Try the command sudo ldconfig and then load binary on your phone.
On Thursday, February 28, 2013, Erich Dachleger wrote:
Thanks for the answers. It was the spaces between "../ ../" and the first commandline that was the errorcause. erich
On Thu, Feb 28, 2013 at 1:01 PM, Erich Dachleger edachleger@yahoo.com wrote:
./osmocon -p /dev/ttyUSB0 -m c123xor -c ../ ../target/firmware/board/compal_e88/trx.compalram.bin ../ ../target/firmware/board/compal_e88/chainload.highram.bin
If I am not wrong, compalram image should be loaded as argument, while highram image should be passed to -c, so this command is wrong.
I also tried switching highram-compalram: ./osmocon -p /dev/ttyUSB0 -m c123xor -c ../ ../target/firmware/board/compal_e88/trx.highram.bin ../ ../target/firmware/board/compal_e88/chainload.compalram.bin
That should be right: you're loading the chainloader that loads the trx. This looks like the command I used to load the TRX. But if you're getting the message "no such file" you're probably pointing to the wrong file names. Do an "ls" from the dir you're running the code to be sure you're pointing to right files.
Last but not least: insist. Firmwares in my phones never load at the first try. Dario.