baseband-devel July 2014

baseband-devel@lists.osmocom.org

20 participants
32 discussions

Location update problems on Motorola C118
by Maciej Grela 12 Nov '14

12 Nov '14

Hi, I'm trying to run the latest osmocom-bb git on a Motorola C118 phone. After a minor problem with the build (as you may've noticed in the patch I've sent). I got to the point of successfuly running layer1 on the phone and the mobile app on the PC (I have also enabled TX). The process seems to be stuck on trying to perform a location update. The status of the ms is always either: show ms MS '1' is up, MM connection active IMEI: 000000000000000 IMEISV: 0000000000000000 IMEI generation: fixed automatic network selection state: A1 trying RPLMN MCC=104 MNC=002 (104, 002) cell selection state: connected mode 1 ARFCN=19 MCC=104 MNC=002 LAC=0xb00f CELLID=0x4fd9 (104, 002) radio ressource layer state: connection pending mobility management layer state: wait for RR connection (location updating) OsmocomBB> or show ms MS '1' is up, service is limited (pending) IMEI: 000000000000000 IMEISV: 0000000000000000 IMEI generation: fixed automatic network selection state: A1 trying RPLMN MCC=104 MNC=002 (104, 002) cell selection state: C3 camped normally ARFCN=19 MCC=104 MNC=002 LAC=0xb00f CELLID=0x4fd9 (104, 002) radio ressource layer state: idle mobility management layer state: MM idle, attempting to update OsmocomBB> I think, that because of this I can't make any calls or send sms (all the requests are being rejected): OsmocomBB# call 1 <X> call 1 <X> OsmocomBB# % (MS 1) % Call has been rejected The log information from mobile when it's trying to do a location update is show below: <000b> gsm48_rr.c:2174 PAGING REQUEST 1 <000b> gsm48_rr.c:2141 IMSI 260021964220249 (not for us) <000b> gsm48_rr.c:2132 TMSI fd82a501 (not for us) <000e> gsm48_mm.c:344 Location update retry <0005> gsm48_mm.c:345 timer T3211 (loc. upd. retry delay) has fired <0005> gsm48_mm.c:4311 (ms 1) Received 'MM_EVENT_TIMEOUT_T3211' event in state MM IDLE, attempting to update <000e> gsm48_mm.c:2199 Perform location update (MCC 104, MNC 002 LAC 0xb00f) <0005> gsm48_mm.c:2333 LOCATION UPDATING REQUEST <0005> gsm48_mm.c:2355 using LAI (mcc 104 mnc 002 lac 0xb00f) <0005> gsm48_mm.c:2363 using TMSI 0x28a3d62e <0005> gsm48_mm.c:914 new state MM IDLE, attempting to update -> wait for RR connection (location updating) <0001> gsm48_rr.c:5428 (ms 1) Message 'RR_EST_REQ' received in state idle (sapi 0) <000e> gsm48_rr.c:1318 Establish radio link due to mobility management request <0003> gsm322.c:4037 (ms 1) Event 'EVENT_LEAVE_IDLE' for Cell selection in state 'C3 camped normally' <0003> gsm322.c:823 new state 'C3 camped normally' -> 'connected mode 1' <0003> gsm322.c:3653 Going to camping (normal) ARFCN 19. <0003> gsm322.c:463 Sync to ARFCN=19 rxlev=-74 (Sysinfo, ccch mode NON-COMB) <0001> gsm48_rr.c:366 new state idle -> connection pending <0001> gsm48_rr.c:1465 CHANNEL REQUEST: 00 (Location Update with NECI) <0003> gsm322.c:2938 Channel synched. (ARFCN=19, snr=16, BSIC=17) <0001> gsm322.c:2959 using DSC of 90 <0003> gsm48_rr.c:4816 Channel provides data. <0001> gsm48_rr.c:1601 RANDOM ACCESS (requests left 5) <0001> gsm48_rr.c:1658 RANDOM ACCESS (Tx-integer 50 combined no S(lots) 0 ra 0x0e) <0001> gsm48_rr.c:1697 Use MS-TXPWR-MAX-CCH power value 5 (33 dBm) <0001> gsm48_rr.c:2170 PAGING ignored, we are not camping. <0001> gsm48_rr.c:1601 RANDOM ACCESS (requests left 4) <0001> gsm48_rr.c:1658 RANDOM ACCESS (Tx-integer 50 combined no S(lots) 55 ra 0x07) <0001> gsm48_rr.c:1697 Use MS-TXPWR-MAX-CCH power value 5 (33 dBm) <0001> gsm48_rr.c:2450 IMMEDIATE ASSIGNMENT: <0001> gsm48_rr.c:2462 (ta 2/1107m ra 0x75 chan_nr 0x0a MAIO 0 HSN 38 TS 2 SS 0 TSC 0) <0001> gsm48_rr.c:2503 Request, but not for us. <0001> gsm48_rr.c:2450 IMMEDIATE ASSIGNMENT: <0001> gsm48_rr.c:2462 (ta 2/1107m ra 0x75 chan_nr 0x0a MAIO 0 HSN 38 TS 2 SS 0 TSC 0) <0001> gsm48_rr.c:2503 Request, but not for us. <0001> gsm48_rr.c:2170 PAGING ignored, we are not camping. <0001> gsm48_rr.c:2170 PAGING ignored, we are not camping. <0001> gsm48_rr.c:673 MON: f=19 lev=-78 snr= 0 ber= 0 LAI=104 002 b00f ID=4fd9 <0001> gsm48_rr.c:2170 PAGING ignored, we are not camping. <0001> gsm48_rr.c:1601 RANDOM ACCESS (requests left 3) <0001> gsm48_rr.c:1658 RANDOM ACCESS (Tx-integer 50 combined no S(lots) 55 ra 0x0f) <0001> gsm48_rr.c:1697 Use MS-TXPWR-MAX-CCH power value 5 (33 dBm) <0001> gsm48_rr.c:2170 PAGING ignored, we are not camping. <0001> gsm48_rr.c:1601 RANDOM ACCESS (requests left 2) <0001> gsm48_rr.c:1658 RANDOM ACCESS (Tx-integer 50 combined no S(lots) 55 ra 0x01) <0001> gsm48_rr.c:1697 Use MS-TXPWR-MAX-CCH power value 5 (33 dBm) <0001> gsm48_rr.c:2450 IMMEDIATE ASSIGNMENT: <0001> gsm48_rr.c:2473 (ta 1/553m ra 0x18 chan_nr 0x59 ARFCN 19 TS 1 SS 3 TSC 1) <0001> gsm48_rr.c:2503 Request, but not for us. <0001> gsm48_rr.c:2450 IMMEDIATE ASSIGNMENT: <0001> gsm48_rr.c:2473 (ta 1/553m ra 0x18 chan_nr 0x59 ARFCN 19 TS 1 SS 3 TSC 1) <0001> gsm48_rr.c:2503 Request, but not for us. <0001> gsm48_rr.c:2170 PAGING ignored, we are not camping. <0001> gsm48_rr.c:1601 RANDOM ACCESS (requests left 1) <0001> gsm48_rr.c:1658 RANDOM ACCESS (Tx-integer 50 combined no S(lots) 55 ra 0x0a) <0001> gsm48_rr.c:1697 Use MS-TXPWR-MAX-CCH power value 5 (33 dBm) <0001> gsm48_rr.c:2170 PAGING ignored, we are not camping. <0001> gsm48_rr.c:2170 PAGING ignored, we are not camping. <0001> gsm48_rr.c:673 MON: f=19 lev=-78 snr= 0 ber= 1 LAI=104 002 b00f ID=4fd9 <0001> gsm48_rr.c:2170 PAGING ignored, we are not camping. <0001> gsm48_rr.c:1601 RANDOM ACCESS (requests left 0) <0001> gsm48_rr.c:1605 Done with sending RANDOM ACCESS bursts <0001> gsm48_rr.c:836 starting T3126 with 5.000 seconds <0001> gsm48_rr.c:2170 PAGING ignored, we are not camping. <0001> gsm48_rr.c:2225 PAGING ignored, we are not camping. <0001> gsm48_rr.c:2170 PAGING ignored, we are not camping. <0001> gsm48_rr.c:2170 PAGING ignored, we are not camping. <0001> gsm48_rr.c:2170 PAGING ignored, we are not camping. <0001> gsm48_rr.c:2170 PAGING ignored, we are not camping. <0001> gsm48_rr.c:673 MON: f=19 lev=-78 snr= 0 ber= 0 LAI=104 002 b00f ID=4fd9 <0001> gsm48_rr.c:2450 IMMEDIATE ASSIGNMENT: <0001> gsm48_rr.c:2473 (ta 2/1107m ra 0x0a chan_nr 0x41 ARFCN 19 TS 1 SS 0 TSC 1) <0001> gsm48_rr.c:2393 request 0a matches but not frame number (IMM.ASS fn=22,6,30 != RACH fn=22,5,25) <0001> gsm48_rr.c:2503 Request, but not for us. <0001> gsm48_rr.c:2170 PAGING ignored, we are not camping. <0001> gsm48_rr.c:2170 PAGING ignored, we are not camping. <0001> gsm48_rr.c:2170 PAGING ignored, we are not camping. <0001> gsm48_rr.c:2450 IMMEDIATE ASSIGNMENT: <0001> gsm48_rr.c:2473 (ta 2/1107m ra 0x05 chan_nr 0x49 ARFCN 19 TS 1 SS 1 TSC 1) <0001> gsm48_rr.c:2503 Request, but not for us. <0001> gsm48_rr.c:2450 IMMEDIATE ASSIGNMENT: <0001> gsm48_rr.c:2473 (ta 2/1107m ra 0x05 chan_nr 0x49 ARFCN 19 TS 1 SS 1 TSC 1) <0001> gsm48_rr.c:2503 Request, but not for us. <0001> gsm48_rr.c:2225 PAGING ignored, we are not camping. <0001> gsm48_rr.c:2170 PAGING ignored, we are not camping. <0001> gsm48_rr.c:2170 PAGING ignored, we are not camping. <0001> gsm48_rr.c:673 MON: f=19 lev=-77 snr= 0 ber= 6 LAI=104 002 b00f ID=4fd9 <0001> gsm48_rr.c:2170 PAGING ignored, we are not camping. <0001> gsm48_rr.c:2170 PAGING ignored, we are not camping. <0001> gsm48_rr.c:2170 PAGING ignored, we are not camping. <0001> gsm48_rr.c:2450 IMMEDIATE ASSIGNMENT: <0001> gsm48_rr.c:2473 (ta 2/1107m ra 0x00 chan_nr 0x61 ARFCN 19 TS 1 SS 4 TSC 1) <0001> gsm48_rr.c:2503 Request, but not for us. <0001> gsm48_rr.c:2450 IMMEDIATE ASSIGNMENT: <0001> gsm48_rr.c:2473 (ta 2/1107m ra 0x00 chan_nr 0x61 ARFCN 19 TS 1 SS 4 TSC 1) <0001> gsm48_rr.c:2503 Request, but not for us. <0001> gsm48_rr.c:2450 IMMEDIATE ASSIGNMENT: <0001> gsm48_rr.c:2462 (ta 2/1107m ra 0x7d chan_nr 0x0b MAIO 0 HSN 38 TS 3 SS 0 TSC 0) <0001> gsm48_rr.c:2503 Request, but not for us. <0001> gsm48_rr.c:2170 PAGING ignored, we are not camping. <0001> gsm48_rr.c:2450 IMMEDIATE ASSIGNMENT: <0001> gsm48_rr.c:2462 (ta 2/1107m ra 0x7d chan_nr 0x0b MAIO 0 HSN 38 TS 3 SS 0 TSC 0) <0001> gsm48_rr.c:2503 Request, but not for us. <0001> gsm48_rr.c:2170 PAGING ignored, we are not camping. <0001> gsm48_rr.c:2170 PAGING ignored, we are not camping. <0001> gsm48_rr.c:2170 PAGING ignored, we are not camping. <0001> gsm48_rr.c:2170 PAGING ignored, we are not camping. <0001> gsm48_rr.c:673 MON: f=19 lev=-78 snr= 0 ber= 0 LAI=104 002 b00f ID=4fd9 <0001> gsm48_rr.c:2170 PAGING ignored, we are not camping. <0001> gsm48_rr.c:2170 PAGING ignored, we are not camping. <0001> gsm48_rr.c:2225 PAGING ignored, we are not camping. <0001> gsm48_rr.c:2170 PAGING ignored, we are not camping. <0001> gsm48_rr.c:2170 PAGING ignored, we are not camping. <0001> gsm48_rr.c:2170 PAGING ignored, we are not camping. <0001> gsm48_rr.c:2170 PAGING ignored, we are not camping. <0001> gsm48_rr.c:2225 PAGING ignored, we are not camping. <0001> gsm48_rr.c:2170 PAGING ignored, we are not camping. <0001> gsm48_rr.c:2170 PAGING ignored, we are not camping. <0001> gsm48_rr.c:673 MON: f=19 lev=-78 snr= 0 ber= 3 LAI=104 002 b00f ID=4fd9 <0001> gsm48_rr.c:2170 PAGING ignored, we are not camping. <0001> gsm48_rr.c:2170 PAGING ignored, we are not camping. <0001> gsm48_rr.c:2170 PAGING ignored, we are not camping. <0001> gsm48_rr.c:2170 PAGING ignored, we are not camping. <0001> gsm48_rr.c:2170 PAGING ignored, we are not camping. <0001> gsm48_rr.c:2170 PAGING ignored, we are not camping. <0001> gsm48_rr.c:2170 PAGING ignored, we are not camping. <0001> gsm48_rr.c:2170 PAGING ignored, we are not camping. <0001> gsm48_rr.c:2170 PAGING ignored, we are not camping. <0001> gsm48_rr.c:2450 IMMEDIATE ASSIGNMENT: <0001> gsm48_rr.c:2462 (ta 2/1107m ra 0x77 chan_nr 0x09 MAIO 0 HSN 38 TS 1 SS 0 TSC 0) <0001> gsm48_rr.c:2503 Request, but not for us. <0001> gsm48_rr.c:2450 IMMEDIATE ASSIGNMENT: <0001> gsm48_rr.c:2462 (ta 2/1107m ra 0x77 chan_nr 0x09 MAIO 0 HSN 38 TS 1 SS 0 TSC 0) <0001> gsm48_rr.c:2503 Request, but not for us. <0001> gsm48_rr.c:2225 PAGING ignored, we are not camping. <0001> gsm48_rr.c:2170 PAGING ignored, we are not camping. <0001> gsm48_rr.c:673 MON: f=19 lev=-78 snr= 0 ber= 6 LAI=104 002 b00f ID=4fd9 <0001> gsm48_rr.c:765 timer T3126 has fired <000e> gsm48_rr.c:770 Requesting channel failed <0001> gsm48_rr.c:366 new state connection pending -> idle <0003> gsm322.c:4037 (ms 1) Event 'EVENT_RET_IDLE' for Cell selection in state 'connected mode 1' <0003> gsm322.c:3565 Selecting ARFCN 19. after LOC.UPD. <0003> gsm322.c:463 Sync to ARFCN=19 rxlev=-74 (Sysinfo, ccch mode NON-COMB) <0003> gsm322.c:823 new state 'connected mode 1' -> 'C3 camped normally' <0005> gsm48_mm.c:3902 (ms 1) Received 'RR_REL_IND' from RR in state wait for RR connection (location updating) (sapi 0) <0005> gsm48_mm.c:2732 RR link released after loc. upd. <000e> gsm48_mm.c:2676 Location update failed <000e> gsm48_mm.c:2686 Try location update later <0005> gsm48_mm.c:2688 Loc. upd. failed, retry #0 <0005> gsm48_mm.c:413 starting T3211 (loc. upd. retry delay) with 15.0 seconds <0005> gsm48_mm.c:1143 We are camping normally as returning to MM IDLE <0005> gsm48_mm.c:1159 Loc. upd. allowed. <0005> gsm48_mm.c:919 new state wait for RR connection (location updating) -> MM IDLE, location updating needed <0005> gsm48_mm.c:909 new MM IDLE state location updating needed -> attempting to update <0005> gsm48_mm.c:2215 Loc. upd. already pending. <0005> gsm48_mm.c:4311 (ms 1) Received 'MM_EVENT_CELL_SELECTED' event in state MM IDLE, attempting to update <0005> gsm48_mm.c:2215 Loc. upd. already pending. <0003> gsm322.c:2938 Channel synched. (ARFCN=19, snr=16, BSIC=17) <0001> gsm322.c:2959 using DSC of 90 Can you provide me any hints on how to debug this ? Why is the location update failing constantly ? Thanks in advance for your help. Best regards, Maciej Grela

