-----Ursprüngliche Nachricht----- Von: Stefan Bauer stefan.bauer@cubewerk.de
I moved closer to the cell. I got associated to the cell with much better quality. Then the channel switch was initiated by the software - without luck - logs attached:
I tested another provider. This time Vodafone. The rx-quality is even better: (my cell #33 is -64)
<0004> gsm322.c:4783 Measurement result for ARFCN 16: -95 <0004> gsm322.c:4783 Measurement result for ARFCN 20: -93 <0004> gsm322.c:4783 Measurement result for ARFCN 21: -96 <0004> gsm322.c:4783 Measurement result for ARFCN 22: -92 <0004> gsm322.c:4783 Measurement result for ARFCN 25: -92 <0004> gsm322.c:4783 Measurement result for ARFCN 33: -64 <0004> gsm322.c:4783 Measurement result for ARFCN 34: -84 <0004> gsm322.c:4783 Measurement result for ARFCN 43: -87 <0004> gsm322.c:4783 Measurement result for ARFCN 44: -86 <0004> gsm322.c:4783 Measurement result for ARFCN 48: -81 <0004> gsm322.c:4783 Measurement result for ARFCN 49: -94 <0004> gsm322.c:4783 Measurement result for ARFCN 82: -94 <0004> gsm322.c:4783 Measurement result for ARFCN 86: -74 <0004> gsm322.c:4783 Measurement result for ARFCN 87: -93 <0004> gsm322.c:4783 Measurement result for ARFCN 88: -92 <0004> gsm322.c:4783 Measurement result for ARFCN 95: -92 <0004> gsm322.c:4783 Measurement result for ARFCN 123: -84 <0004> gsm322.c:4783 Measurement result for ARFCN 124: -79 <0004> gsm322.c:4691 RLA_C of serving cell: -55 <0004> gsm322.c:374 A (RLA_C (-55) - RXLEV_ACC_MIN (-106)) = 51 <0004> gsm322.c:376 B (MS_TXPWR_MAX_CCH (33) - p (33)) = 0 <0004> gsm322.c:377 C1 (A - MAX(B,0)) = 51 <0004> gsm322.c:400 C2 = C1 - CELL_RESELECT_OFFSET (0) = 51 (special case) <0004> gsm322.c:4746 #1 ARFCN=33 RLA_C=-64 <0004> gsm322.c:4746 #2 ARFCN=86 RLA_C=-75 <0004> gsm322.c:4746 #3 ARFCN=124 RLA_C=-80 <0004> gsm322.c:4746 #4 ARFCN=48 RLA_C=-82 <0004> gsm322.c:4746 #5 ARFCN=123 RLA_C=-82 <0004> gsm322.c:4746 #6 ARFCN=34 RLA_C=-83 <0004> gsm322.c:4569 Syncing to new neighbour cell 33.
