8 Feb
2011
8 Feb
'11
11:51 p.m.
Hi,
I have problem with ./mobile application.
When I run this application I have only information that sending APDU
(class 0xa0, ins 0xa4).
Some more information:
1. At first I started layer1 firmware n motorola C115
./osmocon -p /dev/ttyS0 -m c123xor
/root/osmocom-bb/src/target/firmware/board/compal_e88/layer1.compalram.bin
2. Second I execute ./mobile
./mobile -i 224.0.0.0
3. I pressed power button on my phone.
After this I received only this following information:
<000e> sim.c:1206 init SIM client
<0005> gsm48_cc.c:61 init Call Control
<0001> gsm48_rr.c:4944 init Radio Ressource process
<0004> gsm48_mm.c:1220 init Mobility Management process
<0004> gsm48_mm.c:971 Selecting PLMN SEARCH state, because no SIM.
<0002> gsm322.c:3471 init PLMN process
<0003> gsm322.c:3472 init Cell Selection process
<0003> gsm322.c:3522 Read stored BA list (mcc=260 mnc=02 Poland, Era)
<0003> gsm322.c:3522 Read stored BA list (mcc=260 mnc=01 Poland, Plus)
<0003> gsm322.c:3522 Read stored BA list (mcc=260 mnc=06 Poland, Play)
<0003> gsm322.c:3522 Read stored BA list (mcc=260 mnc=03 Poland, Orange)
Mobile '1' initialized, please start phone now!
VTY available on port 4247.
<0004> subscriber.c:556 Requesting SIM file 0x2fe2
<000e> sim.c:209 got new job: SIM_JOB_READ_BINARY (handle=00000004)
<000e> sim.c:697 go MF
<000e> sim.c:241 SELECT (file=0x3f00)
<000e> sim.c:187 sending APDU (class 0xa0, ins 0xa4)
I am waiting, waiting, waiting but unfortunately without progress...
Bellow my osmocom.cfg file:
!
! OsmocomBB () configuration saved from vty
!!
!
line vty
no login
!
gps device /dev/ttyACM0
gps baudrate default
no gps enable
!
ms 1
layer2-socket /tmp/osmocom_l2
sap-socket /tmp/osmocom_sap
sim reader
network-selection-mode auto
imei 000000000000000 0
imei-fixed
no emergency-imsi
no call-waiting
no auto-answer
no clip
no clir
tx-power auto
no simulated-delay
no stick
location-updating
codec full-speed prefer
codec half-speed
no abbrev
support
sms
a5/1
a5/2
p-gsm
e-gsm
r-gsm
dcs
class-900 4
class-dcs 1
channel-capability sdcch+tchf+tchh
full-speech-v1
full-speech-v2
half-speech-v1
min-rxlev -106
dsc-max 90
exit
test-sim
imsi 001010000000000
ki xor 00 00 00 00 00 00 00 00 00 00 00 00
no barred-access
no rplmn
hplmn-search foreign-country
exit
no shutdown
exit
!
Unfortunately I have no idea how to resolve this problem so please help me...
br,
Grzegusz