6 9

Mobile testing branch
by tom mc loughlin 07 Sep '14

07 Sep '14

Hi all I have built Osmocommbb with testing branch and I want to run Mobile app allowing me to make a call via my local network. All goes well in the build but I am unable to register on my own network while using a genuine network sim. This is output from my compal_e88/layer1.compalram.bin. As you can see all looks good with signal levels fairly ok until this point and then level drops to -138 dbm and there it stays on all chanells. I have tried this with 3 different sims and all is the same. Can someone help? Tom bat_compal_e88_chg_state=0 L1CTL_RESET_REQ: FULL!SIM Request (7): a0 a4 00 00 02 3f 00 SIM Response (2): 9f 20 SIM Request (5): a0 c0 00 00 20 SIM Response (34): 00 00 02 b7 3f 00 01 00 00 00 00 00 13 b3 05 0a 04 00 83 8a 83 8a 00 03 00 00 02 b7 00 00 02 b7 90 00 SIM Request (7): a0 a4 00 00 02 2f e2 SIM Response (2): 9f 0f SIM Request (5): a0 c0 00 00 0f SIM Response (17): 00 00 00 0a 2f e2 04 00 0f 00 ff 01 02 00 00 90 00 SIM Request (5): a0 b0 00 00 0a SIM Response (12): 98 53 03 11 02 08 22 45 65 f6 90 00 SIM Request (7): a0 a4 00 00 02 7f 20 SIM Response (2): 9f 20 SIM Request (5): a0 c0 00 00 20 SIM Response (34): 00 00 00 00 7f 20 02 00 00 00 00 00 13 b3 00 23 04 00 83 8a 83 8a 00 03 00 00 02 b7 00 00 00 00 90 00 SIM Request (7): a0 a4 00 00 02 6f 07 SIM Response (2): 9f 0f SIM Request (5): a0 c0 00 00 0f SIM Response (17): 00 00 00 09 6f 07 04 00 14 00 14 01 02 00 00 90 00 SIM Request (5): a0 b0 00 00 09 SIM Response (11): 08 29 27 10 17 21 89 26 33 90 00 SIM Request (7): a0 a4 00 00 02 6f 7e SIM Response (2): 9f 0f SIM Request (5): a0 c0 00 00 0f SIM Response (17): 00 00 00 0b 6f 7e 04 00 11 00 14 01 02 00 00 90 00 SIM Request (5): a0 b0 00 00 0b SIM Response (13): ff ff ff ff 72 f2 60 ff fe 00 03 90 00 SIM Request (7): a0 a4 00 00 02 6f 20 SIM Response (2): 9f 0f SIM Request (5): a0 c0 00 00 0f SIM Response (17): 00 00 00 09 6f 20 04 00 11 00 44 01 02 00 00 90 00 SIM Request (5): a0 b0 00 00 09 SIM Response (11): ff ff ff ff ff ff ff ff 07 90 00 SIM Request (7): a0 a4 00 00 02 6f 30 SIM Response (2): 9f 0f SIM Request (5): a0 c0 00 00 0f SIM Response (17): 00 00 01 2c 6f 30 04 00 11 00 44 01 02 00 00 90 00 SIM Request (5): a0 b0 00 00 2c SIM Response (46): 32 f4 51 02 f8 01 12 f4 60 12 f4 10 62 f2 20 02 f4 40 22 f2 01 02 f6 10 22 f8 10 72 f0 77 62 f8 10 42 f0 80 32 f8 10 02 f2 50 32 f2 90 00 BAT-ADC: 593 6 0 0 1023 353 327 277 Charger at 51 mV. PM MEAS: ARFCN=1016, 33 dBm at baseband, -104 dBm at RF PM MEAS: ARFCN=1017, 33 dBm at baseband, -104 dBm at RF PM MEAS: ARFCN=1018, 29 dBm at baseband, -108 dBm at RF PM MEAS: ARFCN=1019, 29 dBm at baseband, -108 dBm at RF PM MEAS: ARFCN=1020, 28 dBm at baseband, -109 dBm at RF PM MEAS: ARFCN=1021, 29 dBm at baseband, -108 dBm at RF PM MEAS: ARFCN=1022, 27 dBm at baseband, -110 dBm at RF PM MEAS: ARFCN=1023, 39 dBm at baseband, -98 dBm at RF L1CTL_RESET_REQ: FULL!L1CTL_FBSB_REQ (arfcn=1, flags=0x7) Starting FCCH RecognitionFB0 (3859:4): TOA= 3792, Power= -88dBm, Angle=-1361Hz DSP Error Status: 256 FB1 (3869:8): TOA= 8751, Power= -88dBm, Angle= -36Hz fn_offset=3867 (fn=3869 + attempt=8 + ntdma = 6) delay=8 (fn_offset=3867 + 11 - fn=3869 - 1 scheduling next FB/SB detection task with delay 8 =>FB @ FNR 3867 fn_offset=3867 qbits=4820 Synchronize_TDMA LOST 3711! DSP Error Status: 256 DSP Error Status: 264 L1CTL_RESET_REQ: FULL!LOST 1893! L1CTL_FBSB_REQ (arfcn=981, flags=0x7) Starting FCCH RecognitionLOST 1857! L1CTL_RESET_REQ: FULL!L1CTL_FBSB_REQ (arfcn=71, flags=0x7) Starting FCCH RecognitionL1CTL_RESET_REQ: FULL!L1CTL_FBSB_REQ (arfcn=993, flags=0x7) Starting FCCH RecognitionL1CTL_RESET_REQ: FULL!LOST 1899! L1CTL_FBSB_REQ (arfcn=979, flags=0x7) Starting FCCH RecognitionLOST 1851! DSP Error Status: 8 L1CTL_RESET_REQ: FULL!L1CTL_FBSB_REQ (arfcn=4, flags=0x7) Starting FCCH RecognitionDSP Error Status: 8 DSP Error Status: 8 DSP Error Status: 8 BAT-ADC: 590 6 0 0 1023 356 330 277 Charger at 51 mV. Battery at 4033 mV. Charging at 0 mA. Battery capacity is 100%. Battery range is 3199..3999 mV. Battery full at 468 LSB .. full at 585 LSB Charging at 239 LSB (204 mA). BCICTL2=0x3ff battery-info.flags=0x00000000 bat_compal_e88_chg_state=0 DSP Error Status: 8 L1CTL_RESET_REQ: FULL!L1CTL_FBSB_REQ (arfcn=1023, flags=0x7) Starting FCCH RecognitionDSP Error Status: 8 DSP Error Status: 8 DSP Error Status: 8 DSP Error Status: 8 L1CTL_RESET_REQ: FULL!LOST 1900! L1CTL_FBSB_REQ (arfcn=980, flags=0x7) Starting FCCH RecognitionLOST 1850! DSP Error Status: 8 DSP Error Status: 8 DSP Error Status: 8 DSP Error Status: 8 L1CTL_RESET_REQ: FULL!L1CTL_FBSB_REQ (arfcn=78, flags=0x7) Starting FCCH RecognitionDSP Error Status: 8 DSP Error Status: 8 DSP Error Status: 8 DSP Error Status: 8 L1CTL_RESET_REQ: FULL!L1CTL_FBSB_REQ (arfcn=53, flags=0x7) LOST 1880! Starting FCCH RecognitionLOST 1870! DSP Error Status: 8 DSP Error Status: 8 DSP Error Status: 8 DSP Error Status: 8 L1CTL_RESET_REQ: FULL!L1CTL_FBSB_REQ (arfcn=69, flags=0x7) Starting FCCH RecognitionDSP Error Status: 8 DSP Error Status: 8 DSP Error Status: 8 DSP Error Status: 8 L1CTL_RESET_REQ: FULL!L1CTL_FBSB_REQ (arfcn=94, flags=0x7) Starting FCCH RecognitionDSP Error Status: 8 DSP Error Status: 8 DSP Error Status: 8 DSP Error Status: 8 L1CTL_RESET_REQ: FULL!L1CTL_FBSB_REQ (arfcn=57, flags=0x7) Starting FCCH RecognitionDSP Error Status: 8 DSP Error Status: 8 DSP Error Status: 8 DSP Error Status: 8 L1CTL_RESET_REQ: FULL!L1CTL_FBSB_REQ (arfcn=985, flags=0x7) Starting FCCH RecognitionDSP Error Status: 8 DSP Error Status: 8 DSP Error Status: 8 DSP Error Status: 8 L1CTL_RESET_REQ: FULL!L1CTL_FBSB_REQ (arfcn=970, flags=0x7) Starting FCCH RecognitionDSP Error Status: 8 DSP Error Status: 8 DSP Error Status: 8 DSP Error Status: 8 L1CTL_RESET_REQ: FULL!L1CTL_FBSB_REQ (arfcn=45, flags=0x7) Starting FCCH RecognitionDSP Error Status: 8 DSP Error Status: 8 DSP Error Status: 8 DSP Error Status: 8 L1CTL_RESET_REQ: FULL!L1CTL_FBSB_REQ (arfcn=43, flags=0x7) Starting FCCH RecognitionDSP Error Status: 8 DSP Error Status: 8 DSP Error Status: 8 DSP Error Status: 8 L1CTL_RESET_REQ: FULL!L1CTL_FBSB_REQ (arfcn=33, flags=0x7) Starting FCCH RecognitionDSP Error Status: 8 DSP Error Status: 8 DSP Error Status: 8 DSP Error Status: 8 L1CTL_RESET_REQ: FULL!L1CTL_FBSB_REQ (arfcn=7, flags=0x7) Starting FCCH RecognitionDSP Error Status: 8 DSP Error Status: 8 DSP Error Status: 8 DSP Error Status: 8 L1CTL_RESET_REQ: FULL!L1CTL_FBSB_REQ (arfcn=988, flags=0x7) Starting FCCH RecognitionDSP Error Status: 8 DSP Error Status: 8 DSP Error Status: 8 DSP Error Status: 8 L1CTL_RESET_REQ: FULL!L1CTL_FBSB_REQ (arfcn=971, flags=0x7) Starting FCCH RecognitionDSP Error Status: 8 DSP Error Status: 8 DSP Error Status: 8 DSP Error Status: 8 L1CTL_RESET_REQ: FULL!L1CTL_FBSB_REQ (arfcn=969, flags=0x7) Starting FCCH RecognitionDSP Error Status: 8 DSP Error Status: 8 DSP Error Status: 8 DSP Error Status: 8 L1CTL_RESET_REQ: FULL!L1CTL_FBSB_REQ (arfcn=42, flags=0x7) Starting FCCH RecognitionDSP Error Status: 8 DSP Error Status: 8 DSP Error Status: 8 DSP Error Status: 8 L1CTL_RESET_REQ: FULL!L1CTL_FBSB_REQ (arfcn=40, flags=0x7) Starting FCCH RecognitionDSP Error Status: 8 DSP Error Status: 8 DSP Error Status: 8 DSP Error Status: 8 L1CTL_RESET_REQ: FULL!L1CTL_FBSB_REQ (arfcn=32, flags=0x7) Starting FCCH RecognitionDSP Error Status: 8 DSP Error Status: 8 BAT-ADC: 592 6 0 0 1023 353 327 270 Charger at 51 mV. Battery at 4047 mV. Charging at 0 mA. Battery capacity is 100%. Battery range is 3199..3999 mV. Battery full at 468 LSB .. full at 585 LSB Charging at 239 LSB (204 mA). BCICTL2=0x3ff battery-info.flags=0x00000000 bat_compal_e88_chg_state=0 DSP Error Status: 8 DSP Error Status: 8 L1CTL_RESET_REQ: FULL!L1CTL_FBSB_REQ (arfcn=85, flags=0x7) Starting FCCH RecognitionDSP Error Status: 8 DSP Error Status: 8 DSP Error Status: 8 DSP Error Status: 8 L1CTL_RESET_REQ: FULL!L1CTL_FBSB_REQ (arfcn=55, flags=0x7) Starting FCCH RecognitionDSP Error Status: 8 DSP Error Status: 8 DSP Error Status: 8 DSP Error Status: 8 L1CTL_RESET_REQ: FULL!L1CTL_FBSB_REQ (arfcn=47, flags=0x7) Starting FCCH RecognitionDSP Error Status: 8 DSP Error Status: 8 DSP Error Status: 8 DSP Error Status: 8 L1CTL_RESET_REQ: FULL!L1CTL_FBSB_REQ (arfcn=28, flags=0x7) Starting FCCH RecognitionDSP Error Status: 8 DSP Error Status: 8 DSP Error Status: 8 DSP Error Status: 8 L1CTL_RESET_REQ: FULL!L1CTL_FBSB_REQ (arfcn=5, flags=0x7) Starting FCCH RecognitionDSP Error Status: 8 DSP Error Status: 8 DSP Error Status: 8 DSP Error Status: 8 L1CTL_RESET_REQ: FULL!L1CTL_PM_REQ start=0 end=124 DSP Error Status: 8 PM MEAS: ARFCN=0, 0 dBm at baseband, -138 dBm at RF DSP Error Status: 8 PM MEAS: ARFCN=1, 0 dBm at baseband, -138 dBm at RF DSP Error Status: 8 PM MEAS: ARFCN=2, 0 dBm at baseband, -138 dBm at RF DSP Error Status: 8 PM MEAS: ARFCN=3, 0 dBm at baseband, -138 dBm at RF DSP Error Status: 8 PM MEAS: ARFCN=4, 0 dBm at baseband, -138 dBm at RF DSP Error Status: 8 PM MEAS: ARFCN=5, 0 dBm at baseband, -138 dBm at RF DSP Error Status: 8 PM MEAS: ARFCN=6, 0 dBm at baseband, -138 dBm at RF DSP Error Status: 8 PM MEAS: ARFCN=7, 0 dBm at baseband, -138 dBm at RF DSP Error Status: 8 PM MEAS: ARFCN=8, 0 dBm at baseband, -138 dBm at RF DSP Error Status: 8 PM MEAS: ARFCN=9, 0 dBm at baseband, -138 dBm at RF DSP Error Status: 8 PM MEAS: ARFCN=10, 0 dBm at baseband, -138 dBm at RF DSP Error Status: 8 PM MEAS: ARFCN=11, 0 dBm at baseband, -138 dBm at RF DSP Error Status: 8 PM MEAS: ARFCN=12, 0 dBm at baseband, -138 dBm at RF DSP Error Status: 8 PM MEAS: ARFCN=13, 0 dBm at baseband, -138 dBm at RF DSP Error Status: 8 PM MEAS: ARFCN=14, 0 dBm at baseband, -138 dBm at RF DSP Error Status: 8 PM MEAS: ARFCN=15, 0 dBm at baseband, -138 dBm at RF DSP Error Status: 8 PM MEAS: ARFCN=16, 0 dBm at baseband, -138 dBm at RF DSP Error Status: 8 PM MEAS: ARFCN=17, 0 dBm at baseband, -138 dBm at RF DSP Error Status: 8 PM MEAS: ARFCN=18, 0 dBm at baseband, -138 dBm at RF DSP Error Status: 8 PM MEAS: ARFCN=19, 0 dBm at baseband, -138 dBm at RF DSP Error Status: 8 PM MEAS: ARFCN=20, 0 dBm at baseband, -138 dBm at RF DSP Error Status: 8 PM MEAS: ARFCN=21, 0 dBm at baseband, -138 dBm at RF DSP Error Status: 8 PM MEAS: ARFCN=22, 0 dBm at baseband, -138 dBm at RF DSP Error Status: 8 PM MEAS: ARFCN=23, 0 dBm at baseband, -138 dBm at RF DSP Error Status: 8 PM MEAS: ARFCN=24, 0 dBm at baseband, -138 dBm at RF DSP Error Status: 8 PM MEAS: ARFCN=25, 0 dBm at baseband, -138 dBm at RF DSP Error Status: 8 PM MEAS: ARFCN=26, 0 dBm at baseband, -138 dBm at RF DSP Error Status: 8 PM MEAS: ARFCN=27, 0 dBm at baseband, -138 dBm at RF DSP Error Status: 8 PM MEAS: ARFCN=28, 0 dBm at baseband, -138 dBm at RF DSP Error Status: 8 PM MEAS: ARFCN=29, 0 dBm at baseband, -138 dBm at RF DSP Error Status: 8

