Dear all, when we initially crated OsmocomBB, we moved the code that it shared with the pre-existing OpenBSC project into libosmocore.git, where libosmocore and libosmogsm are built. As libosmocore was quite a bit in flux (and we didn't have jenkins+gerrit yet), we decided to have a local clone of libosmocore.git as a git-subtree module inside osmocom-bb.git Meanwhile, upstream libosmocore received more and more code, and none of that was ever built with an 'arm-non-eabi' toolchain and --enable-embedded. I've been working quite a bit during the last week on making that embedded build work again. The idea is to be able to configure + build libosmocore.git master using something like ./configure --prefix=/usr/local/arm-none-eabi \ --host=arm-none-eabi \ --enable-embedded \ --disable-shared \ CFLAGS="-Os -ffunction-sections -fdata-sections -nostartfiles -nodefaultlibs" and then install it onto the host pc. I've used /usr/local/arm-none-eabi as the prefix, but it could of course be anywhere. The above already works for me on Debian unstable using libosmocore.git master. I have some patches pending in laforge/sercomm and laforge/pseudotalloc, but those are not mandatory to make the build work The local clone of libosmocore in OsmocomBB src/shared/libosmocore will be removed, and the Makefiles of osmocom-bb instructed to use the system-installed libosmocore from /usr/local/arm-none-eabi (see my 'laforge/remove-libosmocore' branch in). This also already "works" on my Debian unstable system, in as far as there are no unresolved symbols or other compilation/linking issues, and the firmware images are generated. I have not tested any of the resulting binaries yet, and as I'm travelling without compatible hardware (and overloaded), it's unlikely that I'll be able to test it soon. Nevertheless, this is what I would like to move to. If anyone wants to try if he can build the embedded libosmocore and resulting osmocom-bb from laforge/remove-libosmocore branch, please do so and report your progress/success/issues here. Next steps (after validating the above) are: * remove old sercomm.c code from osmocom-bb and use the new code from libosmocore * remove 'talloc emulation' from osmocom-bb and use pseudotalloc from libosmocore.git (plus an embedded 'malloc' like umm_malloc) Further ideas: * create Debian/Ubuntu package of cross-compiled libosmocore for embedded-arm, which we can add to the Osmocom nightly builds apt repository. * have an (optional?) osmocom-bb makefile step to git clone + configure + make install libosmocore Anyone interested in helping out with this, please feel free to join in. Regards, Harald -- - Harald Welte <laforge(a)gnumonks.org> http://laforge.gnumonks.org/ ============================================================================ "Privacy in residential applications is a desirable marketing option." (ETSI EN 300 175-7 Ch. A6)