On Thu, Feb 28, 2013 at 1:01 PM, Erich Dachleger <
edachleger@yahoo.com> wrote:
> ./osmocon -p /dev/ttyUSB0 -m c123xor -c ../
> ../target/firmware/board/compal_e88/trx.compalram.bin ../
> ../target/firmware/board/compal_e88/chainload.highram.bin
If I am not wrong, compalram image should be loaded as argument, while
highram image should be passed to -c, so this command is
wrong.
> I also tried switching highram-compalram:
> ./osmocon -p /dev/ttyUSB0 -m c123xor -c ../
> ../target/firmware/board/compal_e88/trx.highram.bin ../
> ../target/firmware/board/compal_e88/chainload.compalram.bin
>
That should be right: you're loading the chainloader that loads the
trx. This looks like the command I used to load the TRX. But if you're
getting the message "no such file" you're probably pointing to the
wrong file names. Do an "ls" from the dir you're running the code to
be sure you're pointing to right files.
Last but not least: insist. Firmwares in my phones never load at the first try.
Dario.