baseband-devel

baseband-devel@lists.osmocom.org

2023 discussions

[PATCH libosmocore] timer_test: tweak path to config.h
by Alex Badea 06 Jan '13

06 Jan '13

When building out-of-srcdir, "../../config.h" fails to reach config.h because the compiler is invoked in $builddir/tests/, not $builddir/tests/timer/. Use "../config.h" instead; this also works for in-srcdir builds. Signed-off-by: Alex Badea <vamposdecampos(a)gmail.com> --- tests/timer/timer_test.c | 2 +- 1 files changed, 1 insertions(+), 1 deletions(-) diff --git a/tests/timer/timer_test.c b/tests/timer/timer_test.c index ba3127d..bb9a177 100644 --- a/tests/timer/timer_test.c +++ b/tests/timer/timer_test.c @@ -33,7 +33,7 @@ #include <osmocom/core/select.h> #include <osmocom/core/linuxlist.h> -#include "../../config.h" +#include "../config.h" static void main_timer_fired(void *data); static void secondary_timer_fired(void *data); -- 1.7.0.4

2 1

libosmocore: [PATCH] Replace obsolete automake AM_CONFIG_HEADER.
by Christian Vogel 06 Jan '13

06 Jan '13

Hi, I just setup a machine running ArchLinux which has a pretty recent automake/autoconf. libosmocore fails to build. Attached (trivial) patch fixes that. Someone with a really old toolchain/automake should check if it breaks setups we consider supported. Chris

2 1

[PATCH] Replace obsolete automake AM_CONFIG_HEADER.
by Christian Vogel 05 Jan '13

05 Jan '13

This fixes the following complaint by autoconf 2.69-1, automake 1.13.1-1. : configure.ac:80: error: 'AM_CONFIG_HEADER': this macro is obsolete. : You should use the 'AC_CONFIG_HEADERS' macro instead. : /usr/share/aclocal-1.13/obsolete-err.m4:12: AM_CONFIG_HEADER is expan : configure.ac:80: the top level Automake 1:1.11.3-1ubuntu2, autoconf 2.68-1ubuntu2 don't even emit a warning without, and work just fine with this patch. Signed-off-by: Christian Vogel <vogelchr(a)vogel.cx> --- configure.ac | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/configure.ac b/configure.ac index 24ddd0c..fbc83f3 100644 --- a/configure.ac +++ b/configure.ac @@ -77,7 +77,7 @@ AC_DEFUN([CHECK_TM_INCLUDES_TM_GMTOFF], [ CHECK_TM_INCLUDES_TM_GMTOFF dnl Generate the output -AM_CONFIG_HEADER(config.h) +AC_CONFIG_HEADER(config.h) AC_ARG_ENABLE(talloc, [AS_HELP_STRING( -- 1.8.1 --VS++wcV0S1rZb1Fb--