For unknown reasons, the sync fails again:
<0003> gsm322.c:469 Sync to ARFCN=33 rxlev=-68 (No sysinfo yet, ccch mode NONE) <0003> gsm322.c:2937 Channel synched. (ARFCN=33, snr=16, BSIC=25) <0001> gsm322.c:2958 using DSC of 90 <0004> gsm322.c:4640 Synced to neighbour cell 33. <0003> gsm322.c:692 Starting CS timer with 2 seconds. <0003> gsm48_rr.c:4941 Channel provides data. <0001> gsm48_rr.c:1887 New SYSTEM INFORMATION 2 <0001> sysinfo.c:719 New SYSTEM INFORMATION 3 (mcc 262 mnc 01 lac 0x430a) <0001> gsm48_rr.c:2012 Changing CCCH_MODE to 1 <0003> gsm322.c:702 stopping pending CS timer. <0003> gsm322.c:2567 Relevant sysinfo of neighbour cell is now received or updated. <0004> gsm322.c:4661 Read from neighbour cell 33 (rxlev -68). <0004> gsm322.c:4569 Syncing to new neighbour cell 86. <0003> gsm322.c:469 Sync to ARFCN=86 rxlev=-78 (No sysinfo yet, ccch mode NONE) <0003> gsm322.c:2980 Channel sync error, try again <0003> gsm322.c:469 Sync to ARFCN=86 rxlev=-78 (No sysinfo yet, ccch mode NONE) <0003> gsm322.c:2993 Channel sync error. <0003> gsm322.c:2998 free sysinfo ARFCN=86 <0004> gsm322.c:4640 Failed to sync to neighbour cell 86. <0004> gsm322.c:4569 Syncing to new neighbour cell 124. <0003> gsm322.c:469 Sync to ARFCN=124 rxlev=-83 (No sysinfo yet, ccch mode NONE) <0003> gsm322.c:2980 Channel sync error, try again <0003> gsm322.c:469 Sync to ARFCN=124 rxlev=-83 (No sysinfo yet, ccch mode NONE) <0003> gsm322.c:2993 Channel sync error. <0003> gsm322.c:2998 free sysinfo ARFCN=124 <0004> gsm322.c:4640 Failed to sync to neighbour cell 124. <0004> gsm322.c:4569 Syncing to new neighbour cell 48. <0003> gsm322.c:469 Sync to ARFCN=48 rxlev=-83 (No sysinfo yet, ccch mode NONE) <0003> gsm322.c:2980 Channel sync error, try again <0003> gsm322.c:469 Sync to ARFCN=48 rxlev=-83 (No sysinfo yet, ccch mode NONE) <0003> gsm322.c:2993 Channel sync error. <0003> gsm322.c:2998 free sysinfo ARFCN=48 <0004> gsm322.c:4640 Failed to sync to neighbour cell 48. <0004> gsm322.c:4569 Syncing to new neighbour cell 123. <0003> gsm322.c:469 Sync to ARFCN=123 rxlev=-85 (No sysinfo yet, ccch mode NONE) <0003> gsm322.c:2980 Channel sync error, try again <0003> gsm322.c:469 Sync to ARFCN=123 rxlev=-85 (No sysinfo yet, ccch mode NONE) <0003> gsm322.c:2993 Channel sync error. <0003> gsm322.c:2998 free sysinfo ARFCN=123 <0004> gsm322.c:4640 Failed to sync to neighbour cell 123. <0004> gsm322.c:4569 Syncing to new neighbour cell 34. <0003> gsm322.c:469 Sync to ARFCN=34 rxlev=-86 (No sysinfo yet, ccch mode NONE) <0003> gsm322.c:2980 Channel sync error, try again <0003> gsm322.c:469 Sync to ARFCN=34 rxlev=-86 (No sysinfo yet, ccch mode NONE) <0003> gsm322.c:2993 Channel sync error. <0003> gsm322.c:2998 free sysinfo ARFCN=34 <0004> gsm322.c:4640 Failed to sync to neighbour cell 34. <0004> gsm322.c:4122 Re-select using access class with Emergency class. <0004> gsm322.c:4142 Checking cell of ARFCN 33 for cell re-selection. <0004> gsm322.c:374 A (RLA_C (-64) - RXLEV_ACC_MIN (-106)) = 42 <0004> gsm322.c:376 B (MS_TXPWR_MAX_CCH (33) - p (33)) = 0 <0004> gsm322.c:377 C1 (A - MAX(B,0)) = 42 <0004> gsm322.c:400 C2 = C1 - CELL_RESELECT_OFFSET (0) = 42 (special case) <0004> gsm322.c:4198 -> Cell of is in the same LA, so CRH = 0 <0004> gsm322.c:4142 Checking cell of ARFCN 86 for cell re-selection. <0004> gsm322.c:4164 