5 7

mobile app crash
by TSAREGORODTSEV, Yury 13 Aug '14

13 Aug '14

Hello, can anyone help with fix? Mobile application crashing all time: root@aero-bts:/with_sim/osmocom-bb/src/host/layer23/src/mobile# ./mobile Copyright (C) 2008-2010 ... Contributions by ... License GPLv2+: GNU GPL version 2 or later <http://gnu.org/licenses/gpl.html> This is free software: you are free to change and redistribute it. There is NO WARRANTY, to the extent permitted by law. <000f> sim.c:1223 init SIM client <0006> gsm48_cc.c:63 init Call Control <0007> gsm480_ss.c:231 init SS <0019> gsm411_sms.c:63 init SMS <0001> gsm48_rr.c:5500 init Radio Ressource process <0005> gsm48_mm.c:1324 init Mobility Management process <0005> gsm48_mm.c:1037 Selecting PLMN SEARCH state, because no SIM. <0002> gsm322.c:5037 init PLMN process <0003> gsm322.c:5038 init Cell Selection process <0003> gsm322.c:5095 Read stored BA list (mcc=214 mnc=07 Spain, movistar) Mobile '1' initialized, please start phone now! VTY available on port 4247. <0005> subscriber.c:600 Requesting SIM file 0x2fe2 <000f> sim.c:209 got new job: SIM_JOB_READ_BINARY (handle=00000004) <000f> sim.c:697 go MF <000f> sim.c:241 SELECT (file=0x3f00) <000f> sim.c:187 sending APDU (class 0xa0, ins 0xa4) <000f> sim.c:876 received APDU (len=0 sw1=0x9f sw2=0x1e) <000f> sim.c:949 command successfull <000f> sim.c:571 GET RESPONSE (len=30) <000f> sim.c:187 sending APDU (class 0xa0, ins 0xc0) <000f> sim.c:876 received APDU (len=30 sw1=0x90 sw2=0x00) <000f> sim.c:949 command successfull <000f> sim.c:241 SELECT (file=0x2fe2) <000f> sim.c:187 sending APDU (class 0xa0, ins 0xa4) <000f> sim.c:876 received APDU (len=0 sw1=0x9f sw2=0x0f) <000f> sim.c:949 command successfull <000f> sim.c:571 GET RESPONSE (len=15) <000f> sim.c:187 sending APDU (class 0xa0, ins 0xc0) <000f> sim.c:876 received APDU (len=15 sw1=0x90 sw2=0x00) <000f> sim.c:949 command successfull <000f> sim.c:1065 selected file (len 10) <000f> sim.c:277 READ BINARY (offset=0 len=10) <000f> sim.c:187 sending APDU (class 0xa0, ins 0xb0) <000f> sim.c:876 received APDU (len=10 sw1=0x90 sw2=0x00) <000f> sim.c:949 command successfull <000f> sim.c:151 sending result to callback function (type=0) <0005> subscriber.c:232 received ICCID 8934076100140610329 from SIM <0005> subscriber.c:600 Requesting SIM file 0x6f07 <000f> sim.c:209 got new job: SIM_JOB_READ_BINARY (handle=00000004) <000f> sim.c:706 requested path is longer, go child DFgsm <000f> sim.c:241 SELECT (file=0x7f20) <000f> sim.c:187 sending APDU (class 0xa0, ins 0xa4) <000f> sim.c:876 received APDU (len=0 sw1=0x9f sw2=0x1e) <000f> sim.c:949 command successfull <000f> sim.c:571 GET RESPONSE (len=30) <000f> sim.c:187 sending APDU (class 0xa0, ins 0xc0) <000f> sim.c:876 received APDU (len=30 sw1=0x90 sw2=0x00) <000f> sim.c:949 command successfull <000f> sim.c:241 SELECT (file=0x6f07) <000f> sim.c:187 sending APDU (class 0xa0, ins 0xa4) <000f> sim.c:876 received APDU (len=0 sw1=0x9f sw2=0x0f) <000f> sim.c:949 command successfull <000f> sim.c:571 GET RESPONSE (len=15) <000f> sim.c:187 sending APDU (class 0xa0, ins 0xc0) <000f> sim.c:876 received APDU (len=15 sw1=0x90 sw2=0x00) <000f> sim.c:949 command successfull <000f> sim.c:1065 selected file (len 9) <000f> sim.c:277 READ BINARY (offset=0 len=9) <000f> sim.c:187 sending APDU (class 0xa0, ins 0xb0) <000f> sim.c:876 received APDU (len=9 sw1=0x90 sw2=0x00) <000f> sim.c:949 command successfull <000f> sim.c:151 sending result to callback function (type=0) <0005> subscriber.c:262 received IMSI 214075542695571 from SIM <0005> subscriber.c:600 Requesting SIM file 0x6f7e <000f> sim.c:209 got new job: SIM_JOB_READ_BINARY (handle=00000004) <000f> sim.c:241 SELECT (file=0x6f7e) <000f> sim.c:187 sending APDU (class 0xa0, ins 0xa4) <000f> sim.c:876 received APDU (len=0 sw1=0x9f sw2=0x0f) <000f> sim.c:949 command successfull <000f> sim.c:571 GET RESPONSE (len=15) <000f> sim.c:187 sending APDU (class 0xa0, ins 0xc0) <000f> sim.c:876 received APDU (len=15 sw1=0x90 sw2=0x00) <000f> sim.c:949 command successfull <000f> sim.c:1065 selected file (len 11) <000f> sim.c:277 READ BINARY (offset=0 len=11) <000f> sim.c:187 sending APDU (class 0xa0, ins 0xb0) <000f> sim.c:876 received APDU (len=11 sw1=0x90 sw2=0x00) <000f> sim.c:949 command successfull <000f> sim.c:151 sending result to callback function (type=0) <0005> subscriber.c:299 received LOCI from SIM (mcc=214 mnc=07 lac=0x0b58 U1) <0005> subscriber.c:600 Requesting SIM file 0x6f20 <000f> sim.c:209 got new job: SIM_JOB_READ_BINARY (handle=00000004) <000f> sim.c:241 SELECT (file=0x6f20) <000f> sim.c:187 sending APDU (class 0xa0, ins 0xa4) <000f> sim.c:876 received APDU (len=0 sw1=0x9f sw2=0x0f) <000f> sim.c:949 command successfull <000f> sim.c:571 GET RESPONSE (len=15) <000f> sim.c:187 sending APDU (class 0xa0, ins 0xc0) <000f> sim.c:876 received APDU (len=15 sw1=0x90 sw2=0x00) <000f> sim.c:949 command successfull <000f> sim.c:1065 selected file (len 9) <000f> sim.c:277 READ BINARY (offset=0 len=9) <000f> sim.c:187 sending APDU (class 0xa0, ins 0xb0) <000f> sim.c:876 received APDU (len=9 sw1=0x90 sw2=0x00) <000f> sim.c:949 command successfull <000f> sim.c:151 sending result to callback function (type=0) <0005> subscriber.c:376 received KEY from SIM <0005> subscriber.c:600 Requesting SIM file 0x6f30 <000f> sim.c:209 got new job: SIM_JOB_READ_BINARY (handle=00000004) <000f> sim.c:241 SELECT (file=0x6f30) <000f> sim.c:187 sending APDU (class 0xa0, ins 0xa4) <000f> sim.c:876 received APDU (len=0 sw1=0x9f sw2=0x0f) <000f> sim.c:949 command successfull <000f> sim.c:571 GET RESPONSE (len=15) <000f> sim.c:187 sending APDU (class 0xa0, ins 0xc0) <000f> sim.c:876 received APDU (len=15 sw1=0x90 sw2=0x00) <000f> sim.c:949 command successfull <000f> sim.c:1065 selected file (len 48) <000f> sim.c:277 READ BINARY (offset=0 len=48) <000f> sim.c:187 sending APDU (class 0xa0, ins 0xb0) <000f> sim.c:876 received APDU (len=48 sw1=0x90 sw2=0x00) <000f> sim.c:949 command successfull <000f> sim.c:151 sending result to callback function (type=0) <0005> subscriber.c:414 received PLMN selector (mcc=208 mnc=01) from SIM <0005> subscriber.c:414 received PLMN selector (mcc=208 mnc=20) from SIM <0005> subscriber.c:414 received PLMN selector (mcc=234 mnc=10) from SIM <0005> subscriber.c:414 received PLMN selector (mcc=268 mnc=06) from SIM <0005> subscriber.c:414 received PLMN selector (mcc=268 mnc=03) from SIM <0005> subscriber.c:414 received PLMN selector (mcc=222 mnc=01) from SIM <0005> subscriber.c:414 received PLMN selector (mcc=262 mnc=07) from SIM <0005> subscriber.c:414 received PLMN selector (mcc=204 mnc=08) from SIM <0005> subscriber.c:414 received PLMN selector (mcc=604 mnc=00) from SIM <0005> subscriber.c:414 received PLMN selector (mcc=232 mnc=03) from SIM <0005> subscriber.c:414 received PLMN selector (mcc=228 mnc=02) from SIM <0005> subscriber.c:414 received PLMN selector (mcc=272 mnc=02) from SIM <0005> subscriber.c:414 received PLMN selector (mcc=334 mnc=030) from SIM <0005> subscriber.c:414 received PLMN selector (mcc=202 mnc=10) from SIM <0005> subscriber.c:414 received PLMN selector (mcc=226 mnc=10) from SIM <0005> subscriber.c:414 received PLMN selector (mcc=226 mnc=03) from SIM <0005> subscriber.c:600 Requesting SIM file 0x6f31 <000f> sim.c:209 got new job: SIM_JOB_READ_BINARY (handle=00000004) <000f> sim.c:241 SELECT (file=0x6f31) <000f> sim.c:187 sending APDU (class 0xa0, ins 0xa4) <000f> sim.c:876 received APDU (len=0 sw1=0x9f sw2=0x0f) <000f> sim.c:949 command successfull <000f> sim.c:571 GET RESPONSE (len=15) <000f> sim.c:187 sending APDU (class 0xa0, ins 0xc0) <000f> sim.c:876 received APDU (len=15 sw1=0x90 sw2=0x00) <000f> sim.c:949 command