1 0

[PATCH] layer23 cell_log: log CBCH cell info
by Alex Badea 05 Jan '13

05 Jan '13

If System Information contained CBCH channel description, tune to it and log SMSCB messages with a Geographical Scope of Cell Wide (Immediate) -- these are typically used for "Cell Info Display". The CBCH timeout is set to a generous 8 seconds; this is because we need 4 frames for reassembly, we usually miss the first, and we might hit a burst of Null SMSCB messages. By default this feature is disabled; it can be enabled via a new '-B' or '--cbch' commandline argument. Signed-off-by: Alex Badea <vamposdecampos(a)gmail.com> --- This patch requires the CBCH DM flag patch[1], and the libosmocore patch series[2] for SMSCB reassembly. [1] http://lists.osmocom.org/pipermail/baseband-devel/2013-January/003612.html [2] http://lists.osmocom.org/pipermail/baseband-devel/2013-January/003642.html src/host/layer23/src/misc/app_cell_log.c | 11 +++- src/host/layer23/src/misc/cell_log.c | 114 +++++++++++++++++++++++++++++- 2 files changed, 121 insertions(+), 4 deletions(-) diff --git a/src/host/layer23/src/misc/app_cell_log.c b/src/host/layer23/src/misc/app_cell_log.c index a7f42c3..5ed1d6b 100644 --- a/src/host/layer23/src/misc/app_cell_log.c +++ b/src/host/layer23/src/misc/app_cell_log.c @@ -45,6 +45,7 @@ extern uint16_t (*band_range)[][2]; char *logname = "/var/log/osmocom.log"; int RACH_MAX = 2; +int do_cbch = 0; int _scan_work(struct osmocom_ms *ms) { @@ -103,7 +104,8 @@ static int l23_getopt_options(struct option **options) #endif {"gps", 1, 0, 'g'}, {"baud", 1, 0, 'b'}, - {"arfcns", 1, 0, 'A'} + {"arfcns", 1, 0, 'A'}, + {"cbch", 1, 0, 'B'}, }; *options = opts; @@ -162,6 +164,8 @@ static int l23_cfg_print_help() printf(" -f --gps DEVICE /dev/ttyACM0. GPS serial device.\n"); printf(" -b --baud BAUDRAT The baud rate of the GPS device\n"); printf(" -A --arfcns ARFCNS The list of arfcns to be monitored\n"); + printf(" -B --cbch Scan and log info from the CBCH\n"); + return 0; } @@ -224,6 +228,9 @@ static int l23_cfg_handle(int c, const char *optarg) parse_band_range((char*)optarg); printf("New frequencies range: %s\n", print_band_range(*band_range, buf, sizeof(buf))); break; + case 'B': + do_cbch = 1; + break; } return 0; @@ -234,7 +241,7 @@ cmd_line_error: static struct l23_app_info info = { .copyright = "Copyright (C) 2010 Andreas Eversberg\n", - .getopt_string = "g:p:l:r:nf:b:A:", + .getopt_string = "g:p:l:r:nf:b:A:B", .cfg_supported = l23_cfg_supported, .cfg_getopt_opt = l23_getopt_options, .cfg_handle_opt = l23_cfg_handle, diff --git a/src/host/layer23/src/misc/cell_log.c b/src/host/layer23/src/misc/cell_log.c index 7340dcb..41a34fd 100644 --- a/src/host/layer23/src/misc/cell_log.c +++ b/src/host/layer23/src/misc/cell_log.c @@ -26,6 +26,8 @@ #include <stdlib.h> #include <time.h> #include <errno.h> +#include <ctype.h> +#include <arpa/inet.h> #include <l1ctl_proto.h> @@ -35,6 +37,7 @@ #include <osmocom/core/msgb.h> #include <osmocom/gsm/gsm_utils.h> #include <osmocom/gsm/protocol/gsm_04_08.h> +#include <osmocom/gsm/protocol/gsm_03_41.h> #include <osmocom/gsm/rsl.h> #include <osmocom/bb/common/l1ctl.h> @@ -47,6 +50,7 @@ #define READ_WAIT 2, 0 #define RACH_WAIT 0, 900000 +#define CBCH_WAIT 8, 0 #define MIN_RXLEV_DBM -106 #define MAX_DIST 2000 @@ -55,6 +59,7 @@ enum { SCAN_STATE_SYNC, SCAN_STATE_READ, SCAN_STATE_RACH, + SCAN_STATE_CBCH, }; /* ranges of bands */ @@ -89,6 +94,7 @@ static int rach_count; static FILE *logfp = NULL; extern char *logname; extern int RACH_MAX; +extern int do_cbch; static struct gsm48_sysinfo sysinfo; @@ -115,6 +121,7 @@ struct rach_ref { static void