Hi,
Don't get me wrong, but your current description sounds like "I have a problem, but I wouldn't say any details about that". Please provide at least mobile application logs, and also try to figure out some things yourself:
1) What is difference between both SIM cards you use? 2) Does mobile with "non-working" SIM perform successful LU? 3) Does mobile with "non-working" SIM receive any Paging Request? 4) Does one answer to Paging Request by sending Paging Response? 5) Then, does the L1 switch to a dedicated channel? 6) What is happening on a dedicated channel? 7) ... ?
OsmocomBB is not for end users, so you should do / learn a lot of things yourself. After all, the source code is always available.
With best regards, Vadim Yanitskiy.
Hi,
On May 6, 2017, at 1:33 AM, Vadim Yanitskiy axilirator@gmail.com wrote:
Hi,
Don't get me wrong, but your current description sounds like "I have a problem, but I wouldn't say any details about that". Please provide at least mobile application logs, and also try to figure out some things yourself:
- What is difference between both SIM cards you use?
both SIM cards are the same (only imsi is different)
- Does mobile with "non-working" SIM perform successful LU?
Yes, it connects normally and can perform calls and send SMS.
- Does mobile with "non-working" SIM receive any Paging Request?
No, nothing is received.
I had the same problem but couldn’t fix it. I guess nothing could be done.
On May 6, 2017, at 10:27 AM, samir samir.s.abed@gmail.com wrote:
Hi,
On May 6, 2017, at 1:33 AM, Vadim Yanitskiy axilirator@gmail.com wrote:
Hi,
Don't get me wrong, but your current description sounds like "I have a problem, but I wouldn't say any details about that". Please provide at least mobile application logs, and also try to figure out some things yourself:
- What is difference between both SIM cards you use?
both SIM cards are the same (only imsi is different)
- Does mobile with "non-working" SIM perform successful LU?
Yes, it connects normally and can perform calls and send SMS.
- Does mobile with "non-working" SIM receive any Paging Request?
No, nothing is received.
I need some help at least where I must start. I want to modify the code to fix this problem.
On May 9, 2017, at 4:05 PM, robert robert.steve07@gmail.com wrote:
I had the same problem but couldn’t fix it. I guess nothing could be done.
On May 6, 2017, at 10:27 AM, samir samir.s.abed@gmail.com wrote:
Hi,
On May 6, 2017, at 1:33 AM, Vadim Yanitskiy axilirator@gmail.com wrote:
Hi,
Don't get me wrong, but your current description sounds like "I have a problem, but I wouldn't say any details about that". Please provide at least mobile application logs, and also try to figure out some things yourself:
- What is difference between both SIM cards you use?
both SIM cards are the same (only imsi is different)
- Does mobile with "non-working" SIM perform successful LU?
Yes, it connects normally and can perform calls and send SMS.
- Does mobile with "non-working" SIM receive any Paging Request?
No, nothing is received.
I made some research and tests and found the following:
- the mobile can connect normally and to any BTS near it and perform calls and send SMS without any problem. - when I try to call it from another phone, it doesn’t get paged and the operator informs me that the called mobile phone cannot be reached. - it doesn’t receive any SMS. - the only time it can get paged is immediately after it connects to the BTS or right after ending a call. For example if I call a number using the motorola, just after hanging if someone calls the motorola it will receive the call. - I read a little about paging groups so I edited the mobile code to print the value of the time slot, it is always 0 so maybe this is the problem.
On May 16, 2017, at 11:14 AM, Vadim Yanitskiy axilirator@gmail.com wrote:
Hi,
Please provide at least mobile application logs
What are you waiting for? :)
With best regards, Vadim Yanitskiy.
I'm sorry to step into this, but I couldn't stop myself as this is getting a little bit ridiculous: Please provide exactly the output of the mobile application (the log) in text form (no screenshots please) so we can see what's going on in your setup.
Cheers,
Domi
2017. máj. 16. dátummal, 10:42 időpontban samir samir.s.abed@gmail.com írta:
I made some research and tests and found the following:
- the mobile can connect normally and to any BTS near it and perform calls and send SMS without any problem.
- when I try to call it from another phone, it doesn’t get paged and the operator informs me that the called mobile phone cannot be reached.
- it doesn’t receive any SMS.
- the only time it can get paged is immediately after it connects to the BTS or right after ending a call. For example if I call a number using the motorola, just after hanging if someone calls the motorola it will receive the call.
