I've done some sam7A3 and sam7s256 development a few years ago, but normally you have tools for that. I was using a commercial one IAR, but there are opensource alternatives, you can google for it.
Have you ever tried flashing sam7S64 microntroller? Cause you don't really need to figure out how flash work, you just need the right tool which loads the firmware into the uC.
On 12-12-2010 23:52, Simon Barnett wrote:
Thanks for this, its much appreciated - it builds now.
I've got an AT91SAM7S64 board with an Olimex ARM-USB-OCD JTAG debugger, however, I'm having trouble figuring out how to flash the board with your firmware. I've done quite a bit of research looking into how to flash the device, but haven't found anything yet that I can get to work.
How do you suggest that I flash the firmware?
Thanks for your help,
Simon
On 9 December 2010 16:02, Harald Weltelaforge@gnumonks.org wrote:
On Thu, Dec 09, 2010 at 12:27:25PM +0000, Simon Barnett wrote:
I'm trying to build the Osmocom SIMtrace firmware, but so far I'm not having much luck
As indicted in private mail: There was one file missing from the git tree, it has been fixed.
--
- Harald Weltelaforge@gnumonks.org http://laforge.gnumonks.org/
============================================================================ "Privacy in residential applications is a desirable marketing option." (ETSI EN 300 175-7 Ch. A6)