start_sync(void); static void start_rach(void); +static void start_cbch(void); static void start_pm(void); static void log_gps(void) @@ -228,6 +235,11 @@ static void timeout_cb(void *arg) rach_count++; start_rach(); break; + case SCAN_STATE_CBCH: + LOGP(DRR, LOGL_INFO, "Timeout on CBCH\n"); + l1ctl_tx_dm_rel_req(ms); + start_sync(); + break; } } @@ -245,6 +257,35 @@ static void start_timer(int sec, int micro) osmo_timer_schedule(&timer, sec, micro); } +static void start_cbch(void) +{ + struct gsm48_sysinfo *s = &sysinfo; + int res; + + if (!do_cbch) { + res = -1; + } else if (!s->chan_nr) { + LOGP(DRR, LOGL_DEBUG, "No CBCH description in sysinfo\n"); + res = -1; + } else if (s->h) { + res = l1ctl_tx_dm_est_req_h1(ms, + s->maio, s->hsn, s->hopping, s->hopp_len, + s->chan_nr, s->tsc, + GSM48_CMODE_SIGN, 0, L1CTL_DM_F_CBCH); + } else { + res = l1ctl_tx_dm_est_req_h0(ms, s->arfcn, s->chan_nr, s->tsc, + GSM48_CMODE_SIGN, 0, L1CTL_DM_F_CBCH); + } + + if (res < 0) { + start_sync(); + return; + } + + state = SCAN_STATE_CBCH; + start_timer(CBCH_WAIT); +} + static void start_rach(void) { struct gsm48_sysinfo *s = &sysinfo; @@ -254,7 +295,7 @@ static void start_rach(void) if (rach_count == RACH_MAX) { log_sysinfo(); - start_sync(); + start_cbch(); return; } @@ -433,7 +474,7 @@ static int ta_result(uint8_t ta) } log_sysinfo(); - start_sync(); + start_cbch(); return 0; } @@ -737,6 +778,70 @@ int chan_conf(struct osmocom_ms *ms, struct msgb *msg) return 0; } +static int sms_bc_cmd(struct osmocom_ms *ms, struct msgb *msg) +{ + struct abis_rsl_cchan_hdr *ch = msgb_l2(msg); + struct tlv_parsed tv; + struct rsl_ie_cb_cmd_type *cmd_type; + struct gsm341_ms_message *cbmsg; + unsigned int cbmsglen; + char buf[256], *p; + + DEBUGP(DRSL, "RSLms SMS BC CMD chan_nr=0x%02x\n", + ch->chan_nr); + + rsl_tlv_parse(&tv, ch->data, msgb_l2len(msg) - sizeof(*ch)); + if (!TLVP_PRESENT(&tv, RSL_IE_SMSCB_MSG) || + !TLVP_PRESENT(&tv, RSL_IE_CB_CMD_TYPE)) { + LOGP(DRR, LOGL_ERROR, "SMS_BC_CMD missing mandatory IEs\n"); + return -EINVAL; + } + + cmd_type = (struct rsl_ie_cb_cmd_type *) TLVP_VAL(&tv, RSL_IE_CB_CMD_TYPE); + cbmsg = (struct gsm341_ms_message *) TLVP_VAL(&tv, RSL_IE_SMSCB_MSG); + cbmsglen = TLVP_LEN(&tv, RSL_IE_SMSCB_MSG); + if (cbmsglen < sizeof(*cbmsg)) { + LOGP(DRR, LOGL_ERROR, "RSL_IE_SMSCB_MSG too short\n"); + return -EINVAL; + } + + if (cmd_type->command != RSL_CB_CMD_TYPE_NORMAL) + return 0; + + gsm_7bit_decode(buf, cbmsg->data, cbmsglen - sizeof(*cbmsg)); + for (p = buf; *p; p++) + if (!isprint(*p)) + *p = '_'; + + LOGP(DSUM, LOGL_INFO, "Cell info: gs=%d code=%d update=%d id=%d text=\"%s\"\n", + cbmsg->serial.gs, + GSM341_MSG_CODE(cbmsg), + cbmsg->serial.update, + ntohs(cbmsg->msg_id), + buf); + + if (cbmsg->serial.gs != GSM341_GS_CELL_WIDE_IMMED) + return 0; + + LOGFILE("[cbch]\n"); + LOGFILE("arfcn %d\n", sysinfo.arfcn); + LOGFILE("gs %d code %d update %d msg_id %d page %d numpages %d\n", + cbmsg->serial.gs, + GSM341_MSG_CODE(cbmsg), + cbmsg->serial.update, + ntohs(cbmsg->msg_id), + cbmsg->page.current, cbmsg->page.total); + LOGFILE("text \"%s\"\n", buf); + LOGFILE("\n"); + LOGFLUSH(); + + l1ctl_tx_dm_rel_req(ms); + stop_timer(); + + start_sync(); + return 0; +} + static int rcv_cch(struct osmocom_ms *ms, struct msgb *msg) { struct abis_rsl_cchan_hdr *ch = msgb_l2(msg); @@ -751,6 +856,11 @@ static int rcv_cch(struct osmocom_ms *ms, struct msgb *msg) msgb_free(msg); return rc; } + if (state == SCAN_STATE_CBCH && msg_type == RSL_MT_SMS_BC_CMD) { + rc = sms_bc_cmd(ms, msg); + msgb_free(msg); + return rc; + } LOGP(DRSL, LOGL_NOTICE, "RSLms message unhandled\n"); msgb_free(msg); -- 1.7.0.4

