Osmocom FMTool error

Please could you assist me with some pointers, Good work btw. I am using a C115 with the T191 prolific USB cable. I can talk to the phone but cannot load the Layer1 Stack. I get : ./osmocon -p /dev/ttyUSB0 -m c123 ../../target/firmware/board/compal_e88/layer1.compalram.bin got 1 bytes from modem, data looks like: 00 . got 1 bytes from modem, data looks like: 00 . got 1 bytes from modem, data looks like: 2f / got 1 bytes from modem, data looks like: 00 . got 3 bytes from modem, data looks like: 1b f6 02 ... got 1 bytes from modem, data looks like: 00 . got 1 bytes from modem, data looks like: 41 A got 1 bytes from modem, data looks like: 01 . got 1 bytes from modem, data looks like: 40 @ Received PROMPT1 from phone, responding with CMD read_file(../../target/firmware/board/compal_e88/layer1.compalram.bin): file_size=51272, hdr_len=4, dnload_len=51279 got 1 bytes from modem, data looks like: 66 f got 1 bytes from modem, data looks like: 74 t got 1 bytes from modem, data looks like: 6d m got 1 bytes from modem, data looks like: 74 t got 1 bytes from modem, data looks like: 6f o got 1 bytes from modem, data looks like: 6f o got 1 bytes from modem, data looks like: 6c l Received FTMTOOL from phone, ramloader has aborted got 1 bytes from modem, data looks like: 65 e got 1 bytes from modem, data looks like: 72 r got 1 bytes from modem, data looks like: 72 r got 1 bytes from modem, data looks like: 6f o got 1 bytes from modem, data looks like: 72 r got 1 bytes from modem, data looks like: 00 . got 1 bytes from modem, data looks like: 00 . I press the switch once and it just jumps and does the same again and again and again. I read that this maybe a timing issue. I have installed on 64 Bit and 32 bit ubunto on a fast machine and the result is the same. Also i do not see Layer23 command during compile. Please advise me i am happy to do the debugging but any pointers would help me as i am willing to learn from this great work that has been done by you and the team. Thanks Raz