btw Voice uplink works fine
On Thu, Oct 24, 2013 at 8:02 PM, Akib Sayyed <akibsayyed(a)gmail.com> wrote:
Hello folks
I am trying to implement AMR codec for osmocom-bb. I got assignment
commend which is same as
T_AMR_CONFIGURATION amr_param;
amr_param.noise_suppression_bit=0;
amr_param.initial_codec_mode_indicator=1;
amr_param.initial_codec_mode=0;
amr_param.active_codec_set=0x95;
amr_param.threshold[0]=0x0a;
amr_param.threshold[1]=0x10;
amr_param.threshold[2]=0x18;
amr_param.threshold[3]=0x24;------------just random value
amr_param.hysteresis[0]=0x04;
amr_param.hysteresis[1]=0x04;
amr_param.hysteresis[2]=0x04;
amr_param.hysteresis[3]=0x04;----------just copied value from rest
config for hysteresis
l1ddsp_load_amr_param( amr_param);
Now when i make a call I here gliches or random noise. also after some
time there is radio signal loss and call is dropped.
I am not getting why this is happening.
--
Akib Sayyed
Matrix-Shell
akibsayyed(a)gmail.com
akibsayyed(a)matrixshell.com
Mob:- +91-966-514-2243
--
Akib Sayyed
Matrix-Shell
akibsayyed(a)gmail.com
akibsayyed(a)matrixshell.com
Mob:- +91-966-514-2243