1 0

[PATCH] core/msgb: Change return value of msgb_pull to the start of pulled header
by Sylvain Munaut 05 Jan '13

05 Jan '13

From: Sylvain Munaut <tnt(a)246tNt.com> Currently msgb_pull returns a pointer to the new start of msgb, which is pretty counter intuitive and when using msgb_pull is often annoying. For eg, the msgb_pull_u{8,16,32} were previously "fixed" for this quirk in a previous commit. The msgb_pull_l2h in lapdm is also wrong because of this, same for code in osmocom-bb loader. AFAICT, the current users of msgb_pull either don't care about the return value, or expect it to be a pointer to the pulled header and not the new start of msgb (and so are currently buggy). Without this patch, you have things like: struct foo *bar = msgb_pull(msg, sizeof(struct foo)) - sizeof(struct foo) With the patch, you have: struct foo *bar = msgb_pull(msg, sizeof(struct foo)); which is IMHO a much better style. Signed-off-by: Sylvain Munaut <tnt(a)246tNt.com> --- include/osmocom/core/msgb.h | 14 ++++++++------ 1 files changed, 8 insertions(+), 6 deletions(-) diff --git a/include/osmocom/core/msgb.h b/include/osmocom/core/msgb.h index a1939ab..4a72f2d 100644 --- a/include/osmocom/core/msgb.h +++ b/include/osmocom/core/msgb.h @@ -287,16 +287,18 @@ static inline unsigned char *msgb_push(struct msgb *msgb, unsigned int len) /*! \brief remove (pull) a header from the front of the message buffer * \param[in] msgb message buffer * \param[in] len number of octets to be pulled - * \returns pointer to new start of msgb + * \returns pointer to header that's been pulled (i.e. previous start of msgb) * * This function moves the \a data pointer of the \ref msgb further back * in the message, thereby shrinking the size of the message by \a len * bytes. */ static inline unsigned char *msgb_pull(struct msgb *msgb, unsigned int len) -{ +{ + unsigned char *tmp = msgb->data; msgb->len -= len; - return msgb->data += len; + msgb->data += len; + return tmp; } /*! \brief remove uint8 from front of message @@ -305,7 +307,7 @@ static inline unsigned char *msgb_pull(struct msgb *msgb, unsigned int len) */ static inline uint8_t msgb_pull_u8(struct msgb *msgb) { - uint8_t *space = msgb_pull(msgb, 1) - 1; + uint8_t *space = msgb_pull(msgb, 1); return space[0]; } /*! \brief remove uint16 from front of message @@ -314,7 +316,7 @@ static inline uint8_t msgb_pull_u8(struct msgb *msgb) */ static inline uint16_t msgb_pull_u16(struct msgb *msgb) { - uint8_t *space = msgb_pull(msgb, 2) - 2; + uint8_t *space = msgb_pull(msgb, 2); return space[0] << 8 | space[1]; } /*! \brief remove uint32 from front of message @@ -323,7 +325,7 @@ static inline uint16_t msgb_pull_u16(struct msgb *msgb) */ static inline uint32_t msgb_pull_u32(struct msgb *msgb) { - uint8_t *space = msgb_pull(msgb, 4) - 4; + uint8_t *space = msgb_pull(msgb, 4); return space[0] << 24 | space[1] << 16 | space[2] << 8 | space[3]; } -- 1.7.8.6

1 0

fix of osmoload, flashing c155 works
by jolly 05 Jan '13

05 Jan '13

hi, just fixed the issue from 29c3, where flashing of phones did not work anymore. if no one complains, i will apply it. it is also possible to flash c155 phones. the original compal boot loader will start firmware at 0x20000 instead of 0x2000 (c123), so i modified the linker scripts for compal_e99. i am not sure, if all c155 phones behave the same. to check this, i dumped some pages of the flash memory: run the loader: $ host/osmocon/osmocon -p /dev/ttyUSB0 -m c155 target/firmware/board/compal_e99/loader.compalram.bin start the phone and dump some flash: $ host/osmocon/osmoload memdump 0x000000 0x30000 dump a hexdump of that dump showed me where the actual firmware starts: ... 0000800 4f42 544f 392e 2e30 3530 0000 0000 0000 0000810 3031 3330 0101 0000 ffff ffff ffff ffff 0000820 ffff ffff ffff ffff ffff ffff ffff ffff * 0020000 4f43 4544 392e 2e30 3130 0000 0000 0000 0020010 4c46 5845 392e 2e30 3130 302e 0031 0000 0020020 5352 4b50 392e 2e30 3130 302e 0031 0000 ... i would like to know, if this is true for other c155 phones. regards, andreas