successfull <000f> sim.c:1065 selected file (len 1) <000f> sim.c:277 READ BINARY (offset=0 len=1) <000f> sim.c:187 sending APDU (class 0xa0, ins 0xb0) <000f> sim.c:876 received APDU (len=1 sw1=0x90 sw2=0x00) <000f> sim.c:949 command successfull <000f> sim.c:151 sending result to callback function (type=0) <0005> subscriber.c:435 received HPPLMN 5 (30 mins) from SIM <0005> subscriber.c:600 Requesting SIM file 0x6f46 <000f> sim.c:209 got new job: SIM_JOB_READ_BINARY (handle=00000004) <000f> sim.c:241 SELECT (file=0x6f46) <000f> sim.c:187 sending APDU (class 0xa0, ins 0xa4) <000f> sim.c:876 received APDU (len=0 sw1=0x9f sw2=0x0f) <000f> sim.c:949 command successfull <000f> sim.c:571 GET RESPONSE (len=15) <000f> sim.c:187 sending APDU (class 0xa0, ins 0xc0) <000f> sim.c:876 received APDU (len=15 sw1=0x90 sw2=0x00) <000f> sim.c:949 command successfull <000f> sim.c:1065 selected file (len 17) <000f> sim.c:277 READ BINARY (offset=0 len=17) <000f> sim.c:187 sending APDU (class 0xa0, ins 0xb0) <000f> sim.c:876 received APDU (len=17 sw1=0x90 sw2=0x00) <000f> sim.c:949 command successfull <000f> sim.c:151 sending result to callback function (type=0) <0005> subscriber.c:687 SIM reading failed, file invalid <0005> subscriber.c:600 Requesting SIM file 0x6f78 <000f> sim.c:209 got new job: SIM_JOB_READ_BINARY (handle=00000004) <000f> sim.c:241 SELECT (file=0x6f78) <000f> sim.c:187 sending APDU (class 0xa0, ins 0xa4) <000f> sim.c:876 received APDU (len=0 sw1=0x9f sw2=0x0f) <000f> sim.c:949 command successfull <000f> sim.c:571 GET RESPONSE (len=15) <000f> sim.c:187 sending APDU (class 0xa0, ins 0xc0) <000f> sim.c:876 received APDU (len=15 sw1=0x90 sw2=0x00) <000f> sim.c:949 command successfull <000f> sim.c:1065 selected file (len 2) <000f> sim.c:277 READ BINARY (offset=0 len=2) <000f> sim.c:187 sending APDU (class 0xa0, ins 0xb0) <000f> sim.c:876 received APDU (len=2 sw1=0x90 sw2=0x00) <000f> sim.c:949 command successfull <000f> sim.c:151 sending result to callback function (type=0) <0005> subscriber.c:476 received ACC 0002 from SIM <0005> subscriber.c:600 Requesting SIM file 0x6f7b <000f> sim.c:209 got new job: SIM_JOB_READ_BINARY (handle=00000004) <000f> sim.c:241 SELECT (file=0x6f7b) <000f> sim.c:187 sending APDU (class 0xa0, ins 0xa4) <000f> sim.c:876 received APDU (len=0 sw1=0x9f sw2=0x0f) <000f> sim.c:949 command successfull <000f> sim.c:571 GET RESPONSE (len=15) <000f> sim.c:187 sending APDU (class 0xa0, ins 0xc0) <000f> sim.c:876 received APDU (len=15 sw1=0x90 sw2=0x00) <000f> sim.c:949 command successfull <000f> sim.c:1065 selected file (len 12) <000f> sim.c:277 READ BINARY (offset=0 len=12) <000f> sim.c:187 sending APDU (class 0xa0, ins 0xb0) <000f> sim.c:876 received APDU (len=12 sw1=0x90 sw2=0x00) <000f> sim.c:949 command successfull <000f> sim.c:151 sending result to callback function (type=0) <0005> subscriber.c:515 received Forbidden PLMN 214 01 from SIM <0005> subscriber.c:515 received Forbidden PLMN 214 03 from SIM <0005> subscriber.c:600 Requesting SIM file 0x6f40 <000f> sim.c:209 got new job: SIM_JOB_READ_RECORD (handle=00000004) <000f> sim.c:697 go MF <000f> sim.c:241 SELECT (file=0x3f00) <000f> sim.c:187 sending APDU (class 0xa0, ins 0xa4) <000f> sim.c:876 received APDU (len=0 sw1=0x9f sw2=0x1e) <000f> sim.c:949 command successfull <000f> sim.c:571 GET RESPONSE (len=30) <000f> sim.c:187 sending APDU (class 0xa0, ins 0xc0) <000f> sim.c:876 received APDU (len=30 sw1=0x90 sw2=0x00) <000f> sim.c:949 command successfull <000f> sim.c:706 requested path is longer, go child DFtelecom <000f> sim.c:241 SELECT (file=0x7f10) <000f> sim.c:187 sending APDU (class 0xa0, ins 0xa4) <000f> sim.c:876 received APDU (len=0 sw1=0x9f sw2=0x1e) <000f> sim.c:949 command successfull <000f> sim.c:571 GET RESPONSE (len=30) <000f> sim.c:187 sending APDU (class 0xa0, ins 0xc0) <000f> sim.c:876 received APDU (len=30 sw1=0x90 sw2=0x00) <000f> sim.c:949 command successfull <000f> sim.c:241 SELECT (file=0x6f40) <000f> sim.c:187 sending APDU (class 0xa0, ins 0xa4) <000f> sim.c:876 received APDU (len=0 sw1=0x9f sw2=0x0f) <000f> sim.c:949 command successfull <000f> sim.c:571 GET RESPONSE (len=15) <000f> sim.c:187 sending APDU (class 0xa0, ins 0xc0) <000f> sim.c:876 received APDU (len=15 sw1=0x90 sw2=0x00) <000f> sim.c:949 command successfull <000f> sim.c:1060 selected record (len 28 structure 1) <000f> sim.c:312 READ RECORD (rec_no=1 mode=4 len=28) <000f> sim.c:187 sending APDU (class 0xa0, ins 0xb2) <000f> sim.c:876 received APDU (len=28 sw1=0x90 sw2=0x00) <000f> sim.c:949 command successfull <000f> sim.c:151 sending result to callback function (type=0) <0005> subscriber.c:327 received MSISDN from SIM <0005> subscriber.c:600 Requesting SIM file 0x6f42 <000f> sim.c:209 got new job: SIM_JOB_READ_RECORD (handle=00000004) <000f> sim.c:241 SELECT (file=0x6f42) <000f> sim.c:187 sending APDU (class 0xa0, ins 0xa4) <000f> sim.c:876 received APDU (len=0 sw1=0x9f sw2=0x0f) <000f> sim.c:949 command successfull <000f> sim.c:571 GET RESPONSE (len=15) <000f> sim.c:187 sending APDU (class 0xa0, ins 0xc0) <000f> sim.c:876 received APDU (len=15 sw1=0x90 sw2=0x00) <000f> sim.c:949 command successfull <000f> sim.c:1060 selected record (len 42 structure 1) <000f> sim.c:312 READ RECORD (rec_no=1 mode=4 len=42) <000f> sim.c:187 sending APDU (class 0xa0, ins 0xb2) <000f> sim.c:876 received APDU (len=42 sw1=0x90 sw2=0x00) <000f> sim.c:949 command successfull <000f> sim.c:151 sending result to callback function (type=0) <0005> subscriber.c:357 received SMSP from SIM (sca=+34609090909) <0005> subscriber.c:560 (ms 1) Done reading SIM card (IMSI=214075542695571 Spain, movistar) <0005> subscriber.c:572 -> SIM card registered to 214 07 (Spain, movistar) <0005> gsm48_mm.c:4388 (ms 1) Received 'MMR_REG_REQ' event <0002> gsm322.c:3818 (ms 1) Event 'EVENT_SIM_INSERT' for automatic PLMN selection in state 'A0 null' <000e> gsm322.c:1378 Start search of last registered PLMN (mcc=214 mnc=07 Spain, movistar) <0002> gsm322.c:1382 Use RPLMN (mcc=214 mnc=07 Spain, movistar) <0002> gsm322.c:806 new state 'A0 null' -> 'A1 trying RPLMN' <0003> gsm322.c:4049 (ms 1) Event 'EVENT_NEW_PLMN' for Cell selection in state 'C0 null' <000e> gsm322.c:3631 Selecting PLMN (mcc=214 mnc=07 Spain, movistar) <0003> gsm322.c:3637 Start stored cell selection. <0003> gsm322.c:829 new state 'C0 null' -> 'C2 stored cell selection' <0003> gsm322.c:2793 Scanning power for stored BA list. <0003> gsm322.c:2861 Scanning frequencies. (3..3) <0003> gsm322.c:2910 Found signal (ARFCN 3 rxlev -90 (20)) <0003> gsm322.c:2922 Done with power scanning range. <0003> gsm322.c:2793 Scanning power for stored BA list. <0003> gsm322.c:2861 Scanning frequencies. (5..5) <0003> gsm322.c:2910 Found signal (ARFCN 5 rxlev -82 (28)) <0003> gsm322.c:2922 Done with power scanning range. <0003> gsm322.c:2793 Scanning power for stored BA list. <0003> gsm322.c:2861 Scanning frequencies. (7..8) <0003> gsm322.c:2910 Found signal (ARFCN 7 rxlev -101 (9)) <0003> gsm322.c:2910 Found signal (ARFCN 8 rxlev -86 (24)) <0003> gsm322.c:2922 Done with power scanning range. <0003> gsm322.c:2793 Scanning power for stored BA list. <0003> gsm322.c:2861 Scanning frequencies. (10..19) <0003> gsm322.c:2910 Found signal (ARFCN 10 rxlev -81 (29)) <0003> gsm322.c:2910 Found signal (ARFCN 11 rxlev -88 (22)) <0003> gsm322.c:2910 Found signal (ARFCN 12 rxlev -76 (34)) <0003> gsm322.c:2910 Found signal (ARFCN 13 rxlev -57 (53)) <0003> gsm322.c:2910 Found signal (ARFCN 14 rxlev -75 (35)) <0003> gsm322.c:2910 Found signal (ARFCN 15 rxlev -77 (33)) <0003> gsm322.c:2910 Found signal (ARFCN 16 rxlev -98 (12)) <0003> gsm322.c:2910 Found signal (ARFCN 17 rxlev -97 (13)) <0003> gsm322.c:2910 Found signal (ARFCN 18 rxlev -73 (37)) <0003> gsm322.c:2910 Found signal (ARFCN 19 rxlev -92 (18)) <0003> gsm322.c:2922 Done with power scanning range. <0003> gsm322.c:2793 Scanning power for stored BA list. <0003> gsm322.c:2861 Scanning frequencies. (21..22) <0003> gsm322.c:2910 Found signal (ARFCN 21 rxlev -93 (17)) <0003> gsm322.c:2910 Found signal (ARFCN 22 rxlev -87 (23)) <0003> gsm322.c:2922 Done with power scanning range. <0003> gsm322.c:2793 Scanning power for stored BA list. <0003> gsm322.c:2861 Scanning frequencies. (69..69) <0003> gsm322.c:2910 Found signal (ARFCN 69 rxlev -101 (9)) <0003> gsm322.c:2922 Done with power scanning range. <0003> gsm322.c:2793 Scanning power for stored BA list. <0003> gsm322.c:2836 Found 17 frequencies. <0003> gsm322.c:2255 Scanning frequency 13 (rxlev -57). <0003> gsm322.c:474 Sync to ARFCN=13 rxlev=-57 (No sysinfo yet, ccch mode NONE) <0003> gsm322.c:2947 Channel synched. (ARFCN=13, snr=16, BSIC=7) <0003> gsm322.c:698 Starting CS timer with 4 seconds. <0001> gsm322.c:2968 using DSC of 90 <0003> gsm48_rr.c:4820 Channel provides data. <0003> gsm322.c:698 Starting CS timer with 4 seconds. <0001> gsm48_rr.c:1882 New SYSTEM INFORMATION 2ter <0001> sysinfo.c:705 New SYSTEM INFORMATION 3 (mcc 214 mnc 07 lac 0x0b58) <0001> gsm48_rr.c:1916 Changing CCCH_MODE to 1 <0001> gsm48_rr.c:2159 PAGING ignored, we are not camping. <0001> gsm48_rr.c:2214 PAGING ignored, we are not camping. <0001> gsm48_rr.c:2159 PAGING ignored, we are not camping. <0001> gsm48_rr.c:1950 New SYSTEM INFORMATION 4 (mcc 214 mnc 07 lac 0x0b58) <0001> gsm48_rr.c:2159 PAGING ignored, we are not camping. <0001> gsm48_rr.c:2159 PAGING ignored, we are not camping. <0001> gsm48_rr.c:2159 PAGING ignored, we are not camping. <0001> gsm48_rr.c:2159 PAGING ignored, we are not camping. <0001> gsm48_rr.c:2159 PAGING ignored, we are not camping. <0001> sysinfo.c:616 Now updating previously received SYSTEM INFORMATION 4 <0001> gsm48_rr.c:1795 New SYSTEM INFORMATION 1 <0001> gsm48_rr.c:2159 PAGING ignored, we are not camping. <0001> gsm48_rr.c:2159 PAGING ignored, we are not camping. <0001> gsm48_rr.c:2159 PAGING ignored, we are not camping. <0001> gsm48_rr.c:2159 PAGING ignored, we are not camping. <0001> gsm48_rr.c:1824 New SYSTEM INFORMATION 2 <0003> gsm322.c:2714 Received relevant sysinfo. <0003> gsm322.c:708 stopping pending CS timer. <0003> gsm322.c:2325 Scan frequency 13: Cell found. (rxlev -57 mcc 214 mnc 07 lac 0b58) <0003> gsm322.c:1836 Select using access class <0003> gsm322.c:379 A (RLA_C (-57) - RXLEV_ACC_MIN (-102)) = 45 <0003> gsm322.c:381 B (MS_TXPWR_MAX_CCH (33) - p (33)) = 0 <0003> gsm322.c:382 C1 (A - MAX(B,0)) = 45 <0003> gsm322.c:1955 Cell ARFCN 13: Cell found, (rxlev=-57 mcc=214 mnc=07 lac=0b58 Spain, movistar) <0003> gsm322.c:1966 Cell ARFCN 13 selected. <0003> gsm322.c:2423 Tune to frequency 13. <0003> gsm322.c:468 Sync to ARFCN=13 rxlev=-57 (Sysinfo, ccch mode NON-COMB) <0003> gsm322.c:2450 Cell available. <0003> gsm322.c:4049 (ms 1) Event 'EVENT_CELL_FOUND' for Cell selection in state 'C2 stored cell selection' <000e> gsm322.c:3383 Camping normally on cell (ARFCN=13 mcc=214 mnc=07 Spain, movistar) <0003> gsm322.c:829 new state 'C2 stored cell selection' -> 'C3 camped normally' <0005> gsm48_mm.c:4320 (ms 1) Received 'MM_EVENT_CELL_SELECTED' event in state MM IDLE, PLMN search <0005> gsm48_mm.c:909 new MM IDLE state PLMN search -> location updating needed <0005> gsm48_mm.c:909 new MM IDLE state location updating needed -> attempting to update <0005> gsm48_mm.c:426 starting T3212 (periodic loc. upd. delay) with 14400 seconds <0005> gsm48_mm.c:2287 Do Loc. upd. for IMSI attach. <000e> gsm48_mm.c:2208 Perform location update (MCC 214, MNC 07 LAC 0x0b58) <0005> gsm48_mm.c:2342 LOCATION UPDATING REQUEST <0005> gsm48_mm.c:2364 using LAI (mcc 214 mnc 07 lac 0x0b58) <0005> gsm48_mm.c:2372 using TMSI 0x8800ea74 <0005> gsm48_mm.c:914 new state MM IDLE, attempting to update -> wait for RR connection (location updating) <0001> gsm48_rr.c:5449 (ms 1) Message 'RR_EST_REQ' received in state idle (sapi 0) <000e> gsm48_rr.c:1307 Establish radio link due to mobility management request <0003> gsm322.c:4049 (ms 1) Event 'EVENT_LEAVE_IDLE' for Cell selection in state 'C3 camped normally' <0003> gsm322.c:829 new state 'C3 camped normally' -> 'connected mode 1' <0003> gsm322.c:3665 Going to camping (normal) ARFCN 13. <0003> gsm322.c:452 Sync to ARFCN=13, but there is a sync already pending <0001> gsm48_rr.c:355 new state idle -> connection pending <0001> gsm48_rr.c:1459 CHANNEL REQUEST: 00 (Location Update no NECI) <0003> gsm322.c:2947 Channel synched. (ARFCN=13, snr=16, BSIC=7) <0001> gsm322.c:2968 using DSC of 90 <0003> gsm48_rr.c:4820 Channel provides data. <0001> gsm48_rr.c:1590 RANDOM ACCESS (requests left 5) <0001> gsm48_rr.c:1647 RANDOM ACCESS (Tx-integer 10 combined no S(lots) 0 ra 0x0f) <0001> gsm48_rr.c:1686 Use MS-TXPWR-MAX-CCH power value 5 (33 dBm) msgb(0x1ed6a40): Not enough headroom msgb_push (4262630712 < 7) backtrace() returned 11 addresses /usr/local/lib/libosmocore.so.4(osmo_panic+0xb8) [0x7fb0c623e918] /usr/local/lib/libosmogsm.so.5(+0x18986) [0x7fb0c5e0a986] /usr/local/lib/libosmogsm.so.5(lapdm_phsap_up+0x188) [0x7fb0c5e0b628] ./mobile() [0x437599] ./mobile() [0x43989e] /usr/local/lib/libosmocore.so.4(osmo_wqueue_bfd_cb+0x93) [0x7fb0c623c033] /usr/local/lib/libosmocore.so.4(osmo_select_main+0x19a) [0x7fb0c623aefa] ./mobile() [0x404917] /lib/libc.so.6(__libc_start_main+0xfd) [0x7fb0c58acc8d] ./mobile() [0x404489] Signal 6 received. full talloc report on 'layer2 context' (total 31816 bytes in 30 blocks) Layer2 contains 424 bytes in 1 blocks (ref 0) 0x1ed6a40 GSM 04.08 L3 contains 456 bytes in 1 blocks (ref 0) 0x1ed7cf0 struct gsm48_sysinfo contains 1452 bytes in 1 blocks (ref 0) 0x1ed72e0 struct gsm_sub_plmn_na contains 24 bytes in 1 blocks (ref 0) 0x1ed7270 struct gsm_sub_plmn_na contains 24 bytes in 1 blocks (ref 0) 0x1ed7200 struct gsm_sub_plmn_list contains 24 bytes in 1 blocks (ref 0) 0x1ed7190 struct gsm_sub_plmn_list contains 24 bytes in 1 blocks (ref 0) 0x1ed7120 struct gsm_sub_plmn_list contains 24 bytes in 1 blocks (ref 0) 0x1ed70b0 struct gsm_sub_plmn_list contains 24 bytes in 1 blocks (ref 0) 0x1ed7040 struct gsm_sub_plmn_list contains 24 bytes in 1 blocks (ref 0) 0x1ed6fd0 struct gsm_sub_plmn_list contains 24 bytes in 1 blocks (ref 0) 0x1ed6f60 struct gsm_sub_plmn_list contains 24 bytes in 1 blocks (ref 0) 0x1ed6ef0 struct gsm_sub_plmn_list contains 24 bytes in 1 blocks (ref 0) 0x1ed6e80 struct gsm_sub_plmn_list contains 24 bytes in 1 blocks (ref 0) 0x1ed6e10 struct gsm_sub_plmn_list contains 24 bytes in 1 blocks (ref 0) 0x1ed6da0 struct gsm_sub_plmn_list contains 24 bytes in 1 blocks (ref 0) 0x1ecf440 struct gsm_sub_plmn_list contains 24 bytes in 1 blocks (ref 0) 0x1ecf3d0 struct gsm_sub_plmn_list contains 24 bytes in 1 blocks (ref 0) 0x1ecf360 struct gsm_sub_plmn_list contains 24 bytes in 1 blocks (ref 0) 0x1ecf0c0 struct gsm_sub_plmn_list contains 24 bytes in 1 blocks (ref 0) 0x1ecf050 struct gsm_sub_plmn_list contains 24 bytes in 1 blocks (ref 0) 0x1ed6650 struct gsm_sim_handler contains 32 bytes in 1 blocks (ref 0) 0x1ed68c0 struct gsm_sim_handler contains 32 bytes in 1 blocks (ref 0) 0x1ed6940 struct gsm_sim_handler contains 32 bytes in 1 blocks (ref 0) 0x1ed69c0 telnet_connection contains 1 bytes in 1 blocks (ref 0) 0x1ecf510 struct gsm322_ba_list contains 192 bytes in 1 blocks (ref 0) 0x1ed6c80 struct osmocom_ms contains 28704 bytes in 1 blocks (ref 0) 0x1ecf5d0 /root/.osmocom/bb contains 29 bytes in 1 blocks (ref 0) 0x1e6c770 main.c:240 contains 29 bytes in 1 blocks (ref 0) 0x1e6c6f0 Aborted (core dumped) Thx a lot, Yury

