baseband-devel

baseband-devel@lists.osmocom.org

2022 discussions

about the IMSI Detach in various status
by gcc 13 Aug '12

13 Aug '12

Hi, List. I am studying the IMSI Detach attack now. I have some doubt. 1. if the victim is already off-line, what is the effect of the attack? 2. In my network, I send the IMSI detach Indication, and the base station sends me the Channel Release. but the victims is still online,why? I am confused！ -- View this message in context: http://baseband-devel.722152.n3.nabble.com/about-the-IMSI-Detach-in-various… Sent from the baseband-devel mailing list archive at Nabble.com.

1 0

Re: Any interest for Osmocom meetings in Bavaria ?
by Dieter Spaar 09 Aug '12

09 Aug '12

Hello Alexander, On Wed, 8 Aug 2012 20:44:12 +0400, "Alexander Chemeris" <alexander.chemeris(a)gmail.com> wrote: > > I'd love to join, but it strongly depends on the exact dates of the > meeting. I have very tight travel schedule in the next months. Just to avoid any misunderstanding: Those meetings are not supposed to be something similar to the Osmocom Developer Conference earlier this year. The idea is to have a regular or "on demand" oportunity to meet with people for a few hours and demonstrate or talk about the Osmocom projects or share new ideas. Its comparable to the regular Berlin meetings, you can get an idea of what goes on there: http://openbsc.osmocom.org/trac/blog/osmug-20120808 Of course you can attend, if you are close (Munich airport is 120 km away) but I would expect that Berlin is more convenient if you come from really far away and Berlin already has regular meetings. Best regards, Dieter -- Dieter Spaar, Germany spaar(a)mirider.augusta.de

1 0

Re: Any interest for Osmocom meetings in Bavaria ?
by Dieter Spaar 09 Aug '12

09 Aug '12

As a quick follow up: The proposal for the meeting is intended for everyone interested in the various Osmocom projects (e.g. OpenBSC, OsmocomBB, TETRA, SimTrace, OsmoSDR). The meeting is not limited to only those who are actively participating. I will wait until next week to see how many people are interested, so far I am aware of two persons. Best regards, Dieter -- Dieter Spaar, Germany spaar(a)mirider.augusta.de

2 1

Working of ccch_scan and capturing the SDCCH.
by Altaf 08 Aug '12

08 Aug '12

Hello Sylvain I am using the burst_ind branch and have some doubts. I am using a test network, and it has no encryption. Usually the n/w has a low load and the channel structure followed during the assignment is SDCCH/4 + SACCH/C4 or CBCH(SDCCH/4). and timeslot 0 . SDCCH is assigned on timeslot 0.. The ccch_scan is able to capture the SMS sent on timeslot 0 and also only one of the subchannel as per the above assignment. Just for testing, When I use two phones and send an SMS from both of them simultaneously both are assigned timeslot 0 and different subchannels. CCCH_scan could capture only one SMS. meaning that it could only get one subchannel. Am I right about ccch_scan or does it have the capability to get a complete timeslot. ? Thank you Altaf -- View this message in context: http://baseband-devel.722152.n3.nabble.com/Working-of-ccch-scan-and-capturi… Sent from the baseband-devel mailing list archive at Nabble.com.

5 10

Any interest for Osmocom meetings in Bavaria ?
by Dieter Spaar 08 Aug '12

08 Aug '12

I would like to ask if there is interest to have some kind of Osmocom meetings in Bavaria. Suggested location is here at my place in the south-east of Bavaria near Pfarrkirchen. There are no large cities close, but the location is still in reach with a car, some examples (single distance): - from Munich: 130 km - from Passau: 55 km - from Salzburg: 90 km - from Linz: 140 km Why at my place ? There is some GSM/3G/TETRA equipment and RF measurement gear around which could be demonstrated. It is not yet decided when and how (regular or "on demand") this meeting should take place. Before that I want to find out if there is interest at all and how many people are interested. So please write to the list what you think. Best regards, Dieter -- Dieter Spaar, Germany spaar(a)mirider.augusta.de