3 6

No r-gsm cell shown in mobile app
by Karsten Krummeich 05 Jan '13

05 Jan '13

Hi, I'm thinking about why the mobile app don't show me the German GSM-R (MCC: 262, MNC: 10) cells they are around me. The rssi app shows me the cells (e. g. ARFCN: 957 and 961). I'm using the sylvain/testing branch and I am searching for more details in the source code and found in settings.c that the r gsm band are enabled and in the freq_list. Can someone tell me another point for searching in source? Thanks in advance. Best regards. kasio

3 4

[PATCH] Generate Compal E99 binaries for loader and flash locations
by Andreas Eversberg 05 Jan '13

05 Jan '13

Loader binaries start at 0x20000 at flash memory. This is where the Compal loader jumps to. Flash binaries start at 0x30000 at flash memory. --- src/target/firmware/Makefile | 12 +- src/target/firmware/board/compal_e99/flash.lds | 134 +++++++++++++++++++++ src/target/firmware/board/compal_e99/loader.lds | 147 +++++++++++++++++++++++ 3 files changed, 288 insertions(+), 5 deletions(-) create mode 100644 src/target/firmware/board/compal_e99/flash.lds create mode 100644 src/target/firmware/board/compal_e99/loader.lds diff --git a/src/target/firmware/Makefile b/src/target/firmware/Makefile index a71eef6..c76bcd0 100644 --- a/src/target/firmware/Makefile +++ b/src/target/firmware/Makefile @@ -66,11 +66,13 @@ compal_e86_ENVIRONMENTS=$(compal_COMMON_ENVIRONMENTS) # Compal E99 compal_e99_OBJS=$(compal_COMMON_OBJS) board/compal_e99/init.o battery/dummy.o $(FB_e99_OBJS) -compal_e99_ENVIRONMENTS=$(compal_COMMON_ENVIRONMENTS) +compal_e99_ENVIRONMENTS=$(compal_COMMON_ENVIRONMENTS) e99loader e99flash e99loader_LDS=board/compal_e99/loader.lds -e99loader_OBJS=board/compal/header.o +e99loader_OBJS=board/compal/start.rom.o board/compal/header.o board/compal/exceptions_redirect.o + e99flash_LDS=board/compal_e99/flash.lds +e99flash_OBJS=board/compal/start.rom.o board/compal/header.o board/compal/exceptions_redirected.o board/compal/handlers.o # Sony Ericsson J100 (made by Compal) @@ -99,10 +101,10 @@ ANY_APP_LIBS+=calypso/libcalypso.a layer1/liblayer1.a lib/libmini.a comm/libcomm -include Makefile.inc # Uncomment this line if you want to enable Tx (Transmit) Support. -#CFLAGS += -DCONFIG_TX_ENABLE +CFLAGS += -DCONFIG_TX_ENABLE # Uncomment this line if you want to write to flash. -#CFLAGS += -DCONFIG_FLASH_WRITE +CFLAGS += -DCONFIG_FLASH_WRITE # Uncomment this line if you want to write to flash, including the bootloader. -#CFLAGS += -DCONFIG_FLASH_WRITE_LOADER +CFLAGS += -DCONFIG_FLASH_WRITE_LOADER diff --git a/src/target/firmware/board/compal_e99/flash.lds b/src/target/firmware/board/compal_e99/flash.lds new file mode 100644 index 0000000..1cf189f --- /dev/null +++ b/src/target/firmware/board/compal_e99/flash.lds @@ -0,0 +1,134 @@ +/* + * Linker script for flashed applications on the Compal E99 + * + * This script creates a binary that can be linked at 0xFFFF, starting + * with the second flash page. This is what a phone application or + * pure layer1 device uses. + * + * XXX: interrupts? + * + */ +OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm") +OUTPUT_ARCH(arm) +ENTRY(_start) +MEMORY +{ + LOADR (rx) : ORIGIN = 0x00000000, LENGTH = 0x30000 + /* 2 MBytes of external flash memory (minus loader) */ + FLASH (rx) : ORIGIN = 0x00030000, LENGTH = 0x1F0000 + /* 256 kBytes of internal