On Fri, Dec 9, 2011 at 6:06 AM, Sreeraj R rsreeraj@gmail.com wrote:

Hi all,

I am just a beginner and is using the following hardware

Phone : C117 Serial Adapter : CP2102 based

The propt message that I am getting is different compared to that mentioned in the wiki (http://bb.osmocom.org/trac/wiki/CompalRamloader).

Command: ./osmocon -d t -p /dev/ttyUSB0 -m c123 ../../target/firmware/board/compal_e88/loader.compalram.bin

Gives me the following data

{00,f1,01,72,82,bf,7d,fd,7f,00,a6,51,d2,51,0a,3a,02,4d,a3,a3,da,00,00}

Entire log after short power button key press is http://pastebin.com/AqcNm6dq.

Can anyone give some pointers, or did I go wrong somewhere. The wiki specifies C117 board is similar to C123.

regards Sreeraj R

Hi Sreeraj, I suggest you try ./osmocon -d t -p /dev/ttyUSB0 -m c123xor ../../target/firmware/board/compal_e88/loader.compalram.bin

Best regards Kugg