Hi
This weekend I had my first try with a C123, and
everything seemed to
work great from the start.
But suddenly when uploading l1test.bin to the phone, it seems to hang
after the first three ARFCN's found, like so:
[snip]
When I press any button of the phone it continues by showing the
remaining ARFCNs, but nothing else:
That's probably just console buffering. If at some point the buffer
was nearly full, the 'per-line' flushing will be disabled and so some
lines may get stuck until the next output (which happen with the key
pressed/released.
ARFCN 43: -103 dBm
ARFCN 85: -103 dBm
ARFCN 87: -103 dBm
ARFCN 105: -103 dBm
ARFCN 115: -103 dBm
ARFCN 123: -103 dBm
ARFCN 96: -104 dBm
Starting FCCH Recognition
key=12 pressed
key=12 released
I also noticed the dBm values, all channels are barely above the
noise floor, right?
Yes, that's also probably why there is no more output ... no way to
sync to anything.
Does anybody have tips on how to get running again?
Reconnect the antenna ? That output looks like mine when I had the
phone open and the antenna not connected ...
Sylvain