- I read a little about paging groups so I edited the mobile code to print the value of the time slot, it is always 0 so maybe this is the problem.
On May 16, 2017, at 11:14 AM, Vadim Yanitskiy axilirator@gmail.com wrote:
Hi,
Please provide at least mobile application logs
What are you waiting for? :)
With best regards, Vadim Yanitskiy.
I connected the phone and tried to call it. The log is attached.
On May 16, 2017, at 11:50 AM, Tomcsányi, Domonkos domi@tomcsanyi.net wrote:
I'm sorry to step into this, but I couldn't stop myself as this is getting a little bit ridiculous: Please provide exactly the output of the mobile application (the log) in text form (no screenshots please) so we can see what's going on in your setup.
Cheers,
Domi
- máj. 16. dátummal, 10:42 időpontban samir samir.s.abed@gmail.com írta:
I made some research and tests and found the following:
- the mobile can connect normally and to any BTS near it and perform calls and send SMS without any problem.
- when I try to call it from another phone, it doesn’t get paged and the operator informs me that the called mobile phone cannot be reached.
- it doesn’t receive any SMS.
- the only time it can get paged is immediately after it connects to the BTS or right after ending a call. For example if I call a number using the motorola, just after hanging if someone calls the motorola it will receive the call.
- I read a little about paging groups so I edited the mobile code to print the value of the time slot, it is always 0 so maybe this is the problem.
On May 16, 2017, at 11:14 AM, Vadim Yanitskiy axilirator@gmail.com wrote:
Hi,
Please provide at least mobile application logs
What are you waiting for? :)
With best regards, Vadim Yanitskiy.
Hi,
Did the logs that I provided help ?
On May 16, 2017, at 11:14 AM, Vadim Yanitskiy axilirator@gmail.com wrote:
Hi,
Please provide at least mobile application logs
What are you waiting for? :)
With best regards, Vadim Yanitskiy.
Something has changed recently as my phone is not paged at all even when using the SIM cards that were previously working fine. Now all my SIM cards do not receive calls. I didn’t change anything in the configuration since the last time it was working.
On Jun 1, 2017, at 10:30 AM, Vadim Yanitskiy axilirator@gmail.com wrote:
Hi,
Did the logs that I provided help ?
I had a quick look only, so for now I can say nothing. If I find something, I'll let you know.
With best regards, Vadim Yanitskiy.
Are you registered to the network succesfully? Does a Location Update happen?
Cheers, Domi
2017. jún. 1. dátummal, 11:28 időpontban samir samir.s.abed@gmail.com írta:
Something has changed recently as my phone is not paged at all even when using the SIM cards that were previously working fine. Now all my SIM cards do not receive calls. I didn’t change anything in the configuration since the last time it was working.
On Jun 1, 2017, at 10:30 AM, Vadim Yanitskiy axilirator@gmail.com wrote:
Hi,
Did the logs that I provided help ?
I had a quick look only, so for now I can say nothing. If I find something, I'll let you know.
With best regards, Vadim Yanitskiy.
Yes, I can register normally and make outgoing calls without any problem. Also location update is done periodically with success. Calls are received only if they occur immediately after the location update (before the phone releases the channel).
On Jun 1, 2017, at 1:01 PM, Tomcsányi, Domonkos domi@tomcsanyi.net wrote:
Are you registered to the network succesfully? Does a Location Update happen?
Cheers, Domi
- jún. 1. dátummal, 11:28 időpontban samir samir.s.abed@gmail.com írta:
Something has changed recently as my phone is not paged at all even when using the SIM cards that were previously working fine. Now all my SIM cards do not receive calls. I didn’t change anything in the configuration since the last time it was working.
On Jun 1, 2017, at 10:30 AM, Vadim Yanitskiy axilirator@gmail.com wrote:
Hi,
Did the logs that I provided help ?
I had a quick look only, so for now I can say nothing. If I find something, I'll let you know.
With best regards, Vadim Yanitskiy.
Send a .pcap capture of the initial phone registering (and long enough to include all the SI messages broadcasted by the cell).
Cheers,
Sylvain
Is it possible to manually give the MS a timeslot number to listen to after it has performed location update ? So basically when it starts listening to paging requests I could tell it to be on tn 2 for example.
baseband-devel@lists.osmocom.org