- baseband-devel - lists.osmocom.org

gsmmap work good but ..
by alishageri 13 Mar '13

13 Mar '13

helow every body here i am from saudia arabia and nice to meet you in this forum i have problem when i compile the tool that writen in wiki i dont konw what is the resone but i fllow all the step that in wiki and when i run gsmmap it work good and it scan the all network and do ccch_scan and cell_scan becouse it is compile correctlly but gsmmap dose not have wireshark and vty of bsc that mean it is not work if any body can make gsmma work with wireshark and osmo-bts transcerver of sylan manout or ann body can make osmocom with all tool and app work as iso like gsmmap thank you for your timing -- View this message in context: http://baseband-devel.722152.n3.nabble.com/gsmmap-work-good-but-tp4025917.h… Sent from the baseband-devel mailing list archive at Nabble.com.

1 0

Decoding SDCCH
by Akib Sayyed 12 Mar '13

12 Mar '13

Dear List I am trying to decode SDCCH. but I am not able to do it properly. Here is part of burst_ind app_ccch.c code. if (rv == 0) { uint8_t chan_type, chan_ts, chan_ss; uint8_t gsmtap_chan_type; struct osmo_phsap_prim pp; /* Send to GSMTAP */ rsl_dec_chan_nr(bi->chan_nr, &chan_type, &chan_ss, &chan_ts); gsmtap_chan_type = chantype_rsl2gsmtap( chan_type, bi->flags & BI_FLG_SACCH ? 0x40 : 0x00 ); gsmtap_send(gsmtap_inst, arfcn, chan_ts, gsmtap_chan_type, chan_ss, ntohl(bi->frame_nr), bi->rx_level, bi->snr, l2, sizeof(l2) ); here l2 is 23 byte. I need to remove send it to lapdm to decode it further then will pass it to RR. Please help me in using Lapdm for decoding :) -- Akib Sayyed Matrix-Shell akibsayyed(a)gmail.com akibsayyed(a)matrixshell.com Mob:- +91-966-514-2243

1 0

Documentation for L1Ctl
by Bhaskar11 11 Mar '13

11 Mar '13

Sylvain, Where are the L1ctl.c calls documented? I want to know more about l1ctl_tx_fbsb_req() options and what they mean. But could not find any reference in 3GPP TS docs. Thanks for your help.

2 3

Error: no such instruction: `eor %edx,%ecx,%ecx,ror'
by Arslan Anjum 03 Mar '13

03 Mar '13

Hello All, I can't compile after the last pull. I know that it is an error with toolchain detection but I have tried almost everything. ------------------------------- As you can see the $PATH variable has the address to gnu-arm-elf binary : arslan@arslan-Lenovo-B575:~/osmocom-bb/src$ echo $PATH /home/arslan/arm-elf/bin:/usr/lib/lightdm/lightdm:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games ------------------------------- and when I list the items in that directory I can clearly see that the binary is there : arslan@arslan-Lenovo-B575:~/arm-elf/bin$ ls arm-elf-addr2line arm-elf-cpp arm-elf-ld arm-elf-size arm-elf-ar arm-elf-g++ arm-elf-nm arm-elf-strings arm-elf-as arm-elf-gcc arm-elf-objcopy arm-elf-strip arm-elf-c++ arm-elf-gcc-4.0.4 arm-elf-objdump arm-elf-cc arm-elf-gccbug arm-elf-ranlib arm-elf-c++filt arm-elf-gcov arm-elf-readelf ------------------------------- But I still get the following error: /home/arslan/osmocom-bb/src/target/firmware/include/asm/swab.h: Assembler messages: /home/arslan/osmocom-bb/src/target/firmware/include/asm/swab.h:32: Error: no such instruction: `eor %edx,%ecx,%ecx,ror' make[4]: *** [gsmtap_util.lo] Error 1 make[4]: Leaving directory `/home/arslan/osmocom-bb/src/shared/libosmocore/build-target/src' make[3]: *** [all] Error 2 make[3]: Leaving directory `/home/arslan/osmocom-bb/src/shared/libosmocore/build-target/src' make[2]: *** [all-recursive] Error 1 make[2]: Leaving directory `/home/arslan/osmocom-bb/src/shared/libosmocore/build-target' make[1]: *** [all] Error 2 make[1]: Leaving directory `/home/arslan/osmocom-bb/src/shared/libosmocore/build-target' make: *** [shared/libosmocore/build-target/src/.libs/libosmocore.a] Error 2 Regards, Arslan Anjum Research Assitant Lahore University of Management Sciences, Pakistan

