Re: Pirelli DPL10 - nuttx and dump flash for restore later

Hi Craig,

Yes, creating a new board config to pirelli_dp10 is the right thing to do.

Patches are welcome!

Best Regards,

Alan

On 5/2/13, Craig Comstock craig_comstock@yahoo.com wrote:

I did get this working on the DPL10 by enabling IRDA console.

I did it two ways: copying nuttx/configs/compal_e88 to nuttx/configs/pirelli_dpl10 and editing nsh_highram/defconfig and after reading more carefully just using compal_e88 and editing nuttx/.config

CONFIG_SERIAL_IRDA_CONSOLE=y

maybe I could submit a patch that made a new directory for pirelli_dpl10 that matches compal_e88 but has IRDA console enabled?

now on to other things... like layer 1/2, graphics... -Craig

---

From: Alan Carvalho de Assis acassis@gmail.com

To: Craig Comstock craig_comstock@yahoo.com Cc: "baseband-devel@lists.osmocom.org" baseband-devel@lists.osmocom.org Sent: Friday, April 5, 2013 12:24 PM Subject: Re: Pirelli DPL10 - nuttx and dump flash for restore later

Hi Craig,

On 4/5/13, Craig Comstock craig_comstock@yahoo.com wrote:

...

I was wondering if someone could give me a nudge on how to get started getting nuttx working on this phone?

I never tested it on Pirelli phone, but since it is same baseband as GTA phones, you just need to use:

$ cd nuttx/tools $ ./configure.sh compal_e88/nsh_highram $ cd .. $ make

Then upload nuttx.bin using chainload.compalram.bin as explained here:

http://bb.osmocom.org/trac/wiki/nuttx-bb/configurations

Keep in mind the main development platform for nuttx-bb is C155 (compal_e99).

If you need help, please enter in IRC channel ##nuttx-bb (irc.freenode.net).

More info: http://bb.osmocom.org/trac/wiki/nuttx-bb

Best Regards,

Alan