your device, current supports both uplink and downlink rx
Wrong. What do you mean by 'device'? I can only receive DL bursts for now.
As soon as I integrate TDMA scheduler, it will be possible to decode raw bursts to L3 packets and forward them higher layers.
It can be further be connected to any standard L2/L3 stack for further processing
What do you mean by 'standard stack'?
Some simple applications like ccch_scan already able to tune SDR to required ARFCN and to start burst detection.
Do you have some cfile
What for? You can tune to any of surrounding carriers, and test the implementation against the real networks. Moreover you can use RTL-SDR while we don't have TX capabilities.
P.S. Please sign in to the baseband-devel mailing lists and CC to baseband-devel@lists.osmocom.org because your messages aren't displayed there.
With best regards, Vadim Yanitskiy.
Hello
Wrong. What do you mean by 'device'?
Sorry for that. I mean your baseband application is only able to decode both uplink as well as downlink?
I can only receive DL bursts for now.
What about decoding the uplink? I believe integrating the TDMA scheduler will enable it right?
What do you mean by 'standard stack'?
By standard stack I meant the ccch_scan itself.
What for? You can tune to any of surrounding carriers, and test the implementation against the real networks. Moreover you can use RTL-SDR while we don't have TX capabilities.
I will try that
P.S. Please sign in to the baseband-devel mailing lists and CC to baseband-devel@lists.osmocom.orgmailto:baseband-devel@lists.osmocom.org because your messages aren't displayed there.
Already did that, so I am able to receive other messages from the group.
BR Snehasish
Wrong. What do you mean by 'device'?
I mean your baseband application is only able to decode both uplink as well as downlink? What about decoding the uplink? I believe integrating the TDMA scheduler will enable it right?
We don't need to decode UL on MS side. Please, don't cause me to repeat myself: only DL is supported for now. We need to decode DL bursts, and to encode UL messages.
With best regards, Vadim Yanitskiy.
baseband-devel@lists.osmocom.org
-
Snehasish Kar -
Vadim Yanitskiy