDWIDTH - sprintf-related logic is a # little smaller if we do not support fieldwidthes # CONFIG_NOPRINTF_FIELDWIDTH=n # # Allow for architecture optimized implementations # # The architecture can provide optimized versions of the # following to improve sysem performance # CONFIG_ARCH_MEMCPY=n CONFIG_ARCH_MEMCMP=n CONFIG_ARCH_MEMMOVE=n CONFIG_ARCH_MEMSET=n CONFIG_ARCH_STRCMP=n CONFIG_ARCH_STRCPY=n CONFIG_ARCH_STRNCPY=n CONFIG_ARCH_STRLEN=n CONFIG_ARCH_STRNLEN=n CONFIG_ARCH_BZERO=n # # Sizes of configurable things (0 disables) # # CONFIG_MAX_TASKS - The maximum number of simultaneously # active tasks. This value must be a power of two. # CONFIG_MAX_TASK_ARGS - This controls the maximum number of # of parameters that a task may receive (i.e., maxmum value # of 'argc') # CONFIG_NPTHREAD_KEYS - The number of items of thread- # specific data that can be retained # CONFIG_NFILE_DESCRIPTORS - The maximum number of file # descriptors (one for each open) # CONFIG_NFILE_STREAMS - The maximum number of streams that # can be fopen'ed # CONFIG_NAME_MAX - The maximum size of a file name. # CONFIG_STDIO_BUFFER_SIZE - Size of the buffer to allocate # on fopen. (Only if CONFIG_NFILE_STREAMS > 0) # CONFIG_NUNGET_CHARS - Number of characters that can be # buffered by ungetc() (Only if CONFIG_NFILE_STREAMS > 0) # CONFIG_PREALLOC_MQ_MSGS - The number of pre-allocated message # structures. The system manages a pool of preallocated # message structures to minimize dynamic allocations # CONFIG_MQ_MAXMSGSIZE - Message structures are allocated with # a fixed payload size given by this settin (does not include # other message structure overhead. # CONFIG_MAX_WDOGPARMS - Maximum number of parameters that # can be passed to a watchdog handler # CONFIG_PREALLOC_WDOGS - The number of pre-allocated watchdog # structures. The system manages a pool of preallocated # watchdog structures to minimize dynamic allocations # CONFIG_PREALLOC_TIMERS - The number of pre-allocated POSIX # timer structures. The system manages a pool of preallocated # timer structures to minimize dynamic allocations. Set to # zero for all dynamic allocations. # CONFIG_MAX_TASKS=16 CONFIG_MAX_TASK_ARGS=4 CONFIG_NPTHREAD_KEYS=4 CONFIG_NFILE_DESCRIPTORS=8 CONFIG_NFILE_STREAMS=8 CONFIG_NAME_MAX=32 CONFIG_STDIO_BUFFER_SIZE=1024 CONFIG_NUNGET_CHARS=2 CONFIG_PREALLOC_MQ_MSGS=0 CONFIG_MQ_MAXMSGSIZE=32 CONFIG_MAX_WDOGPARMS=4 CONFIG_PREALLOC_WDOGS=8 CONFIG_PREALLOC_TIMERS=8 # SPI driver # CONFIG_SPI_OWNBUS - Set if there is only one active device # on the SPI bus. No locking or SPI configuration will be performed. # It is not necessary for clients to lock, re-configure, etc.. # CONFIG_SPI_EXCHANGE - Driver supports a single exchange method # (vs a recvblock() and sndblock ()methods) # CONFIG_SPI_OWNBUS=y CONFIG_SPI_EXCHANGE=y # # TCP/IP and UDP support via uIP # CONFIG_NET - Enable or disable all network features # CONFIG_NET_IPv6 - Build in support for IPv6 # CONFIG_NSOCKET_DESCRIPTORS - Maximum number of socket descriptors per task/thread. # CONFIG_NET_SOCKOPTS - Enable or disable support for socket options # CONFIG_NET_BUFSIZE - uIP buffer size # CONFIG_NET_TCP - TCP support on or off # CONFIG_NET_TCP_CONNS - Maximum number of TCP connections (all tasks) # CONFIG_NET_TCP_READAHEAD_BUFSIZE - Size of TCP read-ahead buffers # CONFIG_NET_NTCP_READAHEAD_BUFFERS - Number of TCP read-ahead buffers (may be zero) # CONFIG_NET_TCPBACKLOG - Incoming connections pend in a backlog until # accept() is called. The size of the backlog is selected when listen() is called. # CONFIG_NET_MAX_LISTENPORTS - Maximum number of listening TCP ports (all tasks) # CONFIG_NET_UDP - UDP support on or off # CONFIG_NET_UDP_CHECKSUMS - UDP checksums on or off # CONFIG_NET_UDP_CONNS - The maximum amount of concurrent UDP connections # CONFIG_NET_ICMP - ICMP ping response support on or off # CONFIG_NET_ICMP_PING - ICMP ping request support on or off # CONFIG_NET_PINGADDRCONF - Use "ping" packet for setting IP address # CONFIG_NET_STATISTICS - uIP statistics on or off # CONFIG_NET_RECEIVE_WINDOW - The size of the advertised receiver's window # CONFIG_NET_ARPTAB_SIZE - The size of the ARP table # CONFIG_NET_BROADCAST - Broadcast support # CONFIG_NET_FWCACHE_SIZE - number of packets to remember when looking for duplicates # CONFIG_NET=n CONFIG_NET_IPv6=n CONFIG_NSOCKET_DESCRIPTORS=8 CONFIG_NET_SOCKOPTS=y CONFIG_NET_BUFSIZE=420 CONFIG_NET_TCP=y CONFIG_NET_TCP_CONNS=8 CONFIG_NET_NTCP_READAHEAD_BUFFERS=32 CONFIG_NET_TCPBACKLOG=n CONFIG_NET_MAX_LISTENPORTS=8 CONFIG_NET_UDP=y CONFIG_NET_UDP_CHECKSUMS=y #CONFIG_NET_UDP_CONNS=4 CONFIG_NET_ICMP=y CONFIG_NET_ICMP_PING=n #CONFIG_NET_PINGADDRCONF=0 CONFIG_NET_STATISTICS=y #CONFIG_NET_RECEIVE_WINDOW= #CONFIG_NET_ARPTAB_SIZE=8 CONFIG_NET_BROADCAST=n #CONFIG_NET_FWCACHE_SIZE=2 # # UIP Network Utilities # CONFIG_NET_DHCP_LIGHT - Reduces size of DHCP # CONFIG_NET_RESOLV_ENTRIES - Number of resolver entries CONFIG_NET_DHCP_LIGHT=n CONFIG_NET_RESOLV_ENTRIES=4 # # Settings for examples/uip CONFIG_EXAMPLE_UIP_NOMAC=y CONFIG_EXAMPLE_UIP_IPADDR=(10<<24|0<<16|0<<8|2) CONFIG_EXAMPLE_UIP_DRIPADDR=(10<<24|0<<16|0<<8|1) CONFIG_EXAMPLE_UIP_NETMASK=(255<<24|255<<16|255<<8|0) CONFIG_EXAMPLE_UIP_DHCPC=n # # Settings for examples/nettest CONFIG_EXAMPLE_NETTEST_SERVER=n CONFIG_EXAMPLE_NETTEST_PERFORMANCE=n CONFIG_EXAMPLE_NETTEST_NOMAC=y CONFIG_EXAMPLE_NETTEST_IPADDR=(10<<24|0<<16|0<<8|2) CONFIG_EXAMPLE_NETTEST_DRIPADDR=(10<<24|0<<16|0<<8|1) CONFIG_EXAMPLE_NETTEST_NETMASK=(255<<24|255<<16|255<<8|0) CONFIG_EXAMPLE_NETTEST_CLIENTIP=(10<<24|0<<16|0<<8|1) # # Settings for examples/nsh CONFIG_NSH_CONSOLE=y CONFIG_NSH_TELNET=n CONFIG_NSH_IOBUFFER_SIZE=512 CONFIG_NSH_CMD_SIZE=40 CONFIG_NSH_STACKSIZE=4096 CONFIG_NSH_DHCPC=n CONFIG_NSH_NOMAC=y