Thx Sylvain,
For your fast response. This turned out not to be the problem, since I did several times make clean & make distclean, after I created the toolchain, before posting:) But your response helped, in that this isn't a usual problem. Therefore smt in my setup.
Turned out problem was in my CPPFLAGS include dir. Early on, I faced a few problems with missing include files. 1 in particular <sys/_types.h> was nowhere in my system other than in Xilinx vivado, under /gcc-arm-none-eabi/. Once I removed it from CPPFLAGS osmocom-bb compiled fine (with a few warnings)
Problem solved:)
On Sun, May 13, 2018 at 10:15 AM, Sylvain Munaut 246tnt@gmail.com wrote:
I've been following the installation directions from the wiki, Getting Started. After generating the arm-none-eabi toolchain, I proceeded with make.
My guess is you first tried compiling without an arm toolchain installed and then installed the arm toolchain and didn't do a 'make clean' when retrying.
Cheers,
Sylvain