6 9

seL4 is open source now
by mark.neuhaus＠email.de 31 Jul '14

31 Jul '14

Hey, new to the mailing list. Two things: 1.) Probably you know, but in case not: The proven correct, highest security L4 microkernel (seL4) is under GPL since yesterday! In addition useful tools like a compatible hypervisor and dev tools are under BSD, too. See https://sel4.systems/ for general stuff or get the src on https://github.com/seL4/seL4 If I understand your research correctly, you likely have use for such an advanced kernel, to separate BB and APP system in separate containers, running on the same CPU. ... I'm a mathematician and involved in zero-bug-programming aka verified programming used in ultra secure environments and I think that this step of the NICTA research group is just awesome. I'm not entirely sure but I believe that seL4 is already used as the kernel of the "Merkel-phone" used now in Germany. 2.) I'm actually reading through your mailing list, but I have two questions which you are eventually kind to answer: a.) For what baseband chips has OsmocomBB actually working drivers (Layer1 as you call it, I think) and on what chipsets are you working to get the Layer1 in the future? It' pretty hard to get phones with the Calypso these days. b.) Is there a list of actually supported phones? I know the wiki, but non of these phones was available for me anymore. So long. Best, \mark

1 0

OsmoComBB - Burst_ind Sylvian c121 / c123
by Milinko Isakovic 30 Jul '14

30 Jul '14

Hi to all, I reacently try to install and work with OsmocomBB, and I had very strange situation. Last time I was usien it was 3 years ago. When I use branch sylvian / test... with TX enabled, phone can not find any cell avb ? I tried: 1. Sim remove 1 2. Configure terminal; ms 1; sim test; shutdown; no shutdown 3. sim remove 1 4. network seach ... and see no network. On my old compuer with sam phone, seems to me it is working ok? Any idea about this ? Milinko

1 0

Re: Error loading firmware onto Motorola C115.
by msokolov＠ivan.Harhan.ORG 30 Jul '14

30 Jul '14

Ravi Sharan <ravisharan(a)iith.ac.in> wrote: > I am trying out osmocom-bb with the Motorla C115. [...] < I get the following error: > > $ osmocon -p /dev/ttyUSB0 -m c123 > ~/osmocom-bb/src/target/firmware/board/compal_e88/hello_world.compalram.bin > [snipped the part where everything goes as it should] > got 1 bytes from modem, data looks like: 1b . > got 1 bytes from modem, data looks like: f6 . > got 1 bytes from modem, data looks like: 02 . > got 1 bytes from modem, data looks like: 00 . > got 1 bytes from modem, data looks like: 45 E > got 1 bytes from modem, data looks like: 53 S > got 1 bytes from modem, data looks like: 16 . > Received DOWNLOAD NACK from phone, something went wrong :( Try -m c123xor instead of -m c123. HTH, SF

4 6

Bounce action notification
by mailman＠lists.osmocom.org 29 Jul '14

29 Jul '14

This is a Mailman mailing list bounce action notice: List: baseband-devel Member: softwaredefinesradio(a)gmail.com Action: Subscription disabled. Reason: Excessive or fatal bounces. The triggering bounce notice is attached below. Questions? Contact the Mailman site administrator at mailman(a)lists.osmocom.org.

1 0

mobile unable to register
by tom mc loughlin 29 Jul '14

29 Jul '14

I was having problems with unable to register with real network and sim reader on the testing branch. I was advised on the list to use master branch to sort this problem, I have done this and now I get the following. <0003> gsm322.c:829 new state 'C1 normal cell selection' -> 'C3 camped normally' <0005> gsm48_mm.c:4320 (ms 1) Received 'MM_EVENT_CELL_SELECTED' event in state MM IDLE, PLMN search <0005> gsm48_mm.c:909 new MM IDLE state PLMN search -> location updating needed <0005> gsm48_mm.c:909 new MM IDLE state location updating needed -> attempting to update <0005> gsm48_mm.c:426 starting T3212 (periodic loc. upd. delay) with 21600 seconds <0005> gsm48_mm.c:2291 Do normal Loc. upd. <000e> gsm48_mm.c:2208 Perform location update (MCC 272, MNC 02 LAC 0x4e2a) <0005> gsm48_mm.c:2342 LOCATION UPDATING REQUEST <0005> gsm48_mm.c:2364 using LAI (mcc 272 mnc 02 lac 0x8cad) <0005> gsm48_mm.c:2372 using TMSI 0x49059a60 <0005> gsm48_mm.c:914 new state MM IDLE, attempting to update -> wait for RR connection (location updating) <0001> gsm48_rr.c:5449 (ms 1) Message 'RR_EST_REQ' received in state idle (sapi 0) <000e> gsm48_rr.c:1307 Establish radio link due to mobility management request <0003> gsm322.c:4049 (ms 1) Event 'EVENT_LEAVE_IDLE' for Cell selection in state 'C3 camped normally' <0003> gsm322.c:829 new state 'C3 camped normally' -> 'connected mode 1' <0003> gsm322.c:3665 Going to camping (normal) ARFCN 47. <0003> gsm322.c:452 Sync to ARFCN=47, but there is a sync already pending <0001> gsm48_rr.c:355 new state idle -> connection pending <0001> gsm48_rr.c:1454 CHANNEL REQUEST: 00 (Location Update with NECI) <0003> gsm322.c:2947 Channel synched. (ARFCN=47, snr=16, BSIC=59) <0001> gsm322.c:2968 using DSC of 90 <0003> gsm48_rr.c:4820 Channel provides data. <0001> gsm48_rr.c:1590 RANDOM ACCESS (requests left 5) <0001> gsm48_rr.c:1647 RANDOM ACCESS (Tx-integer 7 combined no S(lots) 0 ra 0x02) <0001> gsm48_rr.c:1686 Use MS-TXPWR-MAX-CCH power value 5 (33 dBm) msgb(0x89b3528): Not enough headroom msgb_push (4150577812 < 7) backtrace() returned 11 addresses /usr/local/lib/libosmocore.so.4(osmo_generate_backtrace+0x16) [0xb76df8a6] /usr/local/lib/libosmocore.so.4(osmo_panic+0x4c) [0xb76df71c] /usr/local/lib/libosmogsm.so.5(lapdm_phsap_up+0x18c) [0xb76aca4c] ./mobile() [0x808516f] ./mobile() [0x8085c39] /usr/local/lib/libosmocore.so.4(osmo_wqueue_bfd_cb+0x9e) [0xb76dc98e] /usr/local/lib/libosmocore.so.4(osmo_select_main+0x192) [0xb76db912] ./mobile() [0x804b9cc] /lib/i386-linux-gnu/i686/cmov/libc.so.6(__libc_start_main+0xe6) [0xb7541e66] ./mobile() [0x804bb99] Signal 6 received. full talloc report on 'layer2 context' (total 21588 bytes in 50 blocks) Layer2 contains 356 bytes in 1 blocks (ref 0) 0x89b3528 GSM 04.08 L3 contains 388 bytes in 1 blocks (ref 0) 0x89b6380 struct gsm322_ba_list contains 180 bytes in 1 blocks (ref 0) 0x89b3440 struct gsm48_sysinfo contains 1452 bytes in 1 blocks (ref 0) 0x89b4d60 struct gsm48_sysinfo contains 1452 bytes in 1 blocks (ref 0) 0x89b4780 struct gsm_sub_plmn_na contains 16 bytes in 1 blocks (ref 0) 0x89b3f98 struct gsm_sub_plmn_na contains 16 bytes in 1 blocks (ref 0) 0x89b3f50 struct gsm_sub_plmn_list contains 12 bytes in 1 blocks (ref 0) 0x89b3f10 struct gsm_sub_plmn_list contains 12 bytes in 1 blocks (ref 0) 0x89b3ed0 struct gsm_sub_plmn_list contains 12 bytes in 1 blocks (ref 0) 0x89b3e90 struct gsm_sub_plmn_list contains 12 bytes in 1 blocks (ref 0) 0x89b3e50 struct gsm_sub_plmn_list contains 12 bytes in 1 blocks (ref 0) 0x89b3e10 struct gsm_sub_plmn_list contains 12 bytes in 1 blocks (ref 0) 0x89b3dd0 struct gsm_sub_plmn_list contains 12 bytes in 1 blocks (ref 0) 0x89b3d90 struct gsm_sub_plmn_list contains 12 bytes in 1 blocks (ref 0) 0x89b3d50 struct gsm_sub_plmn_list contains 12 bytes in 1 blocks (ref 0) 0x89b3d10 struct gsm_sub_plmn_list contains 12 bytes in 1 blocks (ref 0) 0x89b3cd0 struct gsm_sub_plmn_list contains 12 bytes in 1 blocks (ref 0) 0x89b3c90 struct gsm_sub_plmn_list contains 12 bytes in 1 blocks (ref 0) 0x89b3c50 struct gsm_sub_plmn_list contains 12 bytes in 1 blocks (ref 0) 0x89b3c10 struct gsm_sub_plmn_list contains 12 bytes in 1 blocks (ref 0) 0x89b3bd0 struct gsm_sub_plmn_list contains 12 bytes in 1 blocks (ref 0) 0x89b3b90 struct gsm_sub_plmn_list contains 12 bytes in 1 blocks (ref 0) 0x89b3b50 struct gsm_sub_plmn_list contains 12 bytes in 1 blocks (ref 0) 0x89b3b10 struct gsm_sub_plmn_list contains 12 bytes in 1 blocks (ref 0) 0x89b3ad0 struct gsm_sub_plmn_list contains 12 bytes in 1 blocks (ref 0) 0x89b3a90 struct gsm_sub_plmn_list contains 12 bytes in 1 blocks (ref 0) 0x89b3a50 struct gsm_sub_plmn_list contains 12 bytes in 1 blocks (ref 0) 0x89b3a10 struct gsm_sub_plmn_list contains 12 bytes in 1 blocks (ref 0) 0x89b39d0 struct gsm_sub_plmn_list contains 12 bytes in 1 blocks (ref 0) 0x89b3990 struct gsm_sub_plmn_list contains 12 bytes in 1 blocks (ref 0) 0x89b3950 struct gsm_sub_plmn_list contains 12 bytes in 1 blocks (ref 0) 0x89b3910 struct gsm_sub_plmn_list contains 12 bytes in 1 blocks (ref 0) 0x89b38d0 struct gsm_sub_plmn_list contains 12 bytes in 1 blocks (ref 0) 0x89b3890 struct gsm_sub_plmn_list contains 12 bytes in 1 blocks (ref 0) 0x89aeda8 struct gsm_sub_plmn_list contains 12 bytes in 1 blocks (ref 0) 0x89aed68 struct gsm_sub_plmn_list contains 12 bytes in 1 blocks (ref 0) 0x89aebe0 struct gsm_sub_plmn_list contains 12 bytes in 1 blocks (ref 0) 0x89aeea0 struct gsm_sub_plmn_list contains 12 bytes in 1 blocks (ref 0) 0x89b31a8 SIM contains 644 bytes in 1 blocks (ref 0) 0x89b44c8 struct gsm_sim_handler contains 16 bytes in 1 blocks (ref 0) 0x89b3160 struct gsm_sim_handler contains 16 bytes in 1 blocks (ref 0) 0x89b3118 struct gsm_sim_handler contains 16 bytes in 1 blocks (ref 0) 0x89aee18 telnet_connection contains 49 bytes in 2 blocks (ref 0) 0x89aefa8 struct telnet_connection contains 48 bytes in 1 blocks (ref 0) 0x89aef38 struct gsm322_ba_list contains 180 bytes in 1 blocks (ref 0) 0x89b3358 struct osmocom_ms contains 16364 bytes in 1 blocks (ref 0) 0x89aefe0 /root/.osmocom/bb contains 29 bytes in 1 blocks (ref 0) 0x8973488 main.c:240 contains 29 bytes in 1 blocks (ref 0) 0x8973430 Aborted root@tom-ei9dl:~/osmocom-bb/src/host/layer23/src/mobile# Can some one please help me solve this. Tom

