thank you for helping me, kevin.
tobsen
2011/1/29 ml@mail.tsaitgaist.info:
they're the right cables. ignore the pictures, only the name is important. these are some cheap websites, don't expect good quality content.
kevin
On 01/29/2011 03:34 AM, Tobias Funke wrote:
thanks to you,
i checked that:
there is no input in osmocon, when i rub the tip, so i think the cable is shit.
that was simple...
i buy a new one, are the akku-king cable and the gsmlibery cable really the right ones???
both pictures are showing not the t191 unlock cable...
good greetings tobsen
2011/1/28 ml@mail.tsaitgaist.info:
Hi,
first test if the cable is working. a fast but dirty way is to rub the tip with your fingers. this generates noise that should show some random input in osmocon. also but sure to not charge the phone while using osmocon, this can inhibit the ram loader.
good luck, kevin
On 01/28/2011 08:09 PM, tobsen wrote:
Hi,
sorry if I shouldn`t write correclly, i`m not that good in english.
i have a Motorola c118 and this usb/serial cable: http://www.gsmbase.de/shop/show_product.php?products_id=620 here
my problem: compiling was successfully.
than i run osmocon: ./osmocon -p /dev/ttyUSB0 -m c123xor /home/test/install/osmocom-bb/src/target/firmware/board/compal_e88/layer1.ramload.bin
i pressed power on the phone. nothing happend. again. nothing happend, no output, no upload/download to/from the phone...
what is my fault? can you help me?
i have tested it with: -m 123 ; -m 118xor ; -m 118 (the same thing) my system is ubuntu 10.10 (not in a virtual box or something else).
thanks a lot, tobsen