Hi, I have problem with ./mobile application. When I run this application I have only information that sending APDU (class 0xa0, ins 0xa4).

Some more information: 1. At first I started layer1 firmware n motorola C115 ./osmocon -p /dev/ttyS0 -m c123xor /root/osmocom-bb/src/target/firmware/board/compal_e88/layer1.compalram.bin 2. Second I execute ./mobile ./mobile -i 224.0.0.0 3. I pressed power button on my phone. After this I received only this following information: <000e> sim.c:1206 init SIM client <0005> gsm48_cc.c:61 init Call Control <0001> gsm48_rr.c:4944 init Radio Ressource process <0004> gsm48_mm.c:1220 init Mobility Management process <0004> gsm48_mm.c:971 Selecting PLMN SEARCH state, because no SIM. <0002> gsm322.c:3471 init PLMN process <0003> gsm322.c:3472 init Cell Selection process <0003> gsm322.c:3522 Read stored BA list (mcc=260 mnc=02 Poland, Era) <0003> gsm322.c:3522 Read stored BA list (mcc=260 mnc=01 Poland, Plus) <0003> gsm322.c:3522 Read stored BA list (mcc=260 mnc=06 Poland, Play) <0003> gsm322.c:3522 Read stored BA list (mcc=260 mnc=03 Poland, Orange) Mobile '1' initialized, please start phone now! VTY available on port 4247. <0004> subscriber.c:556 Requesting SIM file 0x2fe2 <000e> sim.c:209 got new job: SIM_JOB_READ_BINARY (handle=00000004) <000e> sim.c:697 go MF <000e> sim.c:241 SELECT (file=0x3f00) <000e> sim.c:187 sending APDU (class 0xa0, ins 0xa4)

I am waiting, waiting, waiting but unfortunately without progress...

Bellow my osmocom.cfg file:

! ! OsmocomBB () configuration saved from vty !! ! line vty no login ! gps device /dev/ttyACM0 gps baudrate default no gps enable ! ms 1 layer2-socket /tmp/osmocom_l2 sap-socket /tmp/osmocom_sap sim reader network-selection-mode auto imei 000000000000000 0 imei-fixed no emergency-imsi no call-waiting no auto-answer no clip no clir tx-power auto no simulated-delay no stick location-updating codec full-speed prefer codec half-speed no abbrev support sms a5/1 a5/2 p-gsm e-gsm r-gsm dcs class-900 4 class-dcs 1 channel-capability sdcch+tchf+tchh full-speech-v1 full-speech-v2 half-speech-v1 min-rxlev -106 dsc-max 90 exit test-sim imsi 001010000000000 ki xor 00 00 00 00 00 00 00 00 00 00 00 00 no barred-access no rplmn hplmn-search foreign-country exit no shutdown exit !

Unfortunately I have no idea how to resolve this problem so please help me...

br, Grzegusz