Hi,

Since a lot of people are asking the same questions and there seems to be a rush on the C123 on ebay I tought some clarification is needed.

Short version: - The exact tools I used on stage are _not_ and will _not_ be released (or sold ... several people asked ...) - Any one willing to re-code them without any apriori knowledge of GSM would most likely need months to read/understand both the specifications and the way the code works. (That's thousands of page of GSM spec and thousands of line of code) - Osmocom-BB project is not designed to be a sniffer, it's a baseband implementation, I just used part of it as a base.

So basically, unless you are really interested in GSM and are willing to dedicate time to understand it deeply and to contribute the various projects, there is not much point in you buying phones, or hanging out in the ml/irc or whatever ...

For those who are still reading and interested here's a little more detail:

* The HLR query step: -> Go watch the awesome 25C3 talk about it

* The TMSI recovering step - Won't be published - If you know how paging works, you know what to do anyway and it's trivial. Method is in the talk, there is nothing to it.

* The targeted sniffing application - Won't be published either - Some improvements to the layer23 app frame work will be done but these are generic framework stuff, not app-specific - Again, if you know how L2 works and have looked at several traces, it's obvious what to do. - The 'DSP' part of the sniffer is public for a while with a small demo app (single phone and doesn't exploit the full potential of the DSP patch) and it's perfectly sufficient to debug things on your o wn controlled network. (This is basically what I showed at Deepsec 2010).

* The tool to generate the input to Kraken - Won't be published either - Making the guesses is easy for anyone that knows what he's doing.

* The improved Kraken - No idea about it, see with Karsten / Sacha / Frank, I only got access to it 1 hour or so before the talk :)

* Conversion from burst to audio - This was a hacked software mostly with airprobe code. - The exact app will not be released but I'd like to see the capability put in some clean library we can re-use from airprobe and other application without having to multiply the code each time. - ... But since I'd like it to support AMR and viterbi softoutput before that happens, it could take some time. - Anyone familiar with GSM, airprobe and C could re-hack the same thing in an hour ...

As you can see, everything you need to analyze your own network / your own traffic, even at the burst level is already published and has been for more than a month. The other tools have been written only so that we could demonstrate that what we _say_ is possible for about year, we can now do it _practically_. It's apparently needed to get people attentions, "theoretical" attacks are not enough to get the operators / gsma to react. We'll see if that did it ...

A few advices that are always good:

- Make sure to checkout the a5/1 project ML and airprobe project ML and try to ask your questions in the proper mailing list as much as possible. - Check the wiki and mailing list archives toroughly before asking questions.

Cheers,

Sylvain Munaut

PS: I only posted on this list because it seems a lot of people were pointed here while in fact airprobe would probably be more appropriate to discuss attack scenarios and such, so make sure to answer / start new discussion on the right list.