Hi
This weekend I had my first try with a C123, and everything seemed to work great from the start. But suddenly when uploading l1test.bin to the phone, it seems to hang after the first three ARFCN's found, like so:
[snip]
When I press any button of the phone it continues by showing the remaining ARFCNs, but nothing else:
That's probably just console buffering. If at some point the buffer was nearly full, the 'per-line' flushing will be disabled and so some lines may get stuck until the next output (which happen with the key pressed/released.
ARFCN 43: -103 dBm ARFCN 85: -103 dBm ARFCN 87: -103 dBm ARFCN 105: -103 dBm ARFCN 115: -103 dBm ARFCN 123: -103 dBm ARFCN 96: -104 dBm Starting FCCH Recognition key=12 pressed key=12 released
I also noticed the dBm values, all channels are barely above the noise floor, right?
Yes, that's also probably why there is no more output ... no way to sync to anything.
Does anybody have tips on how to get running again?
Reconnect the antenna ? That output looks like mine when I had the phone open and the antenna not connected ...
Sylvain