Skip cell: There are no system informations available. <0004> gsm322.c:4142 Checking cell of ARFCN 124 for cell re-selection. <0004> gsm322.c:4164 Skip cell: There are no system informations available. <0004> gsm322.c:4142 Checking cell of ARFCN 48 for cell re-selection. <0004> gsm322.c:4164 Skip cell: There are no system informations available. <0004> gsm322.c:4142 Checking cell of ARFCN 123 for cell re-selection. <0004> gsm322.c:4164 Skip cell: There are no system informations available. <0004> gsm322.c:4142 Checking cell of ARFCN 34 for cell re-selection. <0004> gsm322.c:4164 Skip cell: There are no system informations available. <0004> gsm322.c:4624 Syncing back to serving cell <0003> gsm322.c:463 Sync to ARFCN=46 rxlev=-56 (Sysinfo, ccch mode NON-COMB) <0001> gsm48_rr.c:679 MON: no cell info <0003> gsm322.c:2980 Channel sync error, try again <0003> gsm322.c:463 Sync to ARFCN=46 rxlev=-56 (Sysinfo, ccch mode NON-COMB) <0003> gsm322.c:2980 Channel sync error, try again <0003> gsm322.c:463 Sync to ARFCN=46 rxlev=-56 (Sysinfo, ccch mode NON-COMB) <0003> gsm322.c:2993 Channel sync error. <0003> gsm322.c:2998 free sysinfo ARFCN=46 <0003> gsm322.c:3005 Unselect cell due to sync error! <0003> gsm322.c:498 Unselecting serving cell. <0003> gsm322.c:3072 Loss of CCCH, Trigger re-selection. <0003> gsm322.c:4035 (ms 1) Event 'EVENT_CELL_RESEL' for Cell selection in state 'C7 camped on any cell' <0003> gsm322.c:823 new state 'C7 camped on any cell' -> 'C8 any cell re-selection' <0003> gsm322.c:4334 Checking cell with ARFCN 33 for cell re-selection. (C2 = 42) <0003> gsm322.c:4334 Checking cell with ARFCN 86 for cell re-selection. (C2 = 0) <0003> gsm322.c:4345 Skip cell: not suitable and/or allowable. <0003> gsm322.c:4334 Checking cell with ARFCN 124 for cell re-selection. (C2 = 0) <0003> gsm322.c:4345 Skip cell: not suitable and/or allowable. <0003> gsm322.c:4334 Checking cell with ARFCN 48 for cell re-selection. (C2 = 0) <0003> gsm322.c:4345 Skip cell: not suitable and/or allowable. <0003> gsm322.c:4334 Checking cell with ARFCN 123 for cell re-selection. (C2 = 0) <0003> gsm322.c:4345 Skip cell: not suitable and/or allowable. <0003> gsm322.c:4334 Checking cell with ARFCN 34 for cell re-selection. (C2 = 0) <0003> gsm322.c:4345 Skip cell: not suitable and/or allowable. <0003> gsm322.c:4372 Best neighbour cell with ARFCN 33 selected. (normal priority) <0003> gsm322.c:4405 Scanning ARFCN 33 of neighbour cell during cell reselection. <0003> gsm322.c:469 Sync to ARFCN=33 rxlev=-68 (No sysinfo yet, ccch mode NONE) <0005> gsm48_mm.c:4329 (ms 1) Received 'MM_EVENT_LOST_COVERAGE' event in state MM IDLE, limited service <0005> gsm48_mm.c:1059 Selecting PLMN SEARCH state, because no cell selected. <0005> gsm48_mm.c:912 new MM IDLE state limited service -> PLMN search
Is it possible, that i miss an important part in my setup? To be honest, i followed quite strictly all the informations in the public wiki.
Stefan
Is it possible, that i miss an important part in my setup? To be honest, i followed quite strictly all the informations in the public wiki.
Post the L1 logs (from osmocon) ... because the log you post contain no low level information whatsoever (those happen on the phone and not on the pc software).
Cheers,
Sylvain
baseband-devel@lists.osmocom.org