baseband-devel

baseband-devel@lists.osmocom.org

3 participants
2004 discussions

Re: in deep trouble
by Bogdan Alecu 03 Feb '11

03 Feb '11

Make sure of the following: 1. Edit ~/.bashrc and put export PATH=$PATH:<YOURPATH>/install/bin , where "yourpath" is your full path to where arm-elf-gcc is located 2. restart your computer (sometimes it helps) 3. run the "make" under the same user that has the above path (no sudo make !!!)

4 3

AGCH question.
by Leonardo Nve 03 Feb '11

03 Feb '11

Hi everyone. I´m coding a fuzzer with osmocombb API, I expect send you something good in a mounth or two (It depends how much work i have). I have two questions. First, I triying a simple SMS handler, to send and receive. With wireshark I don´t see RACH request, I suppose it is because the DSP inside the phone manage it, am I wrong? About this, I don´t have knowledge about electronics, so I don´t want touch, any filter. So I need to see the RACH of the same phone were osmo is running, not another. The second question is about SI AGCH response, I didn´t find the algorithm to know which SDCCH channel gives the BTS to the MS to send/recv LAPDm bursts. --- Leonardo Nve leonardo.nve(a)gmail.com ---

3 3

in little deep trouble
by Sarfraz Alam Khan 03 Feb '11

03 Feb '11

hi, i typed "make osmocon" and "make layer23" and got some output.but i did not get the firmware binaries in *src/target/firmware/board/compal_e88 *and* in **src/host/osmocon/osmocon*, in *src/host/layer23/src/misc* and * layer23/src/mobile*. instead i got files like *.o,*.c etc.. plz help

2 1

in deep trouble
by Sarfraz Alam Khan 03 Feb '11

03 Feb '11

hi, i am having errors while bulding osmocom.I tried finding the solution in archives(that of zaki and others) but was unable to figure out. the error is: configure: error: in `/home/gsm/pro/osmocom-bb/src/shared/libosmocore/build-target': configure: error: C compiler cannot create executables See `config.log' for more details make: *** [shared/libosmocore/build-target/Makefile] Error 77 i am also attaching the config.log file plz help me out.

2 1

[PATCH] Two minor patches for the firmware
by Holger Freyther 02 Feb '11

02 Feb '11

Hi laf0rge, I was building the firmware with a GCC 4.5.2 created by Steve-m's script and had to include limits.h for UINT_MAX. While reading the code I stumbled across a typo... I think the patches can be picked to master as well. holger

2 3

SIMtrace issues
by tsaitgaist 02 Feb '11

02 Feb '11

hi, I'll be listing some issues I found in SIMtrace. This is to warn future users. I don't have time now, but I intend to work on this project in 1 or 2 weeks and correct these bugs. 1. when starting host program simtrace, the firmware will first return ATR. This is an error if simtrace is started after the card has been reseted. The program should use the state of the reset and vcc lines to know the state. 2. when using a usb hub, having a lot of USB traffic, or poor USB signal quality (I don't know exactly), bulk read timeouts can occur in host program simtrace/at91sam7/host/main.c line 230: rc = usb_bulk_read(udev, SIMTRACE_IN_EP, buf, sizeof(buf), 100000); rc is -110 (REQUEST_TIMEOUT). I increased the timeout (100000) so to have less errors (but they still occur), and I ignore this error instead of exiting (tracing still works). 3. it seems simtrace can loose track of the I/O stream after some traffic. see pcsc_apdu.log to see the original, and simtrace_apdu.log for the captured traffic. in the end, simtrace misses: APDU: A0 C0 00 00 0F and does a wrong following APDU parsing The problem occurs when using a OmniKey CardMan 5321 and Alcor Micro AU9520. Thus the reader should not be the origin. Also, if only the command where the error occurs is sent, no bytes are skipped. But another error occurs (see next bug) 4. when executing only the last commands, then it is wrongly interpreted (as ATR), but no bytes are skipped ATR (12): 3b 0a 41 00 3f 43 00 01 50 29 01 02 ATR (66): a0 a4 00 00 02 a4 7f 20 9f 17 a0 a4 00 00 02 a4 6f ad 9f 0f a0 c0 00 00 0f c0 00 00 00 03 6f ad 04 00 04 f0 44 01 02 00 00 90 00 a0 b0 00 00 03 b0 00 00 00 90 00 3b 0a 41 00 3f 43 00 01 50 29 01 02 I already wrote a SIM traffic parser for the PC before simtrace appeared. I used a logic analyzer to record the traffic. I will integrate the ATR and APDU parsing/checking into the simtrace firmware. Wrong recorded traffic will be discarded instead of affecting the rest of the parsing. thanks, kevin

3 3

cell_log and debug
by Dario Lombardo 01 Feb '11

01 Feb '11

Shame on me when I'm not able to print debug messages from cell_log :) but... cell_log -d DRR,3 doesn't give me any additional output. I would like to see the line LOGP(DRR, LOGL_INFO, "IMMEDIATE ASSIGNMENT:\n"); from cell_log.c. Can anybody help me?

2 1

http mirror for osmocom-bb.git ?
by Sébastien Lorquet 01 Feb '11

01 Feb '11

Hi, I know we have a http git mirror for openbsc. Do we have the same for osmocom-bb.git? the git tcp port is censored where I'm connected from. Sorry if I misread the list archive :( Sebastien

3 3

osmocomSIM
by tsaitgaist 31 Jan '11

31 Jan '11

Hi, how about opening the sub-project osmocomSIM ? This could include: - SIMtrace from Harald - SAP server from Andreas - SIM on javacard from Sébastien - future software/virtual SIM which could use SAP server - speaking about A38, Ki, SIM features, ... kevin

2 2

What I am doing wrong? G2
by Панфилов Дмитрий 31 Jan '11

31 Jan '11

Hi! So, I decide to play with my G2 SciPhone (My phone has configuration as follows: 512Mb (64MB) NAND + 32MB RAM) But I could not run U-Boot... The first step seems to be good. I run Osmocon and download "loader" to the phone. I got "Running on mt62xx in environment mtkram HW_CODE = 0x6235" message. After executing $ ./osmoload memload 0x500000 u-boot.bin I can see progress and successfull download of u-boot.bin First of all I tried to use u-boot from here http://downloads.qi-hardware.com/people/marcin/g2_uboot.bin (http://downloads.qi-hardware.com/people/marcin/g2_uboot.bin) Executing $ ./osmoload jump 0x500000 leads to... nothing. I can see black screen. That's all. Also I compilled u-boot from git using toolchain kindly given by Andrew :-) $ ./osmoload jump 0x500000 leads to gray screen after flashing white for a moment. It looks like wrong LCD controller or driver. So... The simple question. What I am doing wrong? :)

1 0

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

baseband-devel