CONFIG_NSH_IPADDR=(10<<24|0<<16|0<<8|2) CONFIG_NSH_DRIPADDR=(10<<24|0<<16|0<<8|1) CONFIG_NSH_NETMASK=(255<<24|255<<16|255<<8|0) CONFIG_NSH_BUILTIN_APPS=y # # LCD Drivers settings CONFIG_NX_LCDDRIVER=y CONFIG_LCD_SSD1783=y # # Graphics CONFIG_NX=y CONFIG_NXCONSOLE=n CONFIG_NX_KBD=y CONFIG_LCD_MAXPOWER=1 CONFIG_NX_BLOCKING=y CONFIG_NX_DISABLE_1BPP=y CONFIG_NX_DISABLE_2BPP=y CONFIG_NX_DISABLE_4BPP=y CONFIG_NX_DISABLE_8BPP=n CONFIG_NX_DISABLE_16BPP=y CONFIG_NX_DISABLE_32BPP=y CONFIG_NXCONSOLE_BPP=8 CONFIG_NXCONSOLE_NOGETRUN=y CONFIG_NXFONT_SANS17X22=y CONFIG_NX_MULTIUSER=n CONFIG_EXAMPLES_NXTEXT_BPP=8 CONFIG_EXAMPLES_NXTEXT_DEVNO=0 # # Settings for examples/hello CONFIG_EXAMPLES_HELLO_BUILTIN=y CONFIG_EXAMPLES_NXHELLO_BUILTIN=y CONFIG_EXAMPLES_NXTEXT_BUILTIN=y CONFIG_EXAMPLES_NXIMAGE_BUILTIN=y CONFIG_EXAMPLES_NXLINES_BUILTIN=y CONFIG_EXAMPLES_NXLINES_EXTERNINIT=y CONFIG_EXAMPLES_NXHELLO_EXTERNINIT=y CONFIG_EXAMPLES_NXTEXT_EXTERNINIT=y CONFIG_EXAMPLES_NXIMAGE_EXTERNINIT=y # # Settings for examples/wget # CONFIG_EXAMPLE_WGET_URL - The URL of the file to get # CONFIG_EXAMPLE_WGET_NOMAC - (May be defined to use software assigned MAC) # CONFIG_EXAMPLE_WGET_IPADDR - Target IP address # CONFIG_EXAMPLE_WGET_DRIPADDR - Default router IP addess # CONFIG_EXAMPLE_WGET_NETMASK - Network mask CONFIG_EXAMPLE_WGET_URL="http://www.nuttx.org/index.html" CONFIG_EXAMPLE_WGET_NOMAC=y CONFIG_EXAMPLE_WGET_IPADDR=(10L<<24|0L<<16|0L<<8|2L) CONFIG_EXAMPLE_WGET_DRIPADDR=(10L<<24|0L<<16|0L<<8|1L) CONFIG_EXAMPLE_WGET_NETMASK=(255L<<24|255L<<16|255L<<8|0L) # # Stack and heap information # # CONFIG_BOOT_RUNFROMFLASH - Some configurations support XIP # operation from FLASH but must copy initialized .data sections to RAM. # CONFIG_BOOT_COPYTORAM - Some configurations boot in FLASH # but copy themselves entirely into RAM for better performance. # CONFIG_CUSTOM_STACK - The up_ implementation will handle # all stack operations outside of the nuttx model. # CONFIG_STACK_POINTER - The initial stack pointer (arm7tdmi only) # CONFIG_IDLETHREAD_STACKSIZE - The size of the initial stack. # This is the thread that (1) performs the inital boot of the system up # to the point where user_start() is spawned, and (2) there after is the # IDLE thread that executes only when there is no other thread ready to # run. # CONFIG_USERMAIN_STACKSIZE - The size of the stack to allocate # for the main user thread that begins at the user_start() entry point. # CONFIG_PTHREAD_STACK_MIN - Minimum pthread stack size # CONFIG_PTHREAD_STACK_DEFAULT - Default pthread stack size # CONFIG_HEAP_BASE - The beginning of the heap # CONFIG_HEAP_SIZE - The size of the heap # CONFIG_BOOT_RUNFROMFLASH=n CONFIG_BOOT_COPYTORAM=n CONFIG_CUSTOM_STACK=n #CONFIG_STACK_POINTER CONFIG_IDLETHREAD_STACKSIZE=4096 CONFIG_USERMAIN_STACKSIZE=4096 CONFIG_PTHREAD_STACK_MIN=256 CONFIG_PTHREAD_STACK_DEFAULT=4096 CONFIG_HEAP_BASE= CONFIG_HEAP_SIZE= # Application configuration CONFIG_APPS_DIR="../apps" --nextPart2762333.I70qBvf3Po--