2 4

Decoding AMR
by Akib Sayyed 02 Mar '13

02 Mar '13

Dear Sylvain While Decoding AMR do need to just decode and pack it into raw amr frames or we need to think about hysterasis and all parts also also there are total 8 codec modes but in band data have details of on 4 codec modes which one to choose out of 8 codec modes from those 8 modes. -- Akib Sayyed Matrix-Shell akibsayyed(a)gmail.com akibsayyed(a)matrixshell.com Mob:- +91-966-514-2243

2 4

Sending DTMF
by dagar 01 Mar '13

01 Mar '13

Hello all does osmocom support dtmf tones and can they be sent during a call if so how? thanks -- View this message in context: http://baseband-devel.722152.n3.nabble.com/Sending-DTMF-tp4025895.html Sent from the baseband-devel mailing list archive at Nabble.com.

2 1

trouble loading trx-firmware
by Erich Dachleger 01 Mar '13

01 Mar '13

Hi list, I am trying, with no success so far ,to chain-load the trx-firmware on my c118 with usb-serial-cable.: ------output----- ./osmocon -p /dev/ttyUSB0 -m c123xor -c ../ ../target/firmware/board/compal_e88/trx.compalram.bin ../ ../target/firmware/board/compal_e88/chainload.highram.bin got 2 bytes from modem, data looks like: 04 81 .. got 5 bytes from modem, data looks like: 1b f6 02 00 41 ....A got 1 bytes from modem, data looks like: 01 . got 1 bytes from modem, data looks like: 40 @ Received PROMPT1 from phone, responding with CMD opening file: No such file or directory ------------------------------------ I also tried switching highram-compalram: ./osmocon -p /dev/ttyUSB0 -m c123xor -c ../ ../target/firmware/board/compal_e88/trx.highram.bin ../ ../target/firmware/board/compal_e88/chainload.compalram.bin And also ./osmocon -p /dev/ttyUSB0 -m c123xor -c target/firmware/board/compal_e88/trx.compalram.bin target/firmware/board/compal_e88/chainload.highram.bin but got same errors. I used the script in the wiki for building the toolchain prior to building the code. ---------------------------------- Any ideas what might be wrong? Regards erich

4 4

Paging Attack 29C3
by choukoumoun 27 Feb '13

27 Feb '13

hello aliens of osmoland! I saw Nico Golde conference, he did a great job. but the code has not been shared?

2 1

[PATCH] Support of UCS2 for SMS/USSD
by Pavel Baturko 27 Feb '13

27 Feb '13

Hi list, Attached 3 patches for decoding UCS2 MT-SMS and incoming USSD. Main idea: convert UCS2 text to UTF-8, check if terminal supports UTF-8 and if yes - print, otherwise - print in hex, and notify VTY to check mobile log (since we can't send UTF text to VTY, if someone knows how to do it - please tell me). Waiting for comments. Thanks, Pavel

3 17

[ANNOUNCE] OsmoDevCon 2013-04-04 till 2013-04-07, Berlin
by Harald Welte 26 Feb '13

26 Feb '13

Dear fellow Osmcoom developers, it is my pleasure to finally announce the date + venue of OsmoDevCon 2013: Date: April 04 through April 07, 2013 Place: IN-Berlin, Lehrter Str. 53, Berlin Like last year, this is an event for developers of the various Osmocom proejects. Reservation and confirmation of reservation is required. The event is free of charge. The Room is made available by IN-Berlin e.V., an Internet related non-profit organization. Lunch catering will be sponsored (so far by sysmocom GmbH, but if any other sponsors come up, we are happy to share the cost). So all you have to cover is your own travel + accomodation costs, as well as breakfast and dinner. If you are an active developer and cannot afford travel/accomodation, please let me know and I'll see if we can do something about it. If you would like to attend, please send a message to laforge(a)gnumonks.org applying for registration of the event. The registration deadline is March 5, i.e. one week from now. There is no detailed schedule of talks yet. I will start a separate discussion suggesting / collecting topics in the next couple of days. More information is (and will be made) available at http://openbsc.osmocom.org/trac/wiki/OsmoDevCon2013 Further discussion regarding the event should be directed at the osmocom-event-orga(a)lists.osmocom.org mailing list, to avoid cross-posting over the various project-specific lists. Best regards and happy hacking, Harald -- - Harald Welte <laforge(a)gnumonks.org> http://laforge.gnumonks.org/ ============================================================================ "Privacy in residential applications is a desirable marketing option." (ETSI EN 300 175-7 Ch. A6)

1 0