1 0

baseband-devel unsubscribe notification
by mailman-bounces＠lists.osmocom.org 28 Jul '14

28 Jul '14

devinechristophe(a)gmail.com has been removed from baseband-devel.

1 0

Re: baseband-devel Digest, Vol 54, Issue 15
by tom mc loughlin 25 Jul '14

25 Jul '14

Sylvain I am reading from osmocommbb sim reader which states the following. Reading SIM card isn't supported in master branch of osmocom-bb. To experiment with provider SIM card and network (which is possibly the easiest way to try osmocom-bb out) you will need sylvain/testing branch which you can checkout using following commands: Has this being changed and now part of the master branch. Tom On Fri, Jul 25, 2014 at 12:28 PM, <baseband-devel-request(a)lists.osmocom.org> wrote: > Send baseband-devel mailing list submissions to > baseband-devel(a)lists.osmocom.org > > To subscribe or unsubscribe via the World Wide Web, visit > https://lists.osmocom.org/mailman/listinfo/baseband-devel > or, via email, send a message with subject or body 'help' to > baseband-devel-request(a)lists.osmocom.org > > You can reach the person managing the list at > baseband-devel-owner(a)lists.osmocom.org > > When replying, please edit your Subject line so it is more specific > than "Re: Contents of baseband-devel digest..." > > Today's Topics: > > 1. Mobile testing branch (tom mc loughlin) > 2. Re: Mobile testing branch (Sylvain Munaut) > 3. mobile app simulated-delay (TSAREGORODTSEV, Yury) > > > ---------- Forwarded message ---------- > From: tom mc loughlin <tomei9dl(a)gmail.com> > To: baseband-devel(a)lists.osmocom.org > Cc: > Date: Fri, 25 Jul 2014 11:25:40 +0100 > Subject: Mobile testing branch > Hi all > I have built Osmocommbb with testing branch and I want to run Mobile app > allowing me to make a call via my local network. > All goes well in the build but I am unable to register on my own network > while using a genuine network sim. > This is output from my compal_e88/layer1.compalram.bin. > As you can see all looks good with signal levels fairly ok until this > point and then level drops to -138 dbm and there it stays on all chanells. > I have tried this with 3 different sims and all is the same. > Can someone help? > Tom > bat_compal_e88_chg_state=0 > L1CTL_RESET_REQ: FULL!SIM Request (7): a0 a4 00 00 02 3f 00 > SIM Response (2): 9f 20 > SIM Request (5): a0 c0 00 00 20 > SIM Response (34): 00 00 02 b7 3f 00 01 00 00 00 00 00 13 b3 05 0a 04 00 > 83 8a 83 8a 00 03 00 00 02 b7 00 00 02 b7 90 00 > SIM Request (7): a0 a4 00 00 02 2f e2 > SIM Response (2): 9f 0f > SIM Request (5): a0 c0 00 00 0f > SIM Response (17): 00 00 00 0a 2f e2 04 00 0f 00 ff 01 02 00 00 90 00 > SIM Request (5): a0 b0 00 00 0a > SIM Response (12): 98 53 03 11 02 08 22 45 65 f6 90 00 > SIM Request (7): a0 a4 00 00 02 7f 20 > SIM Response (2): 9f 20 > SIM Request (5): a0 c0 00 00 20 > SIM Response (34): 00 00 00 00 7f 20 02 00 00 00 00 00 13 b3 00 23 04 00 > 83 8a 83 8a 00 03 00 00 02 b7 00 00 00 00 90 00 > SIM Request (7): a0 a4 00 00 02 6f 07 > SIM Response (2): 9f 0f > SIM Request (5): a0 c0 00 00 0f > SIM Response (17): 00 00 00 09 6f 07 04 00 14 00 14 01 02 00 00 90 00 > SIM Request (5): a0 b0 00 00 09 > SIM Response (11): 08 29 27 10 17 21 89 26 33 90 00 > SIM Request (7): a0 a4 00 00 02 6f 7e > SIM Response (2): 9f 0f > SIM Request (5): a0 c0 00 00 0f > SIM Response (17): 00 00 00 0b 6f 7e 04 00 11 00 14 01 02 00 00 90 00 > SIM Request (5): a0 b0 00 00 0b > SIM Response (13): ff ff ff ff 72 f2 60 ff fe 00 03 90 00 > SIM Request (7): a0 a4 00 00 02 6f 20 > SIM Response (2): 9f 0f > SIM Request (5): a0 c0 00 00 0f > SIM Response (17): 00 00 00 09 6f 20 04 00 11 00 44 01 02 00 00 90 00 > SIM Request (5): a0 b0 00 00 09 > SIM Response (11): ff ff ff ff ff ff ff ff 07 90 00 > SIM Request (7): a0 a4 00 00 02 6f 30 > SIM Response (2): 9f 0f > SIM Request (5): a0 c0 00 00 0f > SIM Response (17): 00 00 01 2c 6f 30 04 00 11 00 44 01 02 00 00 90 00 > SIM Request (5): a0 b0 00 00 2c > SIM Response (46): 32 f4 51 02 f8 01 12 f4 60 12 f4 10 62 f2 20 02 f4 40 > 22 f2 01 02 f6 10 22 f8 10 72 f0 77 62 f8 10 42 f0 80 32 f8 10 02 f2 50 32 > f2 90 00 > BAT-ADC: 593 6 0 0 1023 353 327 277 > Charger at 51 mV. > > PM MEAS: ARFCN=1016, 33 dBm at baseband, -104 dBm at RF > PM MEAS: ARFCN=1017, 33 dBm at baseband, -104 dBm at RF > PM MEAS: ARFCN=1018, 29 dBm at baseband, -108 dBm at RF > PM MEAS: ARFCN=1019, 29 dBm at baseband, -108 dBm at RF > PM MEAS: ARFCN=1020, 28 dBm at baseband, -109 dBm at RF > PM MEAS: ARFCN=1021, 29 dBm at baseband, -108 dBm at RF > PM MEAS: ARFCN=1022, 27 dBm at baseband, -110 dBm at RF > PM MEAS: ARFCN=1023, 39 dBm at baseband, -98 dBm at RF > L1CTL_RESET_REQ: FULL!L1CTL_FBSB_REQ (arfcn=1, flags=0x7) > Starting FCCH RecognitionFB0 (3859:4): TOA= 3792, Power= -88dBm, > Angle=-1361Hz > DSP Error Status: 256 > FB1 (3869:8): TOA= 8751, Power= -88dBm, Angle= -36Hz > fn_offset=3867 (fn=3869 + attempt=8 + ntdma = 6) > delay=8 (fn_offset=3867 + 11 - fn=3869 - 1 > scheduling next FB/SB detection task with delay 8 > =>FB @ FNR 3867 fn_offset=3867 qbits=4820 > Synchronize_TDMA > LOST 3711! > DSP Error Status: 256 > DSP Error Status: 264 > L1CTL_RESET_REQ: FULL!LOST 1893! > L1CTL_FBSB_REQ (arfcn=981, flags=0x7) > Starting FCCH RecognitionLOST 1857! > L1CTL_RESET_REQ: FULL!L1CTL_FBSB_REQ (arfcn=71, flags=0x7) > Starting FCCH RecognitionL1CTL_RESET_REQ: FULL!L1CTL_FBSB_REQ (arfcn=993, > flags=0x7) > Starting FCCH RecognitionL1CTL_RESET_REQ: FULL!LOST 1899! > L1CTL_FBSB_REQ (arfcn=979, flags=0x7) > Starting FCCH RecognitionLOST 1851! > DSP Error Status: 8 > L1CTL_RESET_REQ: FULL!L1CTL_FBSB_REQ (arfcn=4, flags=0x7) > Starting FCCH RecognitionDSP Error Status: 8 > DSP Error Status: 8 > DSP Error Status: 8 > BAT-ADC: 590 6 0 0 1023 356 330 277 > Charger at 51 mV. > Battery at 4033 mV. > Charging at 0 mA. > Battery capacity is 100%. > Battery range is 3199..3999 mV. > Battery full at 468 LSB .. full at 585 LSB > Charging at 239 LSB (204 mA). > BCICTL2=0x3ff > battery-info.flags=0x00000000 > bat_compal_e88_chg_state=0 > DSP Error Status: 8 > L1CTL_RESET_REQ: FULL!L1CTL_FBSB_REQ (arfcn=1023, flags=0x7) > Starting FCCH RecognitionDSP Error Status: 8 > DSP Error Status: 8 > DSP Error Status: 8 > DSP Error Status: 8 > L1CTL_RESET_REQ: FULL!LOST 1900! > L1CTL_FBSB_REQ (arfcn=980, flags=0x7) > Starting FCCH RecognitionLOST 1850! > DSP Error Status: 8 > DSP Error Status: 8 > DSP Error Status: 8 > DSP Error Status: 8 > L1CTL_RESET_REQ: FULL!L1CTL_FBSB_REQ (arfcn=78, flags=0x7) > Starting FCCH RecognitionDSP Error Status: 8 > DSP Error Status: 8 > DSP Error Status: 8 > DSP Error Status: 8 > L1CTL_RESET_REQ: FULL!L1CTL_FBSB_REQ (arfcn=53, flags=0x7) > LOST 1880! > Starting FCCH RecognitionLOST 1870! > DSP Error Status: 8 > DSP Error Status: 8 > DSP Error Status: 8 > DSP Error Status: 8 > L1CTL_RESET_REQ: FULL!L1CTL_FBSB_REQ (arfcn=69, flags=0x7) > Starting FCCH RecognitionDSP Error Status: 8 > DSP Error Status: 8 > DSP Error Status: 8 > DSP Error Status: 8 > L1CTL_RESET_REQ: FULL!L1CTL_FBSB_REQ (arfcn=94, flags=0x7) > Starting FCCH RecognitionDSP Error Status: 8 > DSP Error Status: 8 > DSP Error Status: 8 > DSP Error Status: 8 > L1CTL_RESET_REQ: FULL!L1CTL_FBSB_REQ (arfcn=57, flags=0x7) > Starting FCCH RecognitionDSP