Please could you assist me with some pointers, Good work btw.
I am using a C115 with the T191 prolific USB cable. I can talk to the phone
but cannot load the Layer1 Stack.
I get :
./osmocon -p /dev/ttyUSB0 -m c123
../../target/firmware/board/compal_e88/layer1.compalram.bin
got 1 bytes from modem, data looks like: 00 .
got 1 bytes from modem, data looks like: 00 .
got 1 bytes from modem, data looks like: 2f /
got 1 bytes from modem, data looks like: 00 .
got 3 bytes from modem, data looks like: 1b f6 02 ...
got 1 bytes from modem, data looks like: 00 .
got 1 bytes from modem, data looks like: 41 A
got 1 bytes from modem, data looks like: 01 .
got 1 bytes from modem, data looks like: 40 @
Received PROMPT1 from phone, responding with CMD
read_file(../../target/firmware/board/compal_e88/layer1.compalram.bin):
file_size=51272, hdr_len=4, dnload_len=51279
got 1 bytes from modem, data looks like: 66 f
got 1 bytes from modem, data looks like: 74 t
got 1 bytes from modem, data looks like: 6d m
got 1 bytes from modem, data looks like: 74 t
got 1 bytes from modem, data looks like: 6f o
got 1 bytes from modem, data looks like: 6f o
got 1 bytes from modem, data looks like: 6c l
Received FTMTOOL from phone, ramloader has aborted
got 1 bytes from modem, data looks like: 65 e
got 1 bytes from modem, data looks like: 72 r
got 1 bytes from modem, data looks like: 72 r
got 1 bytes from modem, data looks like: 6f o
got 1 bytes from modem, data looks like: 72 r
got 1 bytes from modem, data looks like: 00 .
got 1 bytes from modem, data looks like: 00 .
I press the switch once and it just jumps and does the same again and again
and again.
I read that this maybe a timing issue. I have installed on 64 Bit and 32 bit
ubunto on a fast machine and the result is the same.
Also i do not see Layer23 command during compile.
Please advise me i am happy to do the debugging but any pointers would help
me as i am willing to learn from this great work that has been done by you
and the team.
Thanks
Raz
Dear Folks, After much deliberation and waiting I finally rxed a C115 and
the T1 Cable USB. I am running Backtrack 5 and have compiled the Osmocomm
bundles and all executable seem to be present.
When i plug om the Jack cable and press the power switch i get this :-
~/osmocom-bb/osmocom-bb/src/host/osmocon# ./osmocon -p /dev/ttyUSB0 -m
c123xor ../../target/firmware/board/compal_e88/layer1.compalram.bin
got 1 bytes from modem, data looks like: 00 .
got 2 bytes from modem, data looks like: 2f 00 /.
got 4 bytes from modem, data looks like: 1b f6 02 00 ....
got 1 bytes from modem, data looks like: 41 A
got 1 bytes from modem, data looks like: 01 .
got 1 bytes from modem, data looks like: 40 @
Received PROMPT1 from phone, responding with CMD
read_file(../../target/firmware/board/compal_e88/layer1.compalram.bin):
file_size=48808, hdr_len=4, dnload_len=48815
got 1 bytes from modem, data looks like: 66 f
got 1 bytes from modem, data looks like: 74 t
got 1 bytes from modem, data looks like: 6d m
got 1 bytes from modem, data looks like: 74 t
got 1 bytes from modem, data looks like: 6f o
got 1 bytes from modem, data looks like: 6f o
got 1 bytes from modem, data looks like: 6c l
Received FTMTOOL from phone, ramloader has aborted
got 1 bytes from modem, data looks like: 65 e
got 1 bytes from modem, data looks like: 72 r
got 1 bytes from modem, data looks like: 72 r
got 1 bytes from modem, data looks like: 6f o
got 1 bytes from modem, data looks like: 72 r
got 1 bytes from modem, data looks like: 00 .
got 1 bytes from modem, data looks like: 00 .
Have have tried with Xor and without. What am I missing folks - please
advice as have been at this a while now with same results.
Thanks in advance.
Raz