2 1

August 8, 8pm / Osmocom meeting in Berlin
by Harald Welte 07 Aug '12

07 Aug '12

Hi all! This is the announcement for the next Osmocom Berlin meeting. Aug 08, 8pm @ CCC Berlin, Marienstr. 11, 10113 Berlin Harald will be giving a short presentation on contemporary smartphone hardware architecture. Furthermore, updates and discussions on various current developments will be exchanged, such as * Demo of OsmoPCU on sysmoBTS * Status of new SMSC * Planning phase of custom calypso board If you are interested to show up, feel free to do so. There is no registration required. The meeting is free as in "free beer", despite no actual free beer being around. Updates and the blog post can be found here: http://openbsc.osmocom.org/trac/blog/osmug-20120808 -- - Harald Welte <laforge(a)gnumonks.org> http://laforge.gnumonks.org/ ============================================================================ "Privacy in residential applications is a desirable marketing option." (ETSI EN 300 175-7 Ch. A6)

2 2

free O2 prepaid
by jolly 07 Aug '12

07 Aug '12

15 euros for O2: 5258-9990-7370 *103*525899907370# have phun...

1 0

EMFCamp - A UK Hackcamp this summer!
by Paul Dart 01 Aug '12

01 Aug '12

Hello ! Although not entirely on topic, Harold is happy for me to post to these lists about an event I've been involved in. Electromagnetic Field is a UK hacker/maker camp that is occurring in just under a months time. In case you haven't, here's the gist: Electromagnetic Field is a non-profit three day camping festival for people with an inquisitive mind or an interest in making things: hackers, geeks, scientists, engineers, artists, and craftspeople. It's taking place in Milton Keynes between the 31st August and the 2nd September and is inspired by European camps such as the Chaos Communication Camp and Hacking At Random, which means that we have an absurd internet connection to a field, and power to every tent. There will be talks and workshops on everything from genetic modification to lockpicking, blacksmithing to high-energy physics, reverse engineering to electronic engineering, quadcopters to beer brewing and crocheting to carpentry. If you decide to talk about something, there's space for you to do so, and plenty of people who want to listen. The campsite will be littered with interesting things to play with and explore, from ride-on tanks to giant dinosaurs. And more lasers than you can shake a laser-covered stick at. Attendees are encouraged to form villages and put on activities for other people around the camp, and we're going to have villages covering everything from gaming to 3D printing. If you'd like to form a village, get in touch! https://www.emfcamp.org/tickets Your ticket will give you the following things: * A secure place to camp for three days. * Power to your tent. * Very fast internet access (both wired and wireless). * Access to running water and hot showers. * A whole pile of awesome talks and workshops by amazing people. * A full bar. * One fully programmable camp badge, equipped with wireless communications. * A campsite equipped with weird and wonderful things to play with. * A weekend unlike any other in the UK. If we've still not sold you, maybe you should read our website and blog, which have exhaustive information about the camp: https://www.emfcamp.org http://blog.emfcamp.org If you've got any questions feel free to email me or the team! Paul

1 0

cp2102 (betemcu, B75937)
by lonelysurfer 31 Jul '12

31 Jul '12

...a never ending story: i have a working ftdi-ttl, but the cp2102-adapters (http://www.ebay.de/itm/USB-2-0-to-UART-TTL-6PIN-Module-Serial-Converter-CP2…) with the same cable dont work under ubuntu or windows. if i rub the top of the 2.55mm with my finger random data appears. but the loader doesnt upload the firmware. i used the txd, rxd and gnd pins and checked the connections with a multimeter. i tested -m c123xor, -m c123 and the default firmware. flashing custom baudrates was no problem. rivers are installed correctly (stady ttyusb0 under ubuntu/ com1 under win). is there any hint? -- View this message in context: http://baseband-devel.722152.n3.nabble.com/cp2102-betemcu-B75937-tp3489336p… Sent from the baseband-devel mailing list archive at Nabble.com.