zero-waitstate sram */ + IRAM (rw) : ORIGIN = 0x00800000, LENGTH = 0x040000 + /* 256 kBytes of external slow sram */ + ERAM (rw) : ORIGIN = 0x01000000, LENGTH = 0x040000 +} +SECTIONS +{ + /* entrypoint */ + .text.start : { + PROVIDE(_start = .); + KEEP(*(.text.start)) + *(.text.start) + } > FLASH + + /* exception vectors from 0x80001c to 0x800034 */ + .text.exceptions 0x80001c : { + KEEP(*(.text.exceptions)) + * (.text.exceptions) + . = ALIGN(4); + } > IRAM AT> FLASH + PROVIDE(_exceptions = LOADADDR(.text.exceptions)); + + /* code */ + .text : { + /* regular code */ + *(.text*) + /* gcc voodoo */ + *(.glue_7t) *(.glue_7) *(.vfp11_veneer) *(.v4_bx) + } > FLASH + PROVIDE(_text_start = ADDR(.text)); + PROVIDE(_text_end = ADDR(.text) + SIZEOF(.text)); + + /* constructor pointers */ + .ctors : { + /* ctor count */ + LONG(SIZEOF(.ctors) / 4 - 2) + /* ctor pointers */ + KEEP(*(SORT(.ctors))) + /* end of list */ + LONG(0) + } > FLASH + PROVIDE(_ctor_start = LOADADDR(.ctors)); + PROVIDE(_ctor_end = LOADADDR(.ctors) + SIZEOF(.ctors)); + + /* destructor pointers */ + .dtors : { + /* dtor count */ + LONG(SIZEOF(.dtors) / 4 - 2) + /* dtor pointers */ + KEEP(*(SORT(.dtors))) + /* end of list */ + LONG(0) + } > FLASH + PROVIDE(_dtor_start = LOADADDR(.dtors)); + PROVIDE(_dtor_end = LOADADDR(.dtors) + SIZEOF(.dtors)); + + /* read-only data */ + .rodata : { + *(.rodata*) + } > FLASH + PROVIDE(_rodata_start = ADDR(.rodata)); + PROVIDE(_rodata_end = ADDR(.rodata) + SIZEOF(.rodata)); + + /* pic offset tables */ + .got : { + . = ALIGN(4); + *(.got) + *(.got.plt) *(.igot.plt) *(.got) *(.igot) + . = ALIGN(4); + } > FLASH + PROVIDE(_got_start = ADDR(.got)); + PROVIDE(_got_end = ADDR(.got) + SIZEOF(.got)); + + /* reserved ram */ + .compal.reservedram 0x800000 (NOLOAD) : { + . = 0xff; + } > IRAM + + /* initialized data */ + .data : AT (LOADADDR(.got) + SIZEOF(.got)) { + . = ALIGN(4); + *(.data) + . = ALIGN(4); + } > IRAM + PROVIDE(__data_start = LOADADDR(.data)); + PROVIDE(__data_end = LOADADDR(.data) + SIZEOF(.data)); + PROVIDE(_data_start = ADDR(.data)); + PROVIDE(_data_end = ADDR(.data) + SIZEOF(.data)); + + /* ram code */ + .ramtext : AT (LOADADDR(.data) + SIZEOF(.data)) { + . = ALIGN(4); + *(.ramtext) + . = ALIGN(4); + } > IRAM + PROVIDE(__ramtext_start = LOADADDR(.ramtext)); + PROVIDE(__ramtext_end = LOADADDR(.ramtext) + SIZEOF(.ramtext)); + PROVIDE(_ramtext_start = ADDR(.ramtext)); + PROVIDE(_ramtext_end = ADDR(.ramtext) + SIZEOF(.ramtext)); + + /* uninitialized data */ + .bss (NOLOAD) : { + . = ALIGN(4); + *(.bss) + . = ALIGN(4); + } > IRAM + PROVIDE(__bss_start = ADDR(.bss)); + PROVIDE(__bss_end = ADDR(.bss) + SIZEOF(.bss)); + PROVIDE(_bss_start = __bss_start); + PROVIDE(_bss_end = __bss_end); + + /* end of image */ + . = ALIGN(4); + _end = .; + PROVIDE(end = .); +} diff --git a/src/target/firmware/board/compal_e99/loader.lds b/src/target/firmware/board/compal_e99/loader.lds new file mode 100644 index 0000000..bb117a8 --- /dev/null +++ b/src/target/firmware/board/compal_e99/loader.lds @@ -0,0 +1,147 @@ +/* + * Linker script for flashed loader on the Compal E99 + * + * This script creates a binary that can replace a standard firmware + * located at 0x20000. It works in conjunction with the compal ramloader. + * + * The interrupt vectors and start address are at known, fixed offsets. + * + */ +OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm") +OUTPUT_ARCH(arm) +ENTRY(_start) +MEMORY +{ + /* 2 MBytes of external flash memory */ + FLASH (rx) : ORIGIN = 0x00000000, LENGTH = 0x200000 + /* 256 kBytes of internal zero-waitstate sram */ + IRAM (rw) : ORIGIN = 0x00800000, LENGTH = 0x040000 + /* 256 kBytes of external slow sram */ + ERAM (rw) : ORIGIN = 0x01000000, LENGTH = 0x040000 +} +SECTIONS +{ + /* Provide symbols for the compal loader */ + .compal.loader 0x00000000 (NOLOAD) : { + _compal_loader_start = .; + . = 0x2000; + _compal_loader_end = .; + } > FLASH + + /* Compal-style image header */ + .compal.header 0x00020000 : { + _compal_header_start = .; + KEEP(*(.compal.header)) + *(.compal.header) + . = 0xA0; + _compal_header_end = .; + } > FLASH + + /* Compal-style vector table */ + .compal.vectors 0x000200A0 : { + PROVIDE(_exceptions = .); + KEEP(*(.text.exceptions)) + *(.text.exceptions) + } > FLASH + + /* Compal-style entry point */ + .text.start 0x000200F8 : { + PROVIDE(_start = .); + KEEP(*(.text.start)) + *(.text.start) + } > FLASH + + /* code */ + .text : { + /* regular code */ + *(.text*) + /* gcc voodoo */ + *(.glue_7t) *(.glue_7) *(.vfp11_veneer) *(.v4_bx) + } > FLASH + PROVIDE(_text_start = ADDR(.text)); + PROVIDE(_text_end = ADDR(.text) + SIZEOF(.text)); + + /* constructor pointers */ + .ctors : { + /* ctor count */ + LONG(SIZEOF(.ctors) / 4 - 2) + /* ctor pointers */ + KEEP(*(SORT(.ctors))) + /* end of list */ + LONG(0) + } > FLASH + PROVIDE(_ctor_start = LOADADDR(.ctors)); + PROVIDE(_ctor_end = LOADADDR(.ctors) + SIZEOF(.ctors)); + + /* destructor pointers */ + .dtors : { + /* dtor count */ + LONG(SIZEOF(.dtors) / 4 - 2) + /* dtor pointers */ + KEEP(*(SORT(.dtors))) + /* end of list */ + LONG(0) + } > FLASH + PROVIDE(_dtor_start = LOADADDR(.dtors)); + PROVIDE(_dtor_end = LOADADDR(.dtors) + SIZEOF(.dtors)); + + /* read-only data */ + .rodata : { + *(.rodata*) + } > FLASH + PROVIDE(_rodata_start = ADDR(.rodata)); + PROVIDE(_rodata_end = ADDR(.rodata) + SIZEOF(.rodata)); + + /* pic offset tables */ + .got : { + . = ALIGN(4); + *(.got) + *(.got.plt) *(.igot.plt) *(.got) *(.igot) + . = ALIGN(4); + } > FLASH + PROVIDE(_got_start = ADDR(.got)); + PROVIDE(_got_end = ADDR(.got) + SIZEOF(.got)); + + /* reserved ram */ + .compal.reservedram 0x800000 (NOLOAD) : { + . = 0xff; + } > IRAM + + /* initialized data */ + .data : AT (LOADADDR(.got) + SIZEOF(.got)) { + . = ALIGN(4); + *(.data) + . = ALIGN(4); + } > IRAM + PROVIDE(__data_start = LOADADDR(.data)); + PROVIDE(__data_end = LOADADDR(.data) + SIZEOF(.data)); + PROVIDE(_data_start = ADDR(.data)); + PROVIDE(_data_end = ADDR(.data) + SIZEOF(.data)); + + /* ram code */ + .ramtext : AT (LOADADDR(.data) + SIZEOF(.data)) { + . = ALIGN(4); + *(.ramtext) + . = ALIGN(4); + } > IRAM + PROVIDE(__ramtext_start = LOADADDR(.ramtext)); + PROVIDE(__ramtext_end = LOADADDR(.ramtext) + SIZEOF(.ramtext)); + PROVIDE(_ramtext_start = ADDR(.ramtext)); + PROVIDE(_ramtext_end = ADDR(.ramtext) + SIZEOF(.ramtext)); + + /* uninitialized data */ + .bss (NOLOAD) : { + . = ALIGN(4); + *(.bss) + . = ALIGN(4); + } > IRAM + PROVIDE(__bss_start = ADDR(.bss)); + PROVIDE(__bss_end = ADDR(.bss) + SIZEOF(.bss)); + PROVIDE(_bss_start = __bss_start); + PROVIDE(_bss_end = __bss_end); + + /* end of image */ + . = ALIGN(4); + _end = .; + PROVIDE(end = .); +} -- 1.7.3.4 --------------060605070405050509030107--