1 0

jtag trouble j100i
by Mathias K. 09 May '12

09 May '12

Hello, i try to connect the j100i with the latest openocd (git) but there is always something wrong with the embedded ice module. My configuration script is based on openocd_calypso.cfg and the calypso_magic.svf. The main difference i can see is the idcode and the irlen. My changes in the script looks like this: set _CPUTAPID 0xf9001807 jtag newtap $_CHIPNAME dsp -expected-id 0x00000000 -irlen 5 jtag newtap $_CHIPNAME arm -irlen 4 -ircapture 0x1 -irmask 0xf -expected-id $_CPUTAPID This changes are based on some appended svf scripts that simple scan the jtag chain to get more informations. The jtag_idcodes.svf returns the shifted idcodes like this: SDR 32 TDI(ffffffff); length = 32 TDI = 0xFFFFFFFF TDO read = 0xF200300E SDR 32 TDI(ffffffff); length = 32 TDI = 0xFFFFFFFF TDO read = 0xFFFFFFFF The jtag_devices.svf told me the device count and the possible ir register count/length: SIR 32 TDI(ffffffff); length = 32 TDI = 0xFFFFFFFF TDO read = 0xFFFFFE25 TDO: 11...11000100101 Looks like 3 ir registers with 4,3 and 2 bit length SDR 32 TDI(ffffffff); length = 32 TDI = 0xFFFFFFFF TDO read = 0xFFFFFFFC TDO: 11...1100 Looks like 2 devices But every access to the embedded ice registers (they are located in the internal scan chain 2) result in random (most time zero) values for the comms ctrl register and a cpu halt state. Is there anything wrong? Is there a different "magic" 0x0b jtag command or argument for this kind of cpu? Thanks & Regards, Mathias

2 4

Re: How to send a sms using BB
by Henk 09 May '12

09 May '12

It works Chengcheng Gou <gouchengcheng(a)gmail.com>schreef: >Hi, >anyone did try it? >

1 0

How to send a sms using BB
by Chengcheng Gou 09 May '12

09 May '12

Hi, anyone did try it?

1 0

Re: Sagem OT-290 trace phone / GSMTAP integration
by Tyson Key 08 May '12

08 May '12

Hi list, It's my first time posting here, and I've just subscribed - so apologies for totally wrecking archive threading. I've just received a copy of the e-mail regarding the OT-290, thanks to Andrew Back; and I'm wondering it's possible to discuss the feasibility of implementing this functionality with Harald - since it doesn't seem to have generated much interest from others, and I'm "fortunate" enough to live in a small British town without EDGE coverage (which should make it easier to test GPRS-related tracing functionality). Although I'm unfamiliar with how things work in Osmocom, I've previously worked on Wireshark dissectors for USB-encapsulated AT commands, and various NFC/smartcard-related protocols (PN532, FeliCa and MiFare); and am also familiar with Nokia's proprietary ISI baseband protocol, and parts of ETSI's GSM/UMTS specifications - so this sort of stuff isn't totally alien to me. I'm also currently studying Computer Science as an undergraduate (at the University of Bradford) - but I should be able to make time to work on this. Thanks, Tyson. -- Fight Internet Censorship! http://www.eff.org http://vmlemon.wordpress.com | Twitter/FriendFeed/Skype: vmlemon | 00447934365844

3 2

[PATCH] Adding the manufacturer id of STMicroelectronics (try 2)
by Christian Inci 07 May '12

07 May '12

For supporting the flash on a Motorola C118. Note: Flashing rssi on it worked fine. Signed-off-by: Christian Inci <chris.pcguy.inci(a)gmail.com>

