I have a problem when load the firmware

Hi, all. I am a newer to the osmocomBB project. And i was trying to load the firmware to my C118 phone using CP210X converter. But after i input the command below: /.*/osmocon -p /dev/ttyUSB0 -m c123xor ../../target/firmware/board/PHONE_TYPE/FIRMWARE.compalram.bin*/ i can only get some reponse shown in the terminal like this: got 1 bytes from modem, data looks like: 40 @ got 1 bytes from modem, data looks like: f8 . got 1 bytes from modem, data looks like: 00 . got 1 bytes from modem, data looks like: e0 . got 1 bytes from modem, data looks like: 00 . got 1 bytes from modem, data looks like: 20 got 1 bytes from modem, data looks like: 00 . It was pretty different from the instruction in the osmocomBB website as i did not get the below messages: Received PROMPT1 from phone, responding with CMD read_file(../../target/firmware/board/compal_e88/loader.compalram.bin): file_size=13404, hdr_len=4, dnload_len=13411 so, i was confused if i have something wrong? can anyone help me with this? -- View this message in context: http://baseband-devel.722152.n3.nabble.com/I-have-a-problem-when-load-the-f… Sent from the baseband-devel mailing list archive at Nabble.com.