Error Status: 8 > DSP Error Status: 8 > DSP Error Status: 8 > DSP Error Status: 8 > L1CTL_RESET_REQ: FULL!L1CTL_FBSB_REQ (arfcn=985, flags=0x7) > Starting FCCH RecognitionDSP Error Status: 8 > DSP Error Status: 8 > DSP Error Status: 8 > DSP Error Status: 8 > L1CTL_RESET_REQ: FULL!L1CTL_FBSB_REQ (arfcn=970, flags=0x7) > Starting FCCH RecognitionDSP Error Status: 8 > DSP Error Status: 8 > DSP Error Status: 8 > DSP Error Status: 8 > L1CTL_RESET_REQ: FULL!L1CTL_FBSB_REQ (arfcn=45, flags=0x7) > Starting FCCH RecognitionDSP Error Status: 8 > DSP Error Status: 8 > DSP Error Status: 8 > DSP Error Status: 8 > L1CTL_RESET_REQ: FULL!L1CTL_FBSB_REQ (arfcn=43, flags=0x7) > Starting FCCH RecognitionDSP Error Status: 8 > DSP Error Status: 8 > DSP Error Status: 8 > DSP Error Status: 8 > L1CTL_RESET_REQ: FULL!L1CTL_FBSB_REQ (arfcn=33, flags=0x7) > Starting FCCH RecognitionDSP Error Status: 8 > DSP Error Status: 8 > DSP Error Status: 8 > DSP Error Status: 8 > L1CTL_RESET_REQ: FULL!L1CTL_FBSB_REQ (arfcn=7, flags=0x7) > Starting FCCH RecognitionDSP Error Status: 8 > DSP Error Status: 8 > DSP Error Status: 8 > DSP Error Status: 8 > L1CTL_RESET_REQ: FULL!L1CTL_FBSB_REQ (arfcn=988, flags=0x7) > Starting FCCH RecognitionDSP Error Status: 8 > DSP Error Status: 8 > DSP Error Status: 8 > DSP Error Status: 8 > L1CTL_RESET_REQ: FULL!L1CTL_FBSB_REQ (arfcn=971, flags=0x7) > Starting FCCH RecognitionDSP Error Status: 8 > DSP Error Status: 8 > DSP Error Status: 8 > DSP Error Status: 8 > L1CTL_RESET_REQ: FULL!L1CTL_FBSB_REQ (arfcn=969, flags=0x7) > Starting FCCH RecognitionDSP Error Status: 8 > DSP Error Status: 8 > DSP Error Status: 8 > DSP Error Status: 8 > L1CTL_RESET_REQ: FULL!L1CTL_FBSB_REQ (arfcn=42, flags=0x7) > Starting FCCH RecognitionDSP Error Status: 8 > DSP Error Status: 8 > DSP Error Status: 8 > DSP Error Status: 8 > L1CTL_RESET_REQ: FULL!L1CTL_FBSB_REQ (arfcn=40, flags=0x7) > Starting FCCH RecognitionDSP Error Status: 8 > DSP Error Status: 8 > DSP Error Status: 8 > DSP Error Status: 8 > L1CTL_RESET_REQ: FULL!L1CTL_FBSB_REQ (arfcn=32, flags=0x7) > Starting FCCH RecognitionDSP Error Status: 8 > DSP Error Status: 8 > BAT-ADC: 592 6 0 0 1023 353 327 270 > Charger at 51 mV. > Battery at 4047 mV. > Charging at 0 mA. > Battery capacity is 100%. > Battery range is 3199..3999 mV. > Battery full at 468 LSB .. full at 585 LSB > Charging at 239 LSB (204 mA). > BCICTL2=0x3ff > battery-info.flags=0x00000000 > bat_compal_e88_chg_state=0 > DSP Error Status: 8 > DSP Error Status: 8 > L1CTL_RESET_REQ: FULL!L1CTL_FBSB_REQ (arfcn=85, flags=0x7) > Starting FCCH RecognitionDSP Error Status: 8 > DSP Error Status: 8 > DSP Error Status: 8 > DSP Error Status: 8 > L1CTL_RESET_REQ: FULL!L1CTL_FBSB_REQ (arfcn=55, flags=0x7) > Starting FCCH RecognitionDSP Error Status: 8 > DSP Error Status: 8 > DSP Error Status: 8 > DSP Error Status: 8 > L1CTL_RESET_REQ: FULL!L1CTL_FBSB_REQ (arfcn=47, flags=0x7) > Starting FCCH RecognitionDSP Error Status: 8 > DSP Error Status: 8 > DSP Error Status: 8 > DSP Error Status: 8 > L1CTL_RESET_REQ: FULL!L1CTL_FBSB_REQ (arfcn=28, flags=0x7) > Starting FCCH RecognitionDSP Error Status: 8 > DSP Error Status: 8 > DSP Error Status: 8 > DSP Error Status: 8 > L1CTL_RESET_REQ: FULL!L1CTL_FBSB_REQ (arfcn=5, flags=0x7) > Starting FCCH RecognitionDSP Error Status: 8 > DSP Error Status: 8 > DSP Error Status: 8 > DSP Error Status: 8 > L1CTL_RESET_REQ: FULL!L1CTL_PM_REQ start=0 end=124 > DSP Error Status: 8 > PM MEAS: ARFCN=0, 0 dBm at baseband, -138 dBm at RF > DSP Error Status: 8 > PM MEAS: ARFCN=1, 0 dBm at baseband, -138 dBm at RF > DSP Error Status: 8 > PM MEAS: ARFCN=2, 0 dBm at baseband, -138 dBm at RF > DSP Error Status: 8 > PM MEAS: ARFCN=3, 0 dBm at baseband, -138 dBm at RF > DSP Error Status: 8 > PM MEAS: ARFCN=4, 0 dBm at baseband, -138 dBm at RF > DSP Error Status: 8 > PM MEAS: ARFCN=5, 0 dBm at baseband, -138 dBm at RF > DSP Error Status: 8 > PM MEAS: ARFCN=6, 0 dBm at baseband, -138 dBm at RF > DSP Error Status: 8 > PM MEAS: ARFCN=7, 0 dBm at baseband, -138 dBm at RF > DSP Error Status: 8 > PM MEAS: ARFCN=8, 0 dBm at baseband, -138 dBm at RF > DSP Error Status: 8 > PM MEAS: ARFCN=9, 0 dBm at baseband, -138 dBm at RF > DSP Error Status: 8 > PM MEAS: ARFCN=10, 0 dBm at baseband, -138 dBm at RF > DSP Error Status: 8 > PM MEAS: ARFCN=11, 0 dBm at baseband, -138 dBm at RF > DSP Error Status: 8 > PM MEAS: ARFCN=12, 0 dBm at baseband, -138 dBm at RF > DSP Error Status: 8 > PM MEAS: ARFCN=13, 0 dBm at baseband, -138 dBm at RF > DSP Error Status: 8 > PM MEAS: ARFCN=14, 0 dBm at baseband, -138 dBm at RF > DSP Error Status: 8 > PM MEAS: ARFCN=15, 0 dBm at baseband, -138 dBm at RF > DSP Error Status: 8 > PM MEAS: ARFCN=16, 0 dBm at baseband, -138 dBm at RF > DSP Error Status: 8 > PM MEAS: ARFCN=17, 0 dBm at baseband, -138 dBm at RF > DSP Error Status: 8 > PM MEAS: ARFCN=18, 0 dBm at baseband, -138 dBm at RF > DSP Error Status: 8 > PM MEAS: ARFCN=19, 0 dBm at baseband, -138 dBm at RF > DSP Error Status: 8 > PM MEAS: ARFCN=20, 0 dBm at baseband, -138 dBm at RF > DSP Error Status: 8 > PM MEAS: ARFCN=21, 0 dBm at baseband, -138 dBm at RF > DSP Error Status: 8 > PM MEAS: ARFCN=22, 0 dBm at baseband, -138 dBm at RF > DSP Error Status: 8 > PM MEAS: ARFCN=23, 0 dBm at baseband, -138 dBm at RF > DSP Error Status: 8 > PM MEAS: ARFCN=24, 0 dBm at baseband, -138 dBm at RF > DSP Error Status: 8 > PM MEAS: ARFCN=25, 0 dBm at baseband, -138 dBm at RF > DSP Error Status: 8 > PM MEAS: ARFCN=26, 0 dBm at baseband, -138 dBm at RF > DSP Error Status: 8 > PM MEAS: ARFCN=27, 0 dBm at baseband, -138 dBm at RF > DSP Error Status: 8 > PM MEAS: ARFCN=28, 0 dBm at baseband, -138 dBm at RF > DSP Error Status: 8 > PM MEAS: ARFCN=29, 0 dBm at baseband, -138 dBm at RF > DSP Error Status: 8 > > > > ---------- Forwarded message ---------- > From: Sylvain Munaut <246tnt(a)gmail.com> > To: tom mc loughlin <tomei9dl(a)gmail.com> > Cc: baseband-devel <baseband-devel(a)lists.osmocom.org> > Date: Fri, 25 Jul 2014 12:54:02 +0200 > Subject: Re: Mobile testing branch > Hi, > > > I have built Osmocommbb with testing branch and I want to run Mobile app > > allowing me to make a call via my local network. > > All goes well in the build but I am unable to register on my own network > > while using a genuine network sim. > > This is output from my compal_e88/layer1.compalram.bin. > > As you can see all looks good with signal levels fairly ok until this > point > > and then level drops to -138 dbm and there it stays on all chanells. > > I have tried this with 3 different sims and all is the same. > > Can someone help? > > Use master, not testing. > > > > > ---------- Forwarded message ---------- > From: "TSAREGORODTSEV, Yury" <yury(a)bridgecommunication.co.uk> > To: baseband-devel(a)lists.osmocom.org > Cc: > Date: Fri, 25 Jul 2014 11:28:07 +0000 (UTC) > Subject: mobile app simulated-delay > Hi, > anyone can tell why phone won't register in network > if simulated-delay more then -2 ? > > > > > Thx a lot, > Yury > > > _______________________________________________ > baseband-devel mailing list > baseband-devel(a)lists.osmocom.org > https://lists.osmocom.org/mailman/listinfo/baseband-devel > >

1 0

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

baseband-devel July 2014