2 1

key generation on SIM failed (cause 2)
by Alojzij Sinur 07 May '12

07 May '12

Hi, I have a question. When using osmocombb with C118, we are getting error when SIM tries to authenticate itself to the network. Here are the messages: <0005> gsm48_mm.c:3902 (ms 1) Received 'RR_DATA_IND' from RR in state location updating initiated (sapi 0) <0005> gsm48_mm.c:4091 (ms 1) Received 'MT_MM_AUTH_REQ' in MM state location updating initiated <0005> gsm48_mm.c:1637 AUTHENTICATION REQUEST (seq 2) <0005> subscriber.c:955 Generating KEY at SIM <000f> sim.c:209 got new job: SIM_JOB_RUN_GSM_ALGO (handle=00000006) <000f> sim.c:697 go MF <000f> sim.c:241 SELECT (file=0x3f00) <000f> sim.c:187 sending APDU (class 0xa0, ins 0xa4) <000f> sim.c:876 received APDU (len=0 sw1=0x00 sw2=0x00) <000f> sim.c:952 command failed <000f> sim.c:151 sending result to callback function (type=1) <0005> subscriber.c:990 key generation on SIM failed (cause 2) SIM is new. It works if you start phone without osmocom. And It also works if you start without osmocom and when SIM logs into network you restart the phone with osmocom. We tried several new cards and there was always same result. There is also no PIN set up (SIM is not locked). We tried with USIM. When we try old cards (>2 years old) osmocom works without problem. Have you ever encountered this kind of trouble? Is there any fix for it? Thank you. Regards, Alojzij

4 9

Sagem OT-290 trace phone / GSMTAP integration
by Harald Welte 07 May '12

07 May '12

Hi all! Thanks to a generous donor, we have received a couple of OT-290 trace phones. These are commercial products intended for taking L2/L3 air interface traces. If you've read any of the fabulous GSM papers by Prof. Dr.-Ing. Joachim Goeller: The OT-phones is what he used to generate all his traces. The majority of what those phones can do is now also possible with OsmocomBB. However, OT-290 support GPRS tracing/testing - for CS-1 throguh CS-4. I would be willing to give away one of the two remaining OT-290 (for free) to anyone who would in return commit to developing a GSMTAP interface for it. The message format on the serial UART between phone and PC is documented (PDF documentation by Sagem included with the phones). So based on this documentation and an OT-290 phone, it should be possible to write a small command-line program that receives the GSM/GPRS messages from the OT-290 and sends them via GSMTAP into wireshark. The result would then be similar to what http://cgit.osmocom.org/cgit/dct3-gsmtap/ is for DCT-3 phones. If you're interested, please respond to this message. Please don't apply for the phone if you are not able to find the required time and interest for actually doing the GSMTAP integration. Thanks! -- - Harald Welte <laforge(a)gnumonks.org> http://laforge.gnumonks.org/ ============================================================================ "Privacy in residential applications is a desirable marketing option." (ETSI EN 300 175-7 Ch. A6)

2 2

Adding the manufacturer id of STMicroelectronics
by Christian Inci 06 May '12

06 May '12

For supporting the flash on a Motorola C118. Note: Flashing rssi on it worked fine. Signed-off-by: Christian Inci <chris.pcguy.inci(a)gmail.com> --- src/target/firmware/flash/cfi_flash.c | 4 ++-- 1 files changed, 2 insertions(+), 2 deletions(-) diff --git a/src/target/firmware/flash/cfi_flash.c b/src/target/firmware/flash/cfi_flash.c index 69369d5..8ecd206 100644 --- a/src/target/firmware/flash/cfi_flash.c +++ b/src/target/firmware/flash/cfi_flash.c @@ -71,6 +71,7 @@ struct cfi_query { /* manufacturer ids */ enum cfi_manuf { + CFI_MANUF_ST = 0x0020, CFI_MANUF_INTEL = 0x0089, }; @@ -532,8 +533,7 @@ int flash_init(flash_t * flash, void *base_addr) if (res) { return res; } - if (m_id != CFI_MANUF_INTEL) { - /* we only support intel devices */ + if (m_id != CFI_MANUF_INTEL && m_id != CFI_MANUF_ST) { return -ENOTSUP; } -- 1.7.8.6 --------------090106030808000805030408--

1 0

[PATCH] Adding the manufacturer id of STMicroelectronics (resend)
by Christian Inci 06 May '12

06 May '12

For supporting the flash on a Motorola C118. Signed-off-by: Christian Inci <chris.pcguy.inci(a)gmail.com>

2 1

Jump to page:

2026

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

baseband-devel