1 0

[PATCH] Fix: Correctly handle return value of msgb_pull()
by Andreas Eversberg 05 Jan '13

05 Jan '13

Now it is possible to use osmoload again to flash. Flashing was successfully tested with c123 and c155. --- src/host/osmocon/osmoload.c | 2 +- src/target/firmware/apps/loader/main.c | 7 +++++-- src/target/firmware/apps/loader_mtk/main.c | 4 ++-- 3 files changed, 8 insertions(+), 5 deletions(-) diff --git a/src/host/osmocon/osmoload.c b/src/host/osmocon/osmoload.c index 9b64935..e83f98a 100644 --- a/src/host/osmocon/osmoload.c +++ b/src/host/osmocon/osmoload.c @@ -307,7 +307,7 @@ loader_handle_reply(struct msgb *msg) { length = msgb_pull_u8(msg); crc = msgb_pull_u16(msg); address = msgb_pull_u32(msg); - data = msgb_pull(msg, length); + data = msgb_pull(msg, length) - length; break; case LOADER_MEM_WRITE: length = msgb_pull_u8(msg); diff --git a/src/target/firmware/apps/loader/main.c b/src/target/firmware/apps/loader/main.c index 50a39dd..fd07d0f 100644 --- a/src/target/firmware/apps/loader/main.c +++ b/src/target/firmware/apps/loader/main.c @@ -273,7 +273,7 @@ static void cmd_handler(uint8_t dlci, struct msgb *msg) crc = msgb_pull_u16(msg); address = msgb_pull_u32(msg); - data = msgb_pull(msg, nbytes); + data = msgb_pull(msg, nbytes) - nbytes; mycrc = osmo_crc16(0, data, nbytes); @@ -391,7 +391,7 @@ static void cmd_handler(uint8_t dlci, struct msgb *msg) chip = msgb_pull_u8(msg); address = msgb_pull_u32(msg); - data = msgb_pull(msg, nbytes); + data = msgb_pull(msg, nbytes) - nbytes; mycrc = osmo_crc16(0, data, nbytes); @@ -439,6 +439,9 @@ static void key_handler(enum key_codes code, enum key_states state) puts("Resetting due to keypress.\n"); device_reset(); break; + case KEY_MENU: + device_jump((void *)0x10000); + break; default: break; } diff --git a/src/target/firmware/apps/loader_mtk/main.c b/src/target/firmware/apps/loader_mtk/main.c index 7748dc4..3a12d27 100644 --- a/src/target/firmware/apps/loader_mtk/main.c +++ b/src/target/firmware/apps/loader_mtk/main.c @@ -213,7 +213,7 @@ static void cmd_handler(uint8_t dlci, struct msgb *msg) crc = msgb_pull_u16(msg); address = msgb_pull_u32(msg); - data = msgb_pull(msg, nbytes); + data = msgb_pull(msg, nbytes) - nbytes; mycrc = osmo_crc16(0, data, nbytes); @@ -331,7 +331,7 @@ static void cmd_handler(uint8_t dlci, struct msgb *msg) chip = msgb_pull_u8(msg); address = msgb_pull_u32(msg); - data = msgb_pull(msg, nbytes); + data = msgb_pull(msg, nbytes) - nbytes; mycrc = osmo_crc16(0, data, nbytes); -- 1.7.3.4 --------------060605070405050509030107 Content-Type: text/plain; name="0001-Generate-Compal-E99-binaries-for-loader-and-flash-lo.patch" Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename*0="0001-Generate-Compal-E99-binaries-for-loader-and-flash-lo.pa"; filename*1="tch"

1 0

baseband-devel unsubscribe notification
by mailman-bounces＠lists.osmocom.org 05 Jan '13

05 Jan '13

osmocom(a)slewe.com has been removed from baseband-devel.

1 0

Jump to page:

2026

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

baseband-devel