3 4

OSMOCOM RECEIVING BUT NOT SENDING DATA THROUGHT TXD - HARDWARE&SOFTWARE TESTED - GNUARM&OSMOCOM BUILT FROM OSMOCOM PAGE INSTRUCTIONS
by Filipe RC - 27 Jul '12

27 Jul '12

Hi, im having some problems in software only, that i describe bellow in my log: -FTDI based interface sold by tronix (vendor link on your site), usb2 to serial adaptor ( model TRX1227, CHIPSET FT232R ) -gnuarm&osmocom compiled from source on debian stable as per osmocom without a single problem. -ran osmocom from su (tried user as well), as instructed and as follows: $ ./osmocon -p /dev/ttyUSB0 -m c123xor ../../target/firmware/board/compal_e88/loader.compalram.bin output: whenever power button was pressed, all i got was some aparently random hex…(no expert on phone flashing here) with no getting to PROMPT1: "root@box:/home/box/osmocomm/osmocom-bb/src/host/osmocon# sudo ./osmocon -p /dev/ttyUSB0 -m c123 ../../target/firmware/board/compal_e88/loader.compalram.bin got 1 bytes from modem, data looks like: 00 . got 2 bytes from modem, data looks like: 00 00 .. got 3 bytes from modem, data looks like: 72 82 bf r.. got 1 bytes from modem, data looks like: 00 . got 1 bytes from modem, data looks like: 00 . got 1 bytes from modem, data looks like: 00 . got 1 bytes from modem, data looks like: 00 . got 1 bytes from modem, data looks like: a6 . got 1 bytes from modem, data looks like: 51 Q got 1 bytes from modem, data looks like: d2 . got 1 bytes from modem, data looks like: 51 Q got 1 bytes from modem, data looks like: b2 . got 1 bytes from modem, data looks like: a4 . got 1 bytes from modem, data looks like: 00 . got 1 bytes from modem, data looks like: 00 . got 1 bytes from modem, data looks like: 4d M got 1 bytes from modem, data looks like: a3 . got 1 bytes from modem, data looks like: 00 . got 1 bytes from modem, data looks like: 00 . got 1 bytes from modem, data looks like: 00 . got 1 bytes from modem, data looks like: 00 . got 1 bytes from modem, data looks like: 00 . 2nd press: got 1 bytes from modem, data looks like: 00 . got 1 bytes from modem, data looks like: 00 . got 1 bytes from modem, data looks like: 00 . got 1 bytes from modem, data looks like: 00 . got 1 bytes from modem, data looks like: 00 . got 1 bytes from modem, data looks like: 00 . got 1 bytes from modem, data looks like: 00 . got 1 bytes from modem, data looks like: 00 . got 1 bytes from modem, data looks like: 00 . got 1 bytes from modem, data looks like: 00 . got 1 bytes from modem, data looks like: 00 . got 1 bytes from modem, data looks like: 00 . got 1 bytes from modem, data looks like: 00 . got 1 bytes from modem, data looks like: 00 . got 1 bytes from modem, data looks like: 00 . got 1 bytes from modem, data looks like: 00 . got 1 bytes from modem, data looks like: 00 . got 1 bytes from modem, data looks like: 00 . got 1 bytes from modem, data looks like: 00 . got 1 bytes from modem, data looks like: 00 . got 1 bytes from modem, data looks like: 00 . got 1 bytes from modem, data looks like: 00 . got 1 bytes from modem, data looks like: 00 . got 1 bytes from modem, data looks like: 00 . got 1 bytes from modem, data looks like: 00 . third press: got 1 bytes from modem, data looks like: 00 . got 1 bytes from modem, data looks like: 00 . got 1 bytes from modem, data looks like: 00 . got 1 bytes from modem, data looks like: 72 r got 1 bytes from modem, data looks like: 00 . got 1 bytes from modem, data looks like: 00 . got 1 bytes from modem, data looks like: 00 . got 1 bytes from modem, data looks like: 00 . got 1 bytes from modem, data looks like: 00 . got 1 bytes from modem, data looks like: 00 . got 1 bytes from modem, data looks like: 00 . got 1 bytes from modem, data looks like: 00 . got 1 bytes from modem, data looks like: 00 . got 1 bytes from modem, data looks like: 00 . got 1 bytes from modem, data looks like: 00 . got 1 bytes from modem, data looks like: 00 . got 1 bytes from modem, data looks like: 00 . got 1 bytes from modem, data looks like: 00 . got 1 bytes from modem, data looks like: 00 . got 1 bytes from modem, data looks like: 00 . got 1 bytes from modem, data looks like: 00 . got 1 bytes from modem, data looks like: 00 . got 1 bytes from modem, data looks like: 00 . got 1 bytes from modem, data looks like: 00 . got 1 bytes from modem, data looks like: 00 . fourth press: got 1 bytes from modem, data looks like: 00 . got 1 bytes from modem, data looks like: 00 . got 1 bytes from modem, data looks like: 00 . got 1 bytes from modem, data looks like: 72 r got 1 bytes from modem, data looks like: 82 . got 1 bytes from modem, data looks like: bf . got 1 bytes from modem, data looks like: 7d } got 1 bytes from modem, data looks like: 00 . got 1 bytes from modem, data looks like: 00 . got 1 bytes from modem, data looks like: 00 . got 1 bytes from modem, data looks like: a6 . got 1 bytes from modem, data looks like: 00 . got 1 bytes from modem, data looks like: 00 . got 1 bytes from modem, data looks like: 00 . got 1 bytes from modem, data looks like: 00 . got 1 bytes from modem, data looks like: 00 . got 1 bytes from modem, data looks like: 00 . got 1 bytes from modem, data looks like: 00 . got 1 bytes from modem, data looks like: 00 . got 1 bytes from modem, data looks like: 00 . got 1 bytes from modem, data looks like: 00 . got 1 bytes from modem, data looks like: 00 . got 1 bytes from modem, data looks like: 00 . got 1 bytes from modem, data looks like: 00 . got 1 bytes from modem, data looks like: 00 . " Same output, (maybe with a few more presses) in hex, using gtkterm@115200baud,8bit,nopar,1stop: " 00 F1 00 72 82 BF 7D FD 7F 00 A6 51 D2 51 B2 A4 12 00 4D A3 A3 68 23 00 00 00 F1 00 72 82 BF 7D FD 7F 00 A6 51 D2 51 A4 A4 12 00 4D A3 A3 68 23 00 00 00 F1 00 72 82 BF 7D FD 7F 00 A6 51 D2 51 B2 A4 12 00 4D A3 A3 64 23 00 00 00 F1 00 72 82 BF 7D FD 7F 00 A6 51 D2 51 A4 A4 12 00 4D A3 A3 64 23 00 00 00 F1 00 72 82 BF 7D FD 7F 00 A6 51 D2 51 B2 A4 12 00 4D A3 A3 48 23 00 00 00 F1 00 72 82 BF 7D FD 7F 00 A6 51 D2 51 B2 A4 12 00 4D A3 A3 64 23 00 00 00 F1 00 72 82 BF 7D FD 7F 00 A6 51 D2 51 B4 A4 12 00 4D A3 A3 48 23 00 00 00 F1 00 72 82 BF 7D FD 7F 00 A6 51 D2 51 A4 A4 12 00 4D A3 A3 48 23 00 00 " -/dev/USB0 permission check - good, even chmoded 777&chown on rc.local. -cable check: thought txd was broken, but wasnt. checked from linux with a led stuck to the txd end of the jack, echo "whatever" > /dev/ttyUSB0, led did flash. -chances i put are: osmocom dependent on some specific C123 firmware? some kind of hidden compilation complication? some kind of ftdi eeprom config/bitrate/parity config missing for osmocom? I hope i have managed to be concise enough. Great work guys. Greatings from portugal, Filipe RC

1 1

Jump to